4304.6058.

6762 Power entry modules without line filter https://www.schurter.com /PG05 IEC Appliance Inlet C14 or C18 with Line Switch 1- or 2-pole and Fuseholder 1-pole C14 C18 70° C 70° C Approvals and Compliances Description - Panel Mount : Snap-in or screw-on mounting , from front side Appliance Inlet , protection class I or II , Fuseholder for fuse-links 5 x 20 mm , Line Switch - Snap-in version with 1- or 2-pole line switch available - Screw-on version only with 2-pole line switch - Meets the requirements of IEC 60335-1 for appliances in unattended use. This includes the enhanced requirements of glow wire tests acc. to IEC 60695-2-12 and -13. - Solder terminals or quick connect terminals Technical Data Allowable Operation Temperature IP-Protection Insulation cover Panel Thickness S Material: Housing - Line switch non-illuminated or illuminated Weblinks pdf datasheet, html-datasheet, General Product Information, DistributorStock-Check, Accessories, Detailed request for product   Ratings IEC Ratings UL/CSA Dielectric Strength Terminal Characteristics 10 A / 250 VAC; 50 Hz 10 A / 250 VAC; 60 Hz > 1.5 kVAC between L-N > 3 kVAC between L/N-PE (1 min/50 Hz) -25 °C to 70 °C from front side IP 40 acc. to IEC 60529 Suitable for appliances with protection class I or II acc. to IEC 61140 Solder terminals or quick connect terminals Screw Mounting screw torque max 0.5 Nm Snap-in1.0 - 1.5/2.0 - 2.5 mm PA6, black, UL 94V-0 appliance inlet/-outlet Fuseholder Power Acceptance @ Ta > 23°C Line Switch C14 / C18 acc. to IEC 60320-1 UL 498, CSA C22.2 no. 42 (for cold conditions) pin-temperature 70 °C, 10 A, Protection Class I or II 1-pole, acc. to IEC 60127-6, for fuse-links 5 x 20 mm Admissible power acceptance at higher ambient temperature see derating curves Rocker switch 1 or 2 pole, non-illuminated or illuminated black, acc. to IEC 61058-1 Technical Details Approvals and Compliances Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in   Details about Approvals Approvals The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products. Approval Reference Type: 6762 Approval Logo Certificates Certification Body Description SEMKO Approvals SEMKO Certificate Number: SE/09137-2A UL Approvals UL UL File Number: E93617 CSA Approvals CSA CSA Certification Record: 27324 CSA Approvals CSA CCC File Number: 27324 Connectors 1 6762 Power entry modules without line filter https://www.schurter.com /PG05 Product standards Product standards that are referenced Organization Design Standard Description Designed according to IEC 60320-1 Appliance couplers for household and similar general purposes Designed according to IEC 60127-6 Miniature fuses. Part 6. Fuse-holders for miniature fuse-links Designed according to IEC 61058-1 Switches for appliances. Part 1. General requirements Designed according to UL 498 Standard for Attachment Plugs and Receptacles Designed according to CSA C22.2 no. 42 General Use Receptacles, Attachment Plugs, and Similar Wiring Devices Design Standard Description Designed for applications acc. IEC/UL 60950 IEC 60950-1 includes the basic requirements for the safety of information technologyequipment. Designed for applications acc. IEC 60335-1 Safety of electrical appliances for household and similar purposes. Meets the requirements for appliances in unattended use. This includes the enhanced requirements of glow wire tests acc. to IEC 60695-2-12 and -13. Details Initiator Description CE declaration of conformity SCHURTER AG The CE marking declares that the product complies with the applicable requirements laid down in the harmonisation of Community legislation on its affixing in accordance with EU Regulation 765/2008. RoHS SCHURTER AG EU Directive RoHS 2011/65/EU China RoHS SCHURTER AG The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March 2007. It is similar to the EU directive RoHS. REACH SCHURTER AG On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration, Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as "REACH") entered into force. Application standards Application standards where the product can be used Organization Compliances The product complies with following Guide Lines Identification 2 Connectors 6762 Power entry modules without line filter https://www.schurter.com /PG05 Dimensions [mm] Screw-on mounting 50 18 ø 25 58.6 90˚ 3 6. 59 ± 0.10 3. 65 63 ø 27.5 ± 0.10 27.1 8.3 N 13.7 L ø 3.4/ M3 3.2 R 1 4 3 R 28 25.6 40 max. 27.5 3 40 5 Snap-in mounting 27.4 ± 0.10 27.1 X 65 58.6 24.7 N 30 3.2 R 3 13.4 L 27.3 max. 29 10 Panel thickness 1.0 - 1.5 mm 1.6 - 2.0 mm 3.3 Connectors X 61.3 +_0.1 mm 61.9 +_0.1 mm 3 6762 Power entry modules without line filter https://www.schurter.com /PG05 Derating Curves Fuses 5 x 20 mm (1-pole) Admissible power acceptance in Watt 2.5 2.0 I = 1.0 In 1.5 I = 0.7 In I = < < In 1.0 0.5 0.0 0 20 40 60 80 100 Ambient air temperature Ta °C Config. Code 6762|-|H|-|A|B|C|N|-|D|-|E|G|O|P|  The characters are placeholders for the correspondingly keys of selections from the key tables.    6762|-| H |-|A|B|C|N|-|D|-|E|G|O|P| = Type Terminal Ground Type Configuration key protection class II B protection class I X Configuration key without terminal 0 solder terminal 1 long solder terminal (L = 8.5 mm) 3 Blade terminal (4.8 x 0.8 mm) 8 Blade terminal (6.3 x 0.8 mm) 9 Symbols similar as in table A 6762|-|H|-| A |B|C|N|-|D|-|E|G|O|P| = Terminals Terminal L Configuration key 6762|-|H|-|A|B|C| N |-|D|-|E|G|O|P| = Terminal Fuseholder Terminal Fuseholder solder terminal 1   long solder terminal (L = 8.5 mm) Configuration key solder terminal 1 Blade terminal (4.8 x 0.8 mm) 8 3   Blade terminal (4.8 x 0.8 mm) 6762|-|H|-|A|B|C|N|-| D |-|E|G|O|P| = Color 8   Blade terminal (6.3 x 0.8 mm) Color Configuration key Black A 9   6762|-|H|-|A|B|C|N|-|D|-| E |G|O|P| = Style 6762|-|H|-|A| B |C|N|-|D|-|E|G|O|P| = Terminals Terminal N Configuration key solder terminal 1 long solder terminal (L = 8.5 mm) 3 Blade terminal (4.8 x 0.8 mm) 8 Blade terminal (6.3 x 0.8 mm) 9 Symbols similar as in table A Connectors Configuration key flange with countersunk holes 1 flange with through holes 2 snap-in standard type 3 insert type 5 6762|-|H|-|A|B|C|N|-|D|-|E| G |O|P| = Dimension S 6762|-|H|-|A|B| C |N|-|D|-|E|G|O|P| = Terminals 4 Style 6762 Power entry modules without line filter https://www.schurter.com /PG05 Dimension "S" Configuration key 00 6762|-|H|-|A|B|C|N|-|D|-|E|G|O| P | = Switches Switches The dimension "S" is displayed in (1/10 mm). This information is also valid for the order code 6762|-|H|-|A|B|C|N|-|D|-|E|G| O |P| = Features Features Configuration key Configuration key dead cover 1 unipolar switch, 4,8mm blade terminal, black rocker 2 unipolar switch, solder terminal, black rocker 3 bipolar switch, 4,8mm blade terminal, black rocker 4 bipolar switch, solder terminals, black rocker 5 dead cover 1 bipolar switch, 4,8mm blade terminal, rocker red illuminated 6 holder for 1 fuse (text legible, when inlet on top) 2 bipolar switch, solder terminal, rocker red illuminated 7 holder for 1 fuse (text legible, when inlet on bottom) 3 bipolar switch, 4,8mm blade terminals, rocker green illuminated 8 bipolar switch, solder terminals, rocker green illuminated 9 All Variants Type Terminal L Terminal N Terminal Ground Terminal Fuseholder Style Features Switches Config. Code Order Number protection class II Blade terminal (4.8 x 0.8 mm) Blade terminal (4.8 x 0.8 mm) without terminal Blade terminal (4.8 x 0.8 mm) flange with countersunk holes holder for 1 fuse (text legible, when inlet on top) bipolar switch, 4,8mm blade terminal, black rocker 6762-B-8808-A-10024  4304.6049 protection class II Blade terminal (4.8 x 0.8 mm) Blade terminal (4.8 x 0.8 mm) without terminal Blade terminal (4.8 x 0.8 mm) snap-in standard type holder for 1 fuse (text legible, when inlet on top) unipolar switch, 4,8mm blade terminal, black rocker 6762-B-8808-A-30022  4304.6050 protection class II Blade terminal (4.8 x 0.8 mm) Blade terminal (4.8 x 0.8 mm) without terminal Blade terminal (4.8 x 0.8 mm) snap-in standard type holder for 1 fuse (text legible, when inlet on top) bipolar switch, 4,8mm blade terminal, black rocker 6762-B-8808-A-30024  4304.6051 protection class I solder terminal solder terminal solder terminal solder terminal flange with countersunk holes holder for 1 fuse (text legible, when inlet on top) dead cover 6762-X-1111-A-10021  4304.6052 protection class I solder terminal solder terminal solder terminal solder terminal flange with countersunk holes holder for 1 fuse (text legible, when inlet on top) bipolar switch, 4,8mm blade terminal, black rocker 6762-X-1111-A-10024  4304.6053 protection class I solder terminal solder terminal solder terminal solder terminal flange with countersunk holes holder for 1 fuse (text legible, when inlet on top) bipolar switch, solder terminals, black rocker 6762-X-1111-A-10025  4304.6054 protection class I solder terminal solder terminal solder terminal solder terminal flange with countersunk holes holder for 1 fuse (text legible, when inlet on bottom) bipolar switch, 4,8mm blade terminal, black rocker 6762-X-1111-A-10034  4304.6055 █ protection class I long solder terminal (L = 8.5 mm) long solder terminal (L = 8.5 mm) long solder terminal (L = 8.5 mm) solder terminal snap-in standard type holder for 1 fuse (text legible, when inlet on top) bipolar switch, solder terminals, black rocker 6762-X-3331-A-30025  4304.6056 protection class I Blade terminal (4.8 x 0.8 mm) Blade terminal (4.8 x 0.8 mm) Blade terminal (4.8 x 0.8 mm) Blade terminal (4.8 x 0.8 mm) flange with countersunk holes holder for 1 fuse (text legible, when inlet on top) dead cover 6762-X-8888-A-10021  4304.6057 protection class I Blade terminal (4.8 x 0.8 mm) Blade terminal (4.8 x 0.8 mm) Blade terminal (4.8 x 0.8 mm) Blade terminal (4.8 x 0.8 mm) flange with countersunk holes holder for 1 fuse (text legible, when inlet on top) bipolar switch, 4,8mm blade terminal, black rocker 6762-X-8888-A-10024  4304.6058 protection class I Blade terminal (4.8 x 0.8 mm) Blade terminal (4.8 x 0.8 mm) Blade terminal (4.8 x 0.8 mm) Blade terminal (4.8 x 0.8 mm) flange with countersunk holes holder for 1 fuse (text legible, when inlet on top) bipolar switch, 4,8mm blade terminal, rocker red illuminated 6762-X-8888-A-10026  4304.6059 protection class I Blade terminal (4.8 x 0.8 mm) Blade terminal (4.8 x 0.8 mm) Blade terminal (4.8 x 0.8 mm) Blade terminal (4.8 x 0.8 mm) flange with countersunk holes holder for 1 fuse (text legible, when inlet on top) bipolar switch, 4,8mm blade terminals, rocker green illuminated 6762-X-8888-A-10028  4304.6060 protection class I Blade terminal (4.8 x 0.8 mm) Blade terminal (4.8 x 0.8 mm) Blade terminal (4.8 x 0.8 mm) Blade terminal (4.8 x 0.8 mm) flange with countersunk holes holder for 1 fuse (text legible, when inlet on bottom) bipolar switch, 4,8mm blade terminal, black rocker 6762-X-8888-A-10034  4304.6061 protection class I Blade terminal (4.8 x 0.8 mm) Blade terminal (4.8 x 0.8 mm) Blade terminal (4.8 x 0.8 mm) Blade terminal (4.8 x 0.8 mm) snap-in standard type holder for 1 fuse (text legible, when inlet on top) dead cover 6762-X-8888-A-30021  4304.6062 █ Connectors 5 6762 Power entry modules without line filter https://www.schurter.com /PG05 Type Terminal L Terminal N Terminal Ground Terminal Fuseholder Style Features Switches Config. Code protection class I Blade terminal (4.8 x 0.8 mm) Blade terminal (4.8 x 0.8 mm) Blade terminal (4.8 x 0.8 mm) Blade terminal (4.8 x 0.8 mm) snap-in standard type holder for 1 fuse (text legible, when inlet on top) unipolar switch, 4,8mm blade terminal, black rocker 6762-X-8888-A-30022  4304.6063 protection class I Blade terminal (4.8 x 0.8 mm) Blade terminal (4.8 x 0.8 mm) Blade terminal (4.8 x 0.8 mm) Blade terminal (4.8 x 0.8 mm) snap-in standard type holder for 1 fuse (text legible, when inlet on top) bipolar switch, 4,8mm blade terminal, black rocker 6762-X-8888-A-30024  4304.6064 protection class I Blade terminal (4.8 x 0.8 mm) Blade terminal (4.8 x 0.8 mm) Blade terminal (4.8 x 0.8 mm) Blade terminal (4.8 x 0.8 mm) snap-in standard type holder for 1 fuse (text legible, when inlet on top) bipolar switch, solder terminals, black rocker 6762-X-8888-A-30025  4304.6065 protection class I Blade terminal (4.8 x 0.8 mm) Blade terminal (4.8 x 0.8 mm) Blade terminal (4.8 x 0.8 mm) Blade terminal (4.8 x 0.8 mm) snap-in standard type holder for 1 fuse (text legible, when inlet on top) bipolar switch, 4,8mm blade terminal, rocker red illuminated 6762-X-8888-A-30026  4304.6066 protection class I Blade terminal (4.8 x 0.8 mm) Blade terminal (4.8 x 0.8 mm) Blade terminal (4.8 x 0.8 mm) Blade terminal (4.8 x 0.8 mm) snap-in standard type holder for 1 fuse (text legible, when inlet on top) bipolar switch, 4,8mm blade terminals, rocker green illuminated 6762-X-8888-A-30028  4304.6067 protection class I Blade terminal (4.8 x 0.8 mm) Blade terminal (4.8 x 0.8 mm) Blade terminal (4.8 x 0.8 mm) Blade terminal (4.8 x 0.8 mm) snap-in standard type holder for 1 fuse (text legible, when inlet on bottom) bipolar switch, 4,8mm blade terminal, rocker red illuminated 6762-X-8888-A-30036  4304.6068 protection class I Blade terminal (6.3 x 0.8 mm) Blade terminal (6.3 x 0.8 mm) Blade terminal solder terminal (6.3 x 0.8 mm) snap-in standard type holder for 1 fuse (text legible, when inlet on top) unipolar switch, 4,8mm blade terminal, black rocker 6762-X-9991-A-30022  4304.6069 protection class I Blade terminal (6.3 x 0.8 mm) Blade terminal (6.3 x 0.8 mm) Blade terminal (6.3 x 0.8 mm) Blade terminal (4.8 x 0.8 mm) flange with countersunk holes holder for 1 fuse (text legible, when inlet on top) bipolar switch, 4,8mm blade terminal, black rocker 6762-X-9998-A-10024  4304.6070 protection class I Blade terminal (6.3 x 0.8 mm) Blade terminal (6.3 x 0.8 mm) Blade terminal (6.3 x 0.8 mm) Blade terminal (4.8 x 0.8 mm) flange with countersunk holes holder for 1 fuse (text legible, when inlet on top) bipolar switch, 4,8mm blade terminal, rocker red illuminated 6762-X-9998-A-10026  4304.6071 protection class I Blade terminal (6.3 x 0.8 mm) Blade terminal (6.3 x 0.8 mm) Blade terminal (6.3 x 0.8 mm) Blade terminal (4.8 x 0.8 mm) snap-in standard type holder for 1 fuse (text legible, when inlet on top) bipolar switch, 4,8mm blade terminal, black rocker 6762-X-9998-A-30024  4304.6072 protection class I Blade terminal (4.8 x 0.8 mm) Blade terminal (4.8 x 0.8 mm) Blade terminal solder terminal (4.8 x 0.8 mm) snap-in standard type holder for 1 fuse (text legible, when inlet on top) bipolar switch, 4,8mm blade terminal, black rocker 6762-X-8881-A-30024  4304.6120 The listet variants should be available from stock Other versions on request www.schurter.com/contact █ Most Popular. Availability for all products can be searched real-time:https://www.schurter.com/en/Stock-Check/Stock-Check-SCHURTER Packaging unit   6 50 Pcs  Connectors Order Number █ 6762 Power entry modules without line filter https://www.schurter.com /PG05 Accessories Description Wire Harness Wire harness for SCHURTER products   Assorted Covers Rear Cover   Mating Outlets/Connectors Category / Description Connector Overview complete   4782 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4782 4022 Mounting: Power Supply Cord, 3 x 1.5 mm², Screw clamps, Connector: IEC C13 4022 4785 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4785 4300-06 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4300-06 4012 Mounting: Power Supply Cord, 3 x 1.5 mm², Screw clamps, Connector: IEC C13 4012 Connector further types to 6762 ... Interconnection Cord Overview complete Cord Sets 10 A, Interconnection, 2.0 m, IEC H05VV-F3G1.0, black 6007.0204 Cord Sets 10 A, Interconnection, 1.0 m, Connector IEC C13, H05VV-F3G1.0, black 6007.0212 Cord Sets 10 A, Interconnection, 2.0 m, Connector IEC C13, H05VV-F3G1.0, black 6007.0214 Interconnection Cord further types to 6762   Power Supply Cord Overview complete   Cord Sets 10 A, Europlug, 2.5 m, Connector IEC C13, H05VV-F3G1.0, black 6004.0215 Cord Sets 10 A, Europlug, 2.5 m, Connector IEC C13, H05VV-F3G1.0, black 6003.0215 Cord Sets 10 A, uninsulated wires, 2.0 m, Connector IEC C13, H05VV-F3G1.0, black 6000.0224 Cord Sets 10 A, uninsulated wires, 2.0 m, Connector IEC C13, H05VV-F3G1.0, black 6000.0214 Cord Sets 10 A, United Kingdom, 2.5 m, Connector IEC C13, H05VV-F3G1.0, black 6044.0215 Power Supply Cord further types to 6762 ... Power Supply or Interconnection Cord Overview complete Cord Sets 10 A, United Kingdom, 2.0 m, Connector IEC H05VV-F3G1.0, black 6044.0204 Power Supply or Interconnection Cord further types to 6762   Connectors 7 6762 Power entry modules without line filter https://www.schurter.com /PG05 Mating Outlets/Connectors shuttered Power Cord Overview complete Power cord with IEC connector C17, V-Lock, straight VAC17KS Power Cord further types to 6762 01.12.2017   8 Connectors The specifications, descriptions and illustrations indicated in this document are based on current information. All content is subject to modifications and amendments. Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability and test each product selected for their own applications.