4710
Connectors (Inlets/Outlets)
https://www.schurter.com /PG07
IEC Appliance Outlet J, Snap-in Mounting, Front Side, IDC Terminal
4710
cross
With integrated Light Pipes
4710 with integrated Light Pipes
4710
cross, view from rear side
Snap-in mounting from front side
Arrangement "cross", view from rear side
(wires cross to pin axis)
4710
cross
Snap-in mounting from front side
Arrangement "cross"
(wires cross to pin axis)
type J
See below:
Approvals and Compliances
70° C
Description
- Panel mount :
Snap-in version , front side
- Connector , Pin temperature 70 °C , Protection class I
- Wire gauge 10AWG/6.0mm², 12AWG/4.0mm², 2.5mm²
- IDC terminals acc. to IEC 60998-2-3 for solid wires
Characteristics
- Protection cover can be used as wire press
- Live contact available as IDC, solder or quick connect terminal
- ready to use with V-Lock cordsets
- Suitable for use in equipment according to IEC/UL 62368-1
Other versions on request
- Other panel thickness
Unique Selling Proposition
- Reduces labor costs
- Allows wiring of multiple terminals at once
- Cross and along orientation
- V-Lock cord retaining standard
References
Alternative: version for 10 A (15 A) 4710-5; 6610
Weblinks
pdf data sheet, html datasheet, General Product Information, Approvals,
Distributor-Stock-Check, Accessories, Mounting instruction, Detailed
request for product, Video
The integration of light pipes in the appliance outlet provides status indication in smart PDUs. See PDU Landing Page for more information.
Power Distribution Units
Technical Data
Ratings IEC
Ratings UL/CSA
Dielectric Strength
Allowable Operation Temperature
Protection against electric
shock
Terminal
Panel Thickness S
Material: Housing
16 A / 250 VAC; 50 Hz
20 A / 250 VAC; 60 Hz
> 2.5 kVAC between L-N
> 1.5 kVAC between L/N-PE
(1 min/50 Hz)
-25 °C to 70 °C
Appliance inlet/-outlet
type J acc. to IEC 60320-3
UL 60320-1, CSA C22.2 no. 60320-1 ,
Protection Class I
Suitable for appliances with protection
class I acc. to IEC 61140
IDC terminals
1/1.2/1.5/2/2.5/3 mm
Thermoplastic, black, UL 94V-0
Approvals and Compliances
Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about
Approvals
SCHURTER products are designed for use in industrial environments. They have approvals from independent testing bodies according to national
and international standards. Products with specific characteristics and requirements such as required in the automotive sector according to IATF
16949, medical technology according to ISO 13485 or in the aerospace industry can be offered exclusively with customer-specific, individual agreements by SCHURTER.
Connectors
1
4710
Connectors (Inlets/Outlets)
https://www.schurter.com /PG07
Approvals
The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products.
Approval Reference Type: 4710
Approval Logo
Certificates
Certification Body
Description
VDE Approvals
VDE
Certificate Number: 40042639
UL Approvals
UL
UR File Number: E103791
CCC Approvals
CCC
CCC Certificate Number: 2014010204668919
Design
Standard
Description
Designed according to
IEC 60320-1
Appliance couplers for household and similar general purposes
Designed according to
IEC 60320-3
Appliance couplers for household and similar general purposes
Designed according to
UL 60320-1
Standard for Attachment Plugs and Receptacles
Designed according to
CSA C22.2 no. 60320-1
General Use Receptacles, Attachment Plugs, and Similar Wiring Devices
Design
Standard
Description
Suitable for applications acc.
IEC/UL 62368-1
Audio/video, information and communication technology equipment - Part
1: Safety requirements
Details
Initiator
Description
CE declaration of conformity
SCHURTER AG
The CE marking declares that the product complies with the applicable
requirements laid down in the harmonisation of Community legislation on
its affixing in accordance with EU Regulation 765/2008.
UKCA declaration of conformity
SCHURTER AG
The UKCA marking declares that the product complies with the applicable
requirements laid down in the British Amendment of Regulation (EC)
765/2008.
RoHS
SCHURTER AG
Directive RoHS 2011/65/EU, Amendment (EU) 2015/863
China RoHS
SCHURTER AG
The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March
2007. It is similar to the EU directive RoHS.
Halogen Free
SCHURTER AG
SCHURTER strives to offer our customers halogen free products.
REACH
SCHURTER AG
On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration,
Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as
"REACH") entered into force.
SCHURTER AG
V-Lock system are based on a matching plug-dose combination. The
connector is equipped with a notch intended for use with the latching
cordset. The cord latching system prevents against accidental removal of
the cordset.
Product standards
Product standards that are referenced
Organization
Application standards
Application standards where the product can be used
Organization
Compliances
The product complies with following Guide Lines
Identification
2
Connectors
4710
Connectors (Inlets/Outlets)
https://www.schurter.com /PG07
Dimensions [mm]
Version "cross" (wires cross to pin axis)
L/N/PE: IDC terminals
37
34.7
3
R
+0.2
0
37.6
+0.2
0
29.5 +0.2
0
ax
.R
5
29
34
5
1.
37.6
m
42
S ±0.1
Version "along" (wires along to pin axis)
L/N/PE: IDC terminals
37
34.7
3
R
1.
29.5 +0.2
0
ax
.R
5
29
34
5
m
42
S ±0.1
Connectors
3
4710
Connectors (Inlets/Outlets)
https://www.schurter.com /PG07
Version "cross" (wires cross to pin axis)
N/PE: IDC terminals, L: quick connect or solder terminal
R
34.7
3
+0.2
0
37.6
+0.2
0
ax
.R
5
34
29.5 +0.2
0
5
1.
37.6
m
E
42
R
5.
5
29
37
E: Quick connect terminal 6.3x0.8: 46.7 mm
E: Solder terminal:
47.2 mm
Version "along" (wires along to pin axis)
N/PE: IDC terminals, L: quick connect or solder terminal
R
34.7
3
R
5.
5
29
37
E: Quick connect terminal 6.3x0.8: 46.7 mm
E: Solder terminal:
47.2 mm
4
Connectors
m
ax
.
R
5
34
29.5 +0.2
0
5
1.
E
42
4710
Connectors (Inlets/Outlets)
https://www.schurter.com /PG07
Assembly Instructions
Wire press version "cross"
2.8
Wire press version "along"
17.9
26
6.6 6.6
0.5
min. 4
0.4
ø 4.5
ø 7.5
21.3
2.8 ±0.1
3.2 ±0.1
37
2.8
6.15 ±0.1
2
26
ø 7.5
17.9
ø 4.5
6.15 ±0.1
2
10.2 ±0.1
min. 4
6 ±0.1
min. 8.2
3
15
(15)
min. 8.2
6 ±0.10
(15)
21.3
+0.10
0
2.85
15
2.85 +0.1
0
+0.10
0
4.3
7.5
4.3 +0.10
0
15
All Variants
Alignment 1)
Conductor cross section
Panel Thickness
s [mm]
Terminal type live contact
Order Number
along
2.5 mm²
along
2.5 mm²
1.5
IDC terminal
4710.6014
1.5
Quick connect terminal 6.3 x 0.8 mm
4710.6254
along
2.5 mm²
1.5
Solder terminal
4710.6154
along
4.0 mm² / 12 AWG
along
4.0 mm² / 12 AWG
1
IDC terminal
4710.4012
1.5
IDC terminal
along
4.0 mm² / 12 AWG
4710.4014
1.5
Quick connect terminal 6.3 x 0.8 mm
along
4710.4254
4.0 mm² / 12 AWG
1.5
Solder terminal
4710.4154
along
6.0 mm² / 10 AWG
1.5
IDC terminal
4710.2014
along
6.0 mm² / 10 AWG
1.5
Quick connect terminal 6.3 x 0.8 mm
4710.2254
along
6.0 mm² / 10 AWG
1.5
Solder terminal
4710.2154
cross
2.5 mm²
1.5
IDC terminal
4710.5014
█
cross
2.5 mm²
1.5
Quick connect terminal 6.3 x 0.8 mm
4710.5254
█
cross
2.5 mm²
1.5
Solder terminal
4710.5154
cross
4.0 mm² / 12 AWG
1.5
IDC terminal
4710.3014
cross
4.0 mm² / 12 AWG
2
IDC terminal
4710.3015
cross
4.0 mm² / 12 AWG
1.5
Quick connect terminal 6.3 x 0.8 mm
4710.3254
cross
4.0 mm² / 12 AWG
1.5
Solder terminal
4710.3154
cross
6.0 mm² / 10 AWG
1.5
IDC terminal
4710.1014
cross
6.0 mm² / 10 AWG
1.5
Quick connect terminal 6.3 x 0.8 mm
4710.1254
cross
6.0 mm² / 10 AWG
1.5
solder terminal
4710.1154
█
█ Most Popular.
Availability for all products can be searched real-time:https://www.schurter.com/en/Stock-Check/Stock-Check-SCHURTER
Articles with 2.5 mm² only with ENEC approval. Outer diameter of wire (including insulation) max. 4.5 mm.
1) The alignment describes whether the wires are along or across to the connector pin axis.
Packaging unit
50 Pcs
Connectors
5
4710
Connectors (Inlets/Outlets)
https://www.schurter.com /PG07
Mating Inlets/Plugs
Category / Description
Plug Overview complete
4796, Mounting: Power Cord, Cable, Plug: IEC I
4796
4789, Mounting: Power Cord, Screw, Plug: IEC I
4789
Mating Inlets/Plugs shuttered
Interconnection Cord Overview complete
VAC19KS, Interconnection, V-Lock cord retaining, 2.0 m, Connector IEC C19, H05VV-F3G1.5 / SJT 3x14 AWG, black
3-100-362
VAC19KS, Interconnection, V-Lock cord retaining, 3.0 m, Connector IEC C19, H05VV-F3G1.5 / SJT 3x14 AWG, black
3-100-363
VAC19KS, Interconnection, V-Lock cord retaining, 1.0 m, Connector IEC C19, H05VV-F3G1.5, black
6051.2147
VAC19KS, Interconnection, V-Lock cord retaining, 1.0 m, Connector IEC C19, H05VV-F3G1.5 / SJT 3x14 AWG, black
6051.2197
15.08.2023
6
Connectors
The specifications, descriptions and illustrations indicated in this document are based on current
information. All content is subject to modifications and amendments. Information furnished is believed
to be accurate and reliable. However, users should independently evaluate the suitability and test each
product selected for their own applications.
