4404.001

T9-611 Thermal (T- and TA-Line) https://www.schurter.com /PG17_18_19 Circuit Breaker for Equipment thermal, Snap-in type, Fuseholder style, 1 pole See below: Approvals and Compliances Description Applications - Snap-in type from front side (0.8...2.0mm) - Thermal circuit breaker - 1‑pole - On request available with elevaled glow-wire ratings - Quick connect terminals 6.3 x 0.8 mm - Power supplies - Uninterruptible power supply - Power tools - Industrial appliances - HVAC - Household appliances Unique Selling Proposition Weblinks - Reset type - Cycling trip-free release - Compact design - Different mounting possibilities pdf data sheet, html datasheet, General Product Information, DistributorStock-Check, Detailed request for product, Product News Technical Data   Rated Voltage AC Rated Voltage DC Rated current Conditional short circuit capacity Inc 240 VAC  48/32 VDC  3-16 A, see approbations  IEC 60934: PC1, AC 240 V: 2 kA  Allowable Operation Temp. Weight 3 A: -5 °C to 60 °C  4 A: -5°C to 50 °C  5-16 A: -5 °C to 60 °C  9 - 13 g  UL / CSA: SC, AC 240 V DC 48 / 32 V: 2 kA, C1  Degree of protection front side IP40  Endurance minimum IEC: 200% Ir, cos φ 0.6: min. 50 switching cycles  Endurance typical 3-8 A: 150% Ir, cos φ 0.9: 2500 switching cycles ␣ 10-16 A: 150% Ir, cos φ 0.9: 6000 switching cycles Dielectric Strength 1500 VAC Insulation Resistance 500 VDC > 1000 MΩ  Approvals and Compliances Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in  Details about Approvals SCHURTER products are designed for use in industrial environments. They have approvals from independent testing bodies according to national and international standards. Products with specific characteristics and requirements such as required in the automotive sector according to IATF 16949, medical technology according to ISO 13485 or in the aerospace industry can be offered exclusively with customer-specific, individual agreements by SCHURTER. Approvals The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products. Approval Reference Type: T9 Approval Logo Certificates Certification Body Description VDE Approvals VDE VDE Certificate Number: 40038016 UL Approvals UL UR File Number: E71572 CCC Approvals CCC CCC Certificate Number: 2020970307003348 Circuit Breakers 1 T9-611 Thermal (T- and TA-Line) https://www.schurter.com /PG17_18_19 Product standards Product standards that are referenced Organization Design Standard Description Designed according to IEC 60934 Circuit-breakers for equipment (CBE) Designed according to UL 1077 Standard for Supplementary Protectors for Use in Electrical Equipment Designed according to CSA C22.2 No. 235 Supplementary Protectors Designed according to GB 17701 Circuit-breaker for equipment Design Standard Description Suitable for applications acc. IEC/UL 62368-1 Audio/video, information and communication technology equipment - Part 1: Safety requirements Details Initiator Description CE declaration of conformity SCHURTER AG The CE marking declares that the product complies with the applicable requirements laid down in the harmonisation of Community legislation on its affixing in accordance with EU Regulation 765/2008. UKCA declaration of conformity SCHURTER AG The UKCA marking declares that the product complies with the applicable requirements laid down in the British Amendment of Regulation (EC) 765/2008. RoHS SCHURTER AG Directive RoHS 2011/65/EU, Amendment (EU) 2015/863 China RoHS SCHURTER AG The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March 2007. It is similar to the EU directive RoHS. REACH SCHURTER AG On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration, Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as "REACH") entered into force. Application standards Application standards where the product can be used Organization Compliances The product complies with following Guide Lines Identification Dimension [mm] ​T9-611   34 ±0.5 10 ±0.3 14 +0.15 0 ø16 +0.15 0 19 ±0.2 6.3x0.8mm ø16 5 +0.15 0 10A 13.6 ±0.3 ø16 8 ±0.3 ø15.4 ±0.3 3.4 ±0.3 Pannel thickness s = 0.8 - 2.0 mm Approval 2 Rated current Rated Voltage AC Rated Voltage DC UL 1077 3 - 12 A 14 - 16 A 240 V 240 V 48 V 32 V CSA 22.2 235 3 - 12 A 14 - 16 A 240 V 240 V 48 V 32 V IEC 60934 3 - 12 A 14 - 16 A 240 V 240 V 48 V 32 V GB 17701 3 - 12 A 14 - 16 A 240 V 240 V 48 V 32 V Circuit Breakers +0.15 0 T9-611 Thermal (T- and TA-Line) https://www.schurter.com /PG17_18_19 Typical internal resistance per pole Rated Current [A] Internal Resistance [mΩ] 3 65.0 4 21.6 5 23.6 6 16.3 7 15.3 8 12.9 10 7.3 12 7.0 14 4.8 15 4.3 16 3.9 Time-Current-Curves [min] [min] [sec] 10'000 [sec] 10'000 T9 T9 5 A -16 A (TC-1) 60 4A 30 20 10 10 5 5 3 1'000 3 Time in Seconds 100 1 10 1 10 1.35 1.45 1 1.05 0.1 1 100 1 2 3 4 5 6 7 8 10 0.1 1 1.5 Time in Seconds (TC-2) 30 1'000 1.05 20 3 A 60 (TC-2) Multiple of Rated Current In Multiple of Rated Current In Ambient temperature +23° Ambient temperature +23° 2 3 4 5 6 7 8 10 Effect of ambient temperature The units are calibrated for an ambient temperature of +23°C. To determine the rated current for a lower or higher ambient temperature, use a correction factor (typical value) from the table below: Ambient Temperature [°C] Correction factor -5 0,85 +10 0,95 +23 1,00 +40 1,08 +60 1,21 Example: Rated current = 10 A, Environmental temperature = 60 °C, --> Correction factor = 1.21, Resulting current = 12.1 A --> Round to next higher rated current: 13 A Circuit Breakers 3 T9-611 Thermal (T- and TA-Line) https://www.schurter.com /PG17_18_19 Variants Mounting Front printing Rated current Order Number Snap-in mounting from front side Rated current printed on front 3.0 A 4404.0018 █ Snap-in mounting from front side Rated current printed on front 4.0 A 4404.0001 █ Snap-in mounting from front side Rated current printed on front 5.0 A 4404.0007 █ Snap-in mounting from front side Rated current printed on front 6.0 4404.0002 █ Snap-in mounting from front side Rated current printed on front 7.0 A 4404.0009 █ Snap-in mounting from front side Rated current printed on front 8.0 A 4404.0003 █ Snap-in mounting from front side Rated current printed on front 10.0 A 4404.0004 █ Snap-in mounting from front side Rated current printed on front 12.0 A 4404.0005 █ Snap-in mounting from front side Rated current printed on front 14.0 A 4404.0008 █ Snap-in mounting from front side Rated current printed on front 15.0 A 4404.0010 █ Snap-in mounting from front side Rated current printed on front 16.0 A 4404.0006 █ Snap-in mounting from front side Rated current printed on front 90° shifted 4.0 A 4404.0066 █ Snap-in mounting from front side Rated current printed on front 90° shifted 8.0 A 4404.0069 Snap-in mounting from front side Rated current printed on front 90° shifted 10.0 A 4404.0059 Snap-in mounting from front side Rated current printed on front 90° shifted 12.0 A 4404.0061 Snap-in mounting from front side Rated current printed on front 90° shifted 16.0 A 4404.0062 Snap-in mounting from front side Rated current not printed on front 3.0 A 4404.0088 Snap-in mounting from front side Rated current not printed on front 4.0 A 4404.0089 Snap-in mounting from front side Rated current not printed on front 5.0 A 4404.0090 Snap-in mounting from front side Rated current not printed on front 6.0 4404.0091 Snap-in mounting from front side Rated current not printed on front 7.0 A 4404.0065 Snap-in mounting from front side Rated current not printed on front 8.0 A 4404.0092 Snap-in mounting from front side Rated current not printed on front 10.0 A 4404.0093 Snap-in mounting from front side Rated current not printed on front 12.0 A 4404.0063 Snap-in mounting from front side Rated current not printed on front 14.0 A 4404.0094 Snap-in mounting from front side Rated current not printed on front 15.0 A 4404.0095 Snap-in mounting from front side Rated current not printed on front 16.0 A 4404.0087 █ █ Most Popular. Availability for all products can be searched real-time:https://www.schurter.com/en/Stock-Check/Stock-Check-SCHURTER 100 Pcs  08.06.2022 Packaging Unit   4 Circuit Breakers The specifications, descriptions and illustrations indicated in this document are based on current information. All content is subject to modifications and amendments. Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability and test each product selected for their own applications.