4420.0324

AS168XDC1 Thermal-magnetic (TM and AS-line) https://www.schurter.com /PG20 OU T Circuit Breaker for Equipment thermal-magnetic, 1 pole See below: Approvals and Compliances Description - Thermal-magnetic circuit breaker - High short circuit performance - Availability of AC and DC in the same frame size - DIN-Rail Mounting Applications - Industrial appliances References Last order possibility: 31.08.2018 Last delivery date: 30.09.2018 Weblinks pdf datasheet, html-datasheet, General Product Information, DistributorStock-Check, Detailed request for product, Product News General data Rated Voltage DC   E- Technical Data AS IEC 180 V   UL/CSA 120/180 V Rated current 0.5 - 50 A , see approbations Conditional short circuit capa- Icn: DC 180 V: 4.5 kA (no fuse)  city IEC 60934 Conditional short circuit capa- Icn: DC 120 V; DF/DG: 0.5A-40A: 10 kA city UL 1077 (no fuse)   Icn: DC 120 V; DH: 0.5A-40A: 5 kA (no fuse)   Icn: DC 180 V; 0.5A-50A: 2 kA (no fuse)  Degree of Protection from front side IP 40 acc. to IEC 60529 Lifetime 1 x Ir 6000 switching cycles Dielectric Strength 50 Hz: > 2 kV Impulse 1.2/50 μs Vibration Resistance ± 0.75 mm @ 5 - 60 Hz acc. to IEC 60068-2-6, test Fc 10 G @ 60 - 500 Hz acc. to IEC 60068-2-6, test Fc Insulation Resistance 250/440 VAC > 5 MΩ Shock Resistance 30 G / 18 ms acc. to IEC 60068-2-27, test Ea Ambient temperature -10 °C to 55 °C Weight 100 - 130 g Tripping Type Actuation Type Permissible wire cross section Switched neutral Rated Voltage Rated current Function Add-on modules Add-on modules  Positively trip free Manual ON/OFF  1.5 - 25 mm² / 16 - 4 AWG  AC 277 V AC/DC 65 A The switched neutral closes with manual closure of the poles and opens automatically with thermal magnetic tripping of the poles.  Technical data for the additional module see separate data sheet  PH Approvals and Compliances Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in   Details about Approvals Circuit Breakers 1 AS168XDC1 Thermal-magnetic (TM and AS-line) https://www.schurter.com /PG20 Approvals The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products. Approval Reference Type: AS168X Certification Body Description VDE Approvals VDE VDE Certificate Number: 40005743 UL Approvals UL UL File Number: E216629 / E71572 UL Approvals UL UL File Number: E216629 / E71572 CQC Approvals CQC CCC Certificate Number: 2013010307594187 Product standards Product standards that are referenced Organization Design Standard Designed according to IEC 60934 Designed according to UL 1077 Designed according to CSA C22.2 Application standards Application standards where the product can be used Design Standard Designed for applications acc. Standard for Supplementary Protectors for Use in Electrical Equipment Supplementary Protectors Description IEC 60950-1 includes the basic requirements for the safety of information technologyequipment. Initiator Description SCHURTER AG The CE marking declares that the product complies with the applicable requirements laid down in the harmonisation of Community legislation on its affixing in accordance with EU Regulation 765/2008. SCHURTER AG EU Directive RoHS 2011/65/EU China RoHS SCHURTER AG The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March 2007. It is similar to the EU directive RoHS. REACH SCHURTER AG On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration, Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as "REACH") entered into force. The product complies with following Guide Lines Details CE declaration of conformity PH AS RoHS 2 Circuit-breakers for equipment (CBE) IEC/UL 60950 Compliances Identification Description E- Organization T Certificates OU Approval Logo Circuit Breakers AS168XDC1 Thermal-magnetic (TM and AS-line) https://www.schurter.com /PG20 Dimension [mm] AS168X 1 pole 35 A) 1.9 90 B) T 5.1 26.6 44.4 OU 68.4 61.6 45 17.5 A) 35 mm DIN rail EN 50022 B) Max. torque AS168X 1 pole and switched neutral pole Max. torque 2.5 Nm 3.1 Nm 20 ... 22 lb –in 26 ... 28 lb –in E- Wire crosssection 1.5 ... 10 mm2 16 ... 25 mm2 AWG #16 ... 8 AWG #6 ... 4 68.4 A) 5.1 35 26.6 44.4 61.6 AS 45 35 PH 1.9 90 B) A) 35 mm DIN rail EN 50022 B) Max. torque Wire crosssection 1.5 ... 10 mm2 16 ... 25 mm2 AWG #16 ... 8 AWG #6 ... 4 Circuit Breakers Max. torque 2.5 Nm 3.1 Nm 20 ... 22 lb –in 26 ... 28 lb –in 3 AS168XDC1 Thermal-magnetic (TM and AS-line) https://www.schurter.com /PG20 Diagrams AS168X-CB1...N OU T AS168X-CB1... AS168X-CB1... / AS168X-ACBS2 AS AS168X-CB1... / AS168X-ACBS1 AS168X-CB1... / AS168X-ACBH2 E- AS168X-CB1... / AS168X-ACBH1 PH AS168X-CB1... / AS168X-ACBA 4 Circuit Breakers AS168XDC1 Thermal-magnetic (TM and AS-line) https://www.schurter.com /PG20 Rated current Rated voltage DC Conditional short circuit capacity Icn UL 508 CSA C22.2 no. 14 - - - UL 1077 0.5 - 40 A 120 V 10 kA CSA C22.2 no. 235 0.5 - 50 A 180 V 2 kA EN 60934 0.5 - 50 A 180 V 4.5 kV GB 17701 nur Art.-Nr. 4420.0386 (30 A) 4420.0526 (40 A) 4420.0897 (50 A) 120 V T Standard 3 kA OU Symbol Effect of ambient temperature AC-breaker are calibrated for an ambient temperature of +40°C, DC-breakers for +23°C. To determine the rated current for a lower or higher ambient temperature, use a correction factor from the table below: Ambient temperature [°C] Correction factor AC version Correction factor DC version -20 0.78 0.80 -5 0.82 0 0.83 +10 0.87 +23 0.91 +30 0.95 +40 1.00 +50 1.05 +60 1.11 0.87 0.90 0.95 1.00 1.05 1.10 1.20 E- 1.30 Example DC version: Rated current = 10 A; Environmental temperature = 50 °C; --> Correction factor = 1.2; Resulting current = 12 A Time-Current-Curves Version DF / Magnetic 4.5-8 xln Version DG / Magnetic 9-16 xln AS 1hr 1000s 100s 100s 10s 10s Time in Seconds 1000s 1s 0,1s 10ms PH Time in Seconds 1hr 1ms 10 100 0,1s 10ms 1ms 0,1ms 1 1s 0,1ms 1000 x In 1 10 Multiple of Rated Current In Multiple of Rated Current In Reference Temperature +23° Reference Temperature +23° Circuit Breakers 100 1000 x In 5 AS168XDC1 Thermal-magnetic (TM and AS-line) https://www.schurter.com /PG20 Version DH / Magnetic 18-32 xln T 1hr 1000s 100s 1s 0,1s 10ms 1ms 0,1ms 1 10 100 1000 x In Multiple of Rated Current In Config. Code AS168X-CB|1|DG|200|N| E- Reference Temperature +23° OU Time in Seconds 10s  The characters are placeholders for the correspondingly keys of selections from the key tables. AS168X-CB| 1 |DG|200|N| = Number of Poles Configuration key Configuration key 080 9.0 A 090 10.0 A 100 12.0 A 120 15.0 A 150 16.0 A 160 18.0 A 180 20.0 A 200 23.0 A 230 25.0 A 250 27.0 A 270 AS168X-CB|1|DG| 200 |N| = Rated current 30.0 A 300 32.0 A 320 Configuration key 35.0 A 350 40.0 A 400 0.05 A 005 45.0 A 450 1.0 A 010 50.0 A 500 1.5 A 015 Other rated currents on request 2.0 A 020 3.0 A 030 4.0 A 040 5.0 A 050 6.0 A 060 7.0 A 070 AS 8.0 A PH Number of Poles Rated current 1-pole 1 AS168X-CB|1| DG |200|N| = Tripping characteristics Tripping characteristics Configuration key 1.05-1.35xIn / 4.5-8xIn / 0.5-50 A DF 1.05-1.35xIn / 9-16xIn / 0.5-50 A DG 1.05-1.35xIn / 18-32xIn / 6.0-50 A DH Rated current Other rated currents on request 6 Circuit Breakers AS168X-CB|1|DG|200| N | = Switched neutral Switched neutral Switched neutral pole Configuration key N AS168XDC1 Thermal-magnetic (TM and AS-line) https://www.schurter.com /PG20 Variants Rated current Switched neutral Config. Code Order Number 1.05-1.35xIn / 9-16xIn / 0.5-50 A 0.05 A   AS168X-CB1DG005 4420.0460 1.05-1.35xIn / 9-16xIn / 0.5-50 A 1.0 A   AS168X-CB1DG010 4420.0625 T Tripping characteristics 5.0 A   AS168X-CB1DG050 4420.0354 10.0 A   AS168X-CB1DG100 4420.0324 1.05-1.35xIn / 9-16xIn / 0.5-50 A 20.0 A   1.05-1.35xIn / 9-16xIn / 0.5-50 A 20.0 A 1.05-1.35xIn / 9-16xIn / 0.5-50 A 40.0 A OU 1.05-1.35xIn / 9-16xIn / 0.5-50 A 1.05-1.35xIn / 9-16xIn / 0.5-50 A AS168X-CB1DG200 4420.0332 Switched neutral pole AS168X-CB1DG200N 4420.0823   AS168X-CB1DG400 4420.0530 Availability for all products can be searched real-time:https://www.schurter.com/en/Stock-Check/Stock-Check-SCHURTER 1 Pcs  The specifications, descriptions and illustrations indicated in this document are based on current information. All content is subject to modifications and amendments. Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability and test each product selected for their own applications. 19.02.2018 PH AS E- Packaging Unit   Circuit Breakers 7