4758

Distribution Units www.schurter.com/pg07_ Strip Block for Snap-in Mounting with 4 IEC Appliance Outlets F and Space for 2 Extra Components 4758 Snap-In Version F 70° C Description - Panel Mount: Snap-in version from front side - 4 Functions: Module of 4 outlets, with additional carrier frame for accessory modules, Pin temperature 70 °C, Protection class I - Solder terminals or quick connect terminals Characteristics - Busbar is of single piece (no soldering) - Insulation cover on the rear-side - Qualified for use in equipment according IEC/EN 60950 Other versions on request - For protection class II Approvals References Weblinks - VDE License Number: 40010521 - UL License Number: E96454 - CSA License Number: 56242 General Product Information Approvals, RoHS, CHINA-RoHS, Mating Connectors, e-Store, SCHURTER-Stock-Check, Distributor-Stock-Check Technical Data Ratings IEC Ratings UL/CSA Dielectric Strength 10 A / 250 VAC; 50 Hz 15 A / 250 VAC; 60 Hz > 2 kVAC between L-N > 2 kVAC between L/N-PE (1 min/50 Hz) -25 °C to 70 °C from front side IP 30 acc. to IEC 60529 Suitable for appliances with protection class 1 acc. to IEC 61140 Solder terminals or quick connect terminals Snap-in 1/ 1.2/ 1.5/ 2/ 2.5/ 3 mm tolerance +0.0/-0.1 Thermoplastic, black, UL 94V-0 Appliance Outlet F acc. to IEC/EN 60320-2-2, UL 498 CSA C22.2 no. 42 (for cold conditions) pin-temperature 70 °C, 10 A, Protection Class 1 Allowable Operation Temp. Degree of Protection Protection Class Terminal Panel Thickness s Material: Housing Connectors  4758 www.schurter.com/pg07_ Dimensions Quadbloc + Two 4758 Cut-out for 2 mm Snap-in Inlet Distribution Units Panel cut-out 134 x 32,5 mm, corner radius max. 5 mm With power entry module, type 6200 or type 6220 Variants Panel Thickness s [mm] 1 1.2 1.5 2 2.5 3 1 1.2 1.5 2 2.5 3 1 1.2 1.5 2 2.5 3 Terminal Quick connect terminals 6.3 x 0.8 mm Quick connect terminals 6.3 x 0.8 mm Quick connect terminals 6.3 x 0.8 mm Quick connect terminals 6.3 x 0.8 mm Quick connect terminals 6.3 x 0.8 mm Quick connect terminals 6.3 x 0.8 mm Solder terminals 4 x 0.8 mm Solder terminals 4 x 0.8 mm Solder terminals 4 x 0.8 mm Solder terminals 4 x 0.8 mm Solder terminals 4 x 0.8 mm Solder terminals 4 x 0.8 mm Solder terminals 4 x 0.8 mm and quick connect terminals 6.3 x 0.8 mm Solder terminals 4 x 0.8 mm and quick connect terminals 6.3 x 0.8 mm Solder terminals 4 x 0.8 mm and quick connect terminals 6.3 x 0.8 mm Solder terminals 4 x 0.8 mm and quick connect terminals 6.3 x 0.8 mm Solder terminals 4 x 0.8 mm and quick connect terminals 6.3 x 0.8 mm Solder terminals 4 x 0.8 mm and quick connect terminals 6.3 x 0.8 mm Distributor-Stock-Check | SCHURTER-Stock-Check | e-Store Length [mm] 138 138 138 138 138 138 138 138 138 138 138 138 138 138 138 138 138 138 Order Number 4758.3200 4758.8200 4758.4200 4758.5200 4758.6200 4758.7200 4758.3400 4758.8400 4758.4400 4758.5400 4758.6400 4758.7400 4758.3000 4758.8000 4758.4000 4758.5000 4758.6000 4758.7000 Please note, all quadblocs are available in protection-class II upon request. Cord retaining clamp see accessories Packaging unit 50 Pcs  Connectors Distribution Units www.schurter.com/pg07_ Required Accessory Description 4758 6200 IEC Appliance Inlet C14 with Fuseholder 1-pole IP 40, 5 x 20, 1-pole IP 40, 5 x 20, 1-pole IP 40, 5 x 20, 1-pole 6200.4120 6200.4220 6200.4320 6220 IEC Appliance Inlet C14 with Fuseholder 2-pole IP 40, 5 x 20, 2-pole IP 40, 5 x 20, 2-pole IP 40, 5 x 20, 2-pole 6220.5120 6220.5220 6220.5320 Accessories Cord retaining kits Cord retaining strain relief Flat head, Z Flat head, E Flat head, G Flat head, H 0888.0021 4700.0005 4700.0007 4700.0008 Mating Inlets/Plugs Category / Description Interconnection Cord Overview complete Interconnection Cord with IEC Plug E, Angled Interconnection Cord with IEC Plug E, Angled Interconnection Cord with IEC Plug E, Straight Interconnection Cord with IEC Plug G, Angled Interconnection Cord with IEC Plug G, Angled Interconnection Cord further types to 4758 Plug Overview complete IEC Plug E, Cord Connector (Rewireable), Straight, max. cable Diameter 8.5 mm IEC Plug E, Cord Connector (Rewireable), Angled, max. Cable Diameter 10 mm IEC Plug E, Cord Connector (Rewireable), Straight, max. Cable Diameter 10 mm IEC Plug E, Cord Connector (Rewireable), Angled, max. Cable Diameter 10 mm IEC Plug E, Cord Connector (Rewireable), Straight Plug further types to 4758 4732 4733 4735 4736 9009 ... 0607 0608 0609 607B 608B ... The specifications, descriptions and illustrations indicated in this document are based on Connectors current information. All content is subject to modifications and amendments.