4400.0008

T11-211 Thermal (T- and TA-Line) https://www.schurter.com /PG17_20 Circuit Breaker for Equipment thermal, Threaded neck type, Reset type, Quick connect terminals See below: Approvals and Compliances Description - Threaded neck type - Thermal circuit breaker - 1‑pole - Reset type - Quick connect terminals 6.3 x 0.8 mm Unique Selling Proposition Technical Data Degree of Protection Dielectric Strength Insulation Resistance Endurance typical Endurance minimum - Power tools - Household Equipment - Power supplies and chargers - Industrial appliances Weblinks pdf data sheet, html datasheet, General Product Information, DistributorStock-Check, Detailed request for product, Product News - Compact design - Positively trip-free release - Available with cover - Different mounting possibilities Rated Voltage AC Rated Voltage DC Rated current range AC Conditional short circuit capacity Inc Short circuit capacity Icn Applications   AC 240 VAC 48 VDC 0.05 - 16 A IEC 60934: PC1, AC 240 V: 2 kA  IEC 60934: at In < 6.5 A/240 VAC : 8 x In  IEC 60934: at In ≥ 6.5 A/240 VAC : 96 A  front side IP40 acc. to IEC 60529 50 Hz: > 1.5 kV Impulse 1.2/50 μs: > 2.5 kV 500 VDC > 100 MΩ 2 x Ir: 500 switching cycles Reset type   AC : 2 x Ir , cos φ 0.6 :   DC : 2 x Ir , L/R = 2 - 3 ms :   50 switching cycles Overload ␣ Allowable Operation Temp. Vibration Resistance Shock Resistance Tripping Type Actuation Type Weight IEC: min. 40 trips @ 6 x Ir, cos φ 0.6 UL / CSA: min. 50 trips @ 1.5 x Ir, cos φ 0.75 -5 °C to 60 °C ± 1.5 mm @ 10 - 60 Hz acc. to IEC 60068-2-6, test Fc 5 G @ 60 - 500 Hz acc. to IEC 60068-2-6, test Fc 100 G / 6 ms acc. to IEC 60068-2-27, test Ea Thermal  Reset type  ca.  10 g Approvals and Compliances Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in  Details about Approvals SCHURTER products are designed for use in industrial environments. They have approvals from independent testing bodies according to national and international standards. Products with specific characteristics and requirements such as required in the automotive sector according to IATF 16949, medical technology according to ISO 13485 or in the aerospace industry can be offered exclusively with customer-specific, individual agreements by SCHURTER. Circuit Breakers 1 T11-211 Thermal (T- and TA-Line) https://www.schurter.com /PG17_20 Approvals The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products. Approval Reference Type: T11 Approval Logo Certificates Certification Body Description VDE Approvals VDE VDE Certificate Number: 99759 UL Approvals UL UR File Number: E71572 CCC Approvals CCC CCC Certificate Number: 2020970307003506 Design Standard Description Designed according to IEC 60934 Circuit-breakers for equipment (CBE) Designed according to UL 1077 Standard for Supplementary Protectors for Use in Electrical Equipment Designed according to CSA C22.2 No. 235 Supplementary Protectors Designed according to GB 17701 Circuit-breaker for equipment Design Standard Description Suitable for applications acc. IEC/UL 62368-1 Audio/video, information and communication technology equipment - Part 1: Safety requirements Details Initiator Description CE declaration of conformity SCHURTER AG The CE marking declares that the product complies with the applicable requirements laid down in the harmonisation of Community legislation on its affixing in accordance with EU Regulation 765/2008. UKCA declaration of conformity SCHURTER AG The UKCA marking declares that the product complies with the applicable requirements laid down in the British Amendment of Regulation (EC) 765/2008. RoHS SCHURTER AG Directive RoHS 2011/65/EU, Amendment (EU) 2015/863 China RoHS SCHURTER AG The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March 2007. It is similar to the EU directive RoHS. REACH SCHURTER AG On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration, Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as "REACH") entered into force. Product standards Product standards that are referenced Organization Application standards Application standards where the product can be used Organization Compliances The product complies with following Guide Lines Identification 2 Circuit Breakers T11-211 Thermal (T- and TA-Line) https://www.schurter.com /PG17_20 Dimension [mm] T11-211 7,5A T11-211N Ø4 10 9 3.6 1 3 2 1) 11 9.2 44 34.5 19 50.2 2.5 6 11.0 13.5 3/8-27UNS-2A 15.2 6.3 SW 14 1) max. torque 0.6Nm 8.9   6 Ø 9. Circuit Breakers 3 T11-211 Thermal (T- and TA-Line) https://www.schurter.com /PG17_20 Diagrams Rated current ≤7,5 A Rated current >7,5 A 1 1 2 3 Shunt terminal T11-...N ≤6,5 A 1 2 3 Typical internal resistance per pole Rated Current [A] Internal Resistance [Ω] 0.05 380.000 0.50 5.200 1.00 1.350 2.00 0.300 3.00 0.130 4.00 0.080 5.00 0.040 6.00 0.040 7.00 0.020 8.00 0.012 9.00 0.012 10.00 0.011 11.00 0.0095 12.00 0.0095 13.00 0.0085 14.00 0.0085 15.00 0.0075 16.00 0.0075 4 Circuit Breakers T11-211 Thermal (T- and TA-Line) https://www.schurter.com /PG17_20 Effect of ambient temperature The units are calibrated for an ambient temperature of +23°C. To determine the rated current for a lower or higher ambient temperature, use a correction factor (typical value) from the table below: Ambient Temperature [°C] Correction factor -5 0.87 0 0.90 +10 0.95 +23 1.00 +30 1.04 +40 1.10 +50 1.15 +60 1.20 Example: Rated current = 5 A, Environmental temperature = 40 °C, --> Correction factor = 1.1, Resulting current = 5.5 A --> Round to next higher rated current: 6 A Time-Current-Curves [ min ] [ sec] 10`000 < 6,5 A > 6,5 A 60 30 20 2`000 1`000 10 500 5 200 Time in Seconds 100 1 50 20 10 5 2 1 0,5 0,3 0,2 0,1 1,05 1,35 2 3 4 5 8 10 Multiple of Rated Current In Ambient temperature +23° Config. Code T11|-|1|2|3|A|B|-|1.23|  The characters are placeholders for the correspondingly keys of selections from the key tables. T11|-| 1 |2|3|A|B|-|1.23| = Mounting Mounting Threaded neck type 6 mm Terminal Configuration key 2 T11|-|1| 2 |3|A|B|-|1.23| = Actuation Type Actuation Type Reset type Configuration key 1 Configuration key Quick connect terminal 6.3x0.8mm 1 T11|-|1|2|3| A |B|-|1.23| = Shunt terminal Shunt terminal Configuration key Shunt terminal N T11|-|1|2|3|A| B |-|1.23| = Setting indication T11|-|1|2| 3 |A|B|-|1.23| = Terminal Circuit Breakers 5 T11-211 Thermal (T- and TA-Line) https://www.schurter.com /PG17_20 Setting indication Configuration key Setting indication Rated current R Configuration key 2.1 A 2.1 2.3 A 2.3 2.5 A 2.5 Configuration key 2.8 A 2.8 3.0 A 3 0.05 3.3 A 3.3 0.1 A 0.1 3.5 A 3.5 0.15 A 0.15 4.0 A 4 0.2 A 0.2 4.5 A 4.5 0.3 A 0.3 5.0 A 5 0.4 A 0.4 5.5 A 5.5 0.5 A 0.5 6.0 0.6 A 0.6 6.5 A 0.7 A 0.7 7.0 A 7 0.8 A 0.8 7.5 A 7.5 0.9 A 0.9 8.0 A 8 1 8.5 A 8.5 1.1 A 1.1 9.0 A 9 1.2 A 1.2 9.5 A 9.5 1.3 A 1.3 10.0 A 10 1.4 A 1.4 11.0 A 11 1.5 A 1.5 12.0 A 12 1.6 A 1.6 13.0 A 13 1.7 A 1.7 14.0 A 14 1.8 A 1.8 15.0 A 15 1.9 A 1.9 16.0 A 16 2.0 A 2 T11|-|1|2|3|A|B|-| 1.23 | = Rated current Rated current 0.05 A 1.0 6 6.5 Other rated currents on request Other rated currents on request Variants Rated current Construction variants Config. Code Order Number 1.0 T11-211-1 4400.0008 █ 3.0 A T11-211-3 4400.0010 █ 0.8 A T11-211-0.8 4400.0042 █ 12.0 A T11-211-12 4400.0052 █ 1.5 A T11-211-1.5 4400.0056 █ Shunt terminal Setting indication █ Most Popular. Availability for all products can be searched real-time:https://www.schurter.com/en/Stock-Check/ Stock-Check-SCHURTER Packaging Unit   6 100 Pcs  Circuit Breakers T11-211 Thermal (T- and TA-Line) https://www.schurter.com /PG17_20 Accessories Description T-Line Accessories Accessories to T-Line 14.06.2022   The specifications, descriptions and illustrations indicated in this document are based on current information. All content is subject to modifications and amendments. Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability and test each product selected for their own applications. Circuit Breakers 7