4754

Distribution Units www.schurter.com/pg07_ Strip Block for Snap-in Mounting with 4 IEC Appliance Outlets F and space for extra component 4754 Snap-In Version F 70° C Description - Panel Mount: Snap-in version from front side - 3 Functions: Module of 4 outlets, with additional carrier frame for accessory modules, Pin temperature 70 °C, Protection class I - Solder terminals or quick connect terminals Characteristics - Insulation cover on the rear-side - Qualified for use in equipment according IEC/EN 60950 Other versions on request - For protection class II References Weblinks Approvals General Product Information Approvals, RoHS, CHINA-RoHS, Mating Connectors, e-Store, SCHURTER-Stock-Check, Distributor-Stock-Check - CSA License Number: 56242 Technical Data Ratings IEC Ratings UL/CSA Dielectric Strength 10 A / 250 VAC; 50 Hz 15 A / 250 VAC; 60 Hz > 2 kVAC between L-N > 2 kVAC between L/N-PE (1 min/50 Hz) -25 °C to 70 °C from front side IP 30 acc. to IEC 60529 Suitable for appliances with protection class 1 acc. to IEC 61140 Solder terminals or quick connect terminals Snap-in 1/ 1.2/ 1.5/ 2/ 2.5/ 3 mm tolerance +0.0/-0.1 Thermoplastic, black, UL 94V-0 Appliance Outlet F acc. to IEC/EN 60320-2-2, UL 498 CSA C22.2 no. 42 (for cold conditions) pin-temperature 70 °C, 10 A, Protection Class 1 Allowable Operation Temp. Degree of Protection Protection Class Terminal Panel Thickness s Material: Housing Connectors  4754 www.schurter.com/pg07_ Dimensions Cut-out for 2 mm Snap-in Inlet Distribution Units Panel cut-out 122.1 x 32.5 mm Max. corner radius 1 mm Variants Panel Thickness s [mm] 1 1.2 1.5 2 2.5 3 1 1.2 1.5 2 2.5 3 1 1.2 1.5 2 2.5 3 Terminal Quick connect terminals 6.3 x 0.8 mm Quick connect terminals 6.3 x 0.8 mm Quick connect terminals 6.3 x 0.8 mm Quick connect terminals 6.3 x 0.8 mm Quick connect terminals 6.3 x 0.8 mm Quick connect terminals 6.3 x 0.8 mm Solder terminals 4 x 0.8 mm Solder terminals 4 x 0.8 mm Solder terminals 4 x 0.8 mm Solder terminals 4 x 0.8 mm Solder terminals 4 x 0.8 mm Solder terminals 4 x 0.8 mm Solder terminals 4 x 0.8 mm and quick connect terminals 6.3 x 0.8 mm Solder terminals 4 x 0.8 mm and quick connect terminals 6.3 x 0.8 mm Solder terminals 4 x 0.8 mm and quick connect terminals 6.3 x 0.8 mm Solder terminals 4 x 0.8 mm and quick connect terminals 6.3 x 0.8 mm Solder terminals 4 x 0.8 mm and quick connect terminals 6.3 x 0.8 mm Solder terminals 4 x 0.8 mm and quick connect terminals 6.3 x 0.8 mm Distributor-Stock-Check | SCHURTER-Stock-Check | e-Store Length [mm] 126 126 126 126 126 126 126 126 126 126 126 126 126 126 126 126 126 126 Order Number 4754.3200 4754.8200 4754.4200 4754.5200 4754.6200 4754.7200 4754.3400 4754.8400 4754.4400 4754.5400 4754.6400 4754.7400 4754.3000 4754.8000 4754.4000 4754.5000 4754.6000 4754.7000 Please note, all quadblocs are available in protection-class II upon request. Cord retaining clamp see accessories Packaging unit 40 Pcs  Connectors Distribution Units www.schurter.com/pg07_ Accessories Description 4754 Cord retaining kits Cord retaining strain relief Flat head, Z Flat head, E Flat head, G Flat head, H 0888.0021 4700.0005 4700.0007 4700.0008 Mating Inlets/Plugs Category / Description Interconnection Cord Overview complete Interconnection Cord with IEC Plug E, Angled Interconnection Cord with IEC Plug E, Angled Interconnection Cord with IEC Plug E, Straight Interconnection Cord with IEC Plug G, Angled Interconnection Cord with IEC Plug G, Angled Interconnection Cord further types to 4754 Plug Overview complete IEC Plug E, Cord Connector (Rewireable), Straight, max. cable Diameter 8.5 mm IEC Plug E, Cord Connector (Rewireable), Angled, max. Cable Diameter 10 mm IEC Plug E, Cord Connector (Rewireable), Straight, max. Cable Diameter 10 mm IEC Plug E, Cord Connector (Rewireable), Angled, max. Cable Diameter 10 mm IEC Plug E, Cord Connector (Rewireable), Straight Plug further types to 4754 4732 4733 4735 4736 9009 ... 0607 0608 0609 607B 608B ... The specifications, descriptions and illustrations indicated in this document are based on Connectors current information. All content is subject to modifications and amendments.