4302.2004

KEB2 Power entry modules without line filter https://www.schurter.com /PG05 IEC Appliance Inlet C14 with Line Switch 2-pole IEC connector C14 with line switch 2-pole Snap-in mounting from front side illuminated, red IEC connector C14 with line switch 2-pole, illuminated, green Screw-on from front side Snap-in version C14 See below: Approvals and Compliances 70° C Description - Panel mount : Screw-on version from front or rear side, snap-in version front side - 2 Functions : Appliance Inlet Protection class I , Line Switch 2-pole - Quick connect terminals 4.8 x 0.8 mm Characteristics - All single elements are already wired - Unwired versions available on request - Line switch non-illuminated or illuminated Other versions on request - Unwired versions - Line switch with other rocker marking References Alternative: version with line filter   KFB2  We recommend for new applications the type   DC11  Weblinks pdf data sheet, html datasheet, General Product Information, Approvals, Distributor-Stock-Check, Accessories, Detailed request for product Technical Data Ratings IEC Ratings UL/CSA Dielectric Strength Allowable Operation Temperature IP-Protection Protection against electric shock Terminal Panel Thickness S Material: Housing   10 A / 250 VAC; 50 Hz 15 A / 250 VAC; 60 Hz > 2.5 kVAC between L-N > 3 kVAC between L/N-PE (1 min/50 Hz) -25 °C to 70 °C Appliance inlet/-outlet Line Switch C14 acc. to IEC 60320-1, UL 60320-1, CSA C22.2 no. 60320-1 (for cold conditions) pin-temperature 70 °C, 10 A, Protection Class I Rocker switch 2-pole, non-illuminated or illuminated, acc. to IEC 61058-1 Technical Details front side IP40 acc. to IEC 60529 Suitable for appliances with protection class I acc. to IEC 61140 Quick connect terminals 4.8 x 0.8 mm Screw: max 6 mm Mounting screw torque max 0.5 Nm Snap-in: 1.5/2/2.5 mm Thermoplastic, black, UL 94V-0 Approvals and Compliances Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in  Details about Approvals SCHURTER products are designed for use in industrial environments. They have approvals from independent testing bodies according to national and international standards. Products with specific characteristics and requirements such as required in the automotive sector according to IATF 16949, medical technology according to ISO 13485 or in the aerospace industry can be offered exclusively with customer-specific, individual agreements by SCHURTER. Connectors 1 KEB2 Power entry modules without line filter https://www.schurter.com /PG05 Approvals The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products. Approval Reference Type: KEB2 Approval Logo Certificates Certification Body Description VDE Approvals VDE VDE Certificate Number: 40021945 UL Approvals UL UR File Number: E96454 CCC Approvals CCC CCC Certificate Number: Design Standard Description Designed according to IEC 60320-1 Appliance couplers for household and similar general purposes Designed according to IEC 61058-1 Switches for appliances. Part 1. General requirements Designed according to UL 60320-1 Standard for Attachment Plugs and Receptacles Designed according to CSA C22.2 no. 60320-1 General Use Receptacles, Attachment Plugs, and Similar Wiring Devices Design Standard Description Suitable for applications acc. IEC/UL 62368-1 Audio/video, information and communication technology equipment - Part 1: Safety requirements Details Initiator Description CE declaration of conformity SCHURTER AG The CE marking declares that the product complies with the applicable requirements laid down in the harmonisation of Community legislation on its affixing in accordance with EU Regulation 765/2008. UKCA declaration of conformity SCHURTER AG The UKCA marking declares that the product complies with the applicable requirements laid down in the British Amendment of Regulation (EC) 765/2008. RoHS SCHURTER AG Directive RoHS 2011/65/EU, Amendment (EU) 2015/863 China RoHS SCHURTER AG The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March 2007. It is similar to the EU directive RoHS. REACH SCHURTER AG On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration, Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as "REACH") entered into force. Product standards Product standards that are referenced Organization Application standards Application standards where the product can be used Organization Compliances The product complies with following Guide Lines Identification Dimensions [mm] Snap-in mounting Screw-on mounting 25.5 25.5 24 24 0 R 3 -0.2 0 R 3 -0.2 R 2.5 R 2.5 27.4 4.8x0.8 17.8 27.5 +0.2 0 27.4 4.8x0.8 17.8 27.7 27.7 Connectors 27.5 +0.2 0 51 ±0.15 +0.2 0 42 59 51 +0.2 0 42 44.5 41.7 M3/ø 3.6 ø 3.2 R4 R4 2 2 R6 41.7 S 30 2.2 30 2 ±0.1 ø 6.3x90° 2.2 KEB2 Power entry modules without line filter https://www.schurter.com /PG05 Diagrams 2 1 2 1 1a 2a 1a 2a L N L N E E illuminated Non-illuminated All Variants Panel mounting Panel Thickness s [mm] Illumination Rated voltage 125/250 [V] Color Order Number Snap-in 1.5 l 250 red 4302.2102 Snap-in 2 l 250 red 4302.2103 Snap-in 2.5 l 250 red 4302.2104 Snap-in 1.5 l 250 green 4302.2142 Snap-in 2 l 250 green 4302.2143 Snap-in 2.5 l 250 green 4302.2144 Snap-in 1.5 - - 4302.2002 █ Snap-in 2 - - 4302.2003 █ Snap-in 2.5 - - 4302.2004 █ Screw - l 250 red 4302.2101 █ Screw - l 250 green 4302.2141 █ Screw - - - 4302.2001 █ █ Most Popular. Availability for all products can be searched real-time:https://www.schurter.com/en/Stock-Check/Stock-CheckSCHURTER Packaging unit   50 Pcs  Accessories Description Assorted_Covers Rear Cover   0859.0075   RC320 Rear Cover for Power Entry Module   Connectors 3 KEB2 Power entry modules without line filter https://www.schurter.com /PG05 Cord_retaining_kits Cord retaining strain relief   Flat head, A 4700.0001   Mating Outlets/Connectors Category / Description Appliance Outlet Overview complete 4787, Mounting: Screw-on mounting, Appliance Outlet: IEC Solder terminals, 10 A, Suitable for appliances with protection class I 4787 4788, Mounting: Snap-in version, Appliance Outlet: IEC Solder / Quick Connect, 10 A, Suitable for appliances with protection class I 4788 IEC Appliance Outlet F or H, Screw-on Mounting, Front Side, Solder, PCB or Quick-connect Terminal 5091   Connector Overview complete 4782 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4782 4785 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4785 4300-06 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4300-06 4781 Mounting: Power Cord, Cable, Connector: IEC C15 4781 4784 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C15 4784 11.08.2023   4 Connectors The specifications, descriptions and illustrations indicated in this document are based on current information. All content is subject to modifications and amendments. Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability and test each product selected for their own applications.