4404.0097

T9-818 Thermal (T- and TA-Line) www.schurter.com /PG17_18_19 Circuit Breaker for Equipment thermal, THT terminals for PCB mounting horizontal, 1 pole Description - Thermal circuit breaker - 1-pole - On request available with elevaled glow-wire ratings - THT connectors Unique Selling Proposition - Reset type - Cycling trip-free release - Compact design - Different mounting possibilities - Designed for standard and medical applications - Power supplies - Uninterruptible power supply - Power tools - Industrial appliances - HVAC - Household appliances Weblinks pdf datasheet, html-datasheet, General Product Information, Approvals, CE declaration of conformity, RoHS, CHINA-RoHS, REACH, DistributorStock-Check, Detailed request for product, Product News, Video Standards - Approval Reference Type: T9 -  IEC 60934 -  UL 1077 -  CSA C22.2 No. 235 -  GB 17701 Technical Data Rated Voltage AC Rated Voltage DC Rated current Conditional short circuit capacity ␣ Applications   240 V, 50 / 60 Hz  48 / 32 V, see approvals  3-15 A, see approbations  IEC: Inc, PC1, AC 240 V: 2 kA  UL / CSA: SC, AC 240 V DC 48 / 32 V: 2 kA, C1  Degree of protection front side IP 40  Endurance minimum IEC: 200% Ir, cos φ 0.6: min. 50 switching cycles  Endurance typical 3-8 A: 150% Ir, cos φ 0.9: 2500 switching cycles ␣ 10-15 A: 150% Ir, cos φ 0.9: 6000 switching cycles Dielectric Strength 1500 VAC Insulation resistance 500 VDC > 1000 MΩ  Ambient temperature ␣ ␣ Soldering Methods Solderability Resistance to Soldering Heat Weight 3 A: -5 °C to 60 °C  4 A: -5°C to 50 °C  5-15 A: -5 °C to 60 °C  Wave 245 °C / 3 sec acc. to IEC 60068-220 / Test Ta, method 1 260 °C / 10 sec acc. to IEC 60068-220 / Test Tb, method 1A approx. 12.5 g  Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in   General Product Information Circuit Breakers 1 T9-818 Thermal (T- and TA-Line) www.schurter.com /PG17_18_19 Dimension   4.1 8.35 4.65 45.85 4.65 ø 2.6 8.35 45.85 3.35 19 Drilling diagram Assembly Instructions 3) 1) 2) 1) Front panel 2) PCB 3) T9-818 Approval Rated current Rated voltage AC Rated voltage DC UL 1077 3 - 12 A 14 - 15 A 240 V 240 V 48 V 32 V CSA 22.2 235 3 - 12 A 14 - 15 A 240 V 240 V 48 V 32 V IEC 60934 3 - 12 A 14 - 15 A 240 V 240 V 48 V 32 V GB 17701 3 - 12 A 14 - 15 A 240 V 240 V 48 V 32 V Typical internal resistance Rated Current [A] Internal Resistance [mΩ] 3 80.0 4 26.3 5 24.1 2 6 19.0 7 18.0 8 14.8 10 13.0 12 12.7 14 9.7 15 8.0 Circuit Breakers ø 2 ± 0.05 ø 2.6 ø 2 ± 0.05 1.25 3.35 47.3 ø 7.8 7.8 ø 9.5 5 10 T9-818 Thermal (T- and TA-Line) www.schurter.com /PG17_18_19 Time-Current-Curves [min] [min] [sec] 10'000 [sec] 10'000 T9 T9 5 A -16 A (TC-1) 60 4A (TC-2) 30 20 1'000 10 10 5 5 3 1'000 3 Time in Seconds 100 1 10 100 1 10 1 1.35 1.45 1.05 0.1 1 1 2 3 4 5 6 7 8 0.1 1 10 1.5 Time in Seconds (TC-2) 30 1.05 20 3 A 60 2 Multiple of Rated Current In Multiple of Rated Current In Reference Temperature +23° Reference Temperature +23° 3 4 5 6 7 8 10 Effect of ambient temperature The units are calibrated for an ambient temperature of +23°C. To determine the rated current for a lower or higher ambient temperature, use a correction factor (typical value) from the table below: Ambient temperature [°C] Correction factor -5 0,85 +10 0,95 +23 1,00 +40 1,08 +60 1,21 Example: Rated current = 10 A; Environmental temperature = 60 °C; --> Correction factor = 1.21; Resulting current = 12.1 A --> Fount to next higher rated current: 13 A Variants connection type Rated current Order Number Solder, THT 3A 4404.0096 █ Solder, THT 4A 4404.0097 █ Solder, THT 5A 4404.0098 █ Solder, THT 6A 4404.0099 █ Solder, THT 7A 4404.0100 █ Solder, THT 8A 4404.0101 █ Solder, THT 10A 4404.0102 █ Solder, THT 12A 4404.0103 █ Solder, THT 14A 4404.0104 █ Solder, THT 15A 4404.0105 █ █ Most Popular. Packaging Unit   09.05.2017 Availability for all products can be searched real-time:http://www.schurter.com/en/StockCheck/Stock-Check-SCHURTER 100 Pcs  The specifications, descriptions and illustrations indicated in this document are based on current information. All content is subject to modifications and amendments. Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability and test each product selected for their own applications. Circuit Breakers 3