4793.4200

4793 Connectors (Inlets/Outlets) https://www.schurter.com /PG07 IEC Appliance Inlet C20, Snap-in Mounting, Front Side, Solder or Quick-connect Terminal IEC C20 connector Snap-in mounting from front side Solder/quick connect terminals C20 IEC C20 connector Snap-in mounting from front side Solder/quick connect terminals Snap-in version C24 See below: Approvals and Compliances 70° C 70° C Description - Panel mount : Snap-in , front side - Appliance Inlet , Pin temperature 70 °C , protection class I or II - Safety of electrical appliances for household and similar purposes. Meets the requirements for appliances in unattended use. This includes the enhanced requirements of glow wire tests acc. to IEC 606952-11 or -12 & -13. - Solder / Quick Connect Other versions on request - Variant with notch for V-Lock mating Cordsets References Alternative: version with line filter   C20F;  5130  Weblinks pdf data sheet, html datasheet, General Product Information, Approvals, Distributor-Stock-Check, Accessories, Detailed request for product Newly available variants corresponding to V-Lock mating cordset. The connector is equipped with a notch intended for use with the latching cordset. The cord latching system prevents against accidental removal of the cordset. Technical Data   Ratings IEC Ratings UL/CSA Dielectric Strength Allowable Operation Temperature IP-Protection Protection against electric shock Terminal Panel Thickness S Material: Housing 16 A / 250 VAC; 50 Hz 20 A / 250 VAC; 60 Hz > 2 kVAC between L-N > 2 kVAC between L/N-PE (1 min/50 Hz) -25 °C to 70 °C Appliance inlet/-outlet C20 or C24 acc. to IEC 60320-1, UL 60320-1, CSA C22.2 no. 60320-1 (for cold conditions) pin-temperature 70 °C, 16 A, Protection Class I or II front side IP30 acc. to IEC 60529 Suitable for appliances with protection class I or II acc. to IEC 61140 Solder / Quick Connect Snap-in: 1/1.2/1.5/2/2.5/3 mm Thermoplastic, black / white, UL 94V-0 Approvals and Compliances Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in  Details about Approvals SCHURTER products are designed for use in industrial environments. They have approvals from independent testing bodies according to national and international standards. Products with specific characteristics and requirements such as required in the automotive sector according to IATF 16949, medical technology according to ISO 13485 or in the aerospace industry can be offered exclusively with customer-specific, individual agreements by SCHURTER. Approvals The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products. Approval Reference Type: 4793 Approval Logo Certificates Certification Body Description VDE Approvals VDE Certificate Number: 40030341 UL Approvals UL UR File Number: E96454 CCC Approvals CCC CCC Certificate Number: 2019180204011844, 2019180204008809 Connectors 1 4793 Connectors (Inlets/Outlets) https://www.schurter.com /PG07 Product standards Product standards that are referenced Organization Design Standard Description Designed according to IEC 60320-1 Appliance couplers for household and similar general purposes Designed according to UL 60320-1 Standard for Attachment Plugs and Receptacles Designed according to CSA C22.2 no. 60320-1 General Use Receptacles, Attachment Plugs, and Similar Wiring Devices Design Standard Description Suitable for applications acc. IEC/UL 62368-1 Audio/video, information and communication technology equipment - Part 1: Safety requirements Suitable for applications acc. IEC 60335-1 Safety of electrical appliances for household and similar purposes. Meets the requirements for appliances in unattended use. This includes the enhanced requirements of glow wire tests acc. to IEC 60695-2-11 or -12 & -13. Details Initiator Description CE declaration of conformity SCHURTER AG The CE marking declares that the product complies with the applicable requirements laid down in the harmonisation of Community legislation on its affixing in accordance with EU Regulation 765/2008. UKCA declaration of conformity SCHURTER AG The UKCA marking declares that the product complies with the applicable requirements laid down in the British Amendment of Regulation (EC) 765/2008. RoHS SCHURTER AG Directive RoHS 2011/65/EU, Amendment (EU) 2015/863 China RoHS SCHURTER AG The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March 2007. It is similar to the EU directive RoHS. REACH SCHURTER AG On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration, Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as "REACH") entered into force. SCHURTER AG V-Lock system are based on a matching plug-dose combination. The connector is equipped with a notch intended for use with the latching cordset. The cord latching system prevents against accidental removal of the cordset. SCHURTER AG Meets the requirements of IEC 60335-1 for appliances in unattended use. This includes the enhanced requirements of glow wire tests acc. to IEC 60695-2-11 or -12 &-13. Application standards Application standards where the product can be used Organization Compliances The product complies with following Guide Lines Identification White Paper Glow wire test Dimensions [mm] 21.0 24.0 - 0 +0.2 23.9 ±0.10 28.0 S 31.9 ±0.10 1) Panel cut-out E: Solder terminals: 28.5 mm E: Quick connect terminals 6.3 x 0.8 mm: 31.5 mm 2 +0.2 32.0 - 0 3.0 36.0 Connectors E max.R3.0 1) 4793 Connectors (Inlets/Outlets) https://www.schurter.com /PG07 All Variants Protection Class Color Panel mounting Panel Thickness s [mm] Terminal I black I black I I Order Number Snap-in 1 Quick connect terminals 6.3 x 0.8 mm 4793.3000 █ Snap-in 1.2 Quick connect terminals 6.3 x 0.8 mm 4793.8000 █ black Snap-in 1.5 Quick connect terminals 6.3 x 0.8 mm 4793.4000 █ black Snap-in 1.5 Quick connect terminals 6.3 x 0.8 mm 4793.4000.21 █ II black Snap-in 1.5 Quick connect terminals 6.3 x 0.8 mm 4793.4010 I black Snap-in 2 Quick connect terminals 6.3 x 0.8 mm 4793.5000 I black Snap-in 2 Quick connect terminals 6.3 x 0.8 mm 4793.5000.21 I black Snap-in 2.5 Quick connect terminals 6.3 x 0.8 mm 4793.6000 I black Snap-in 3 Quick connect terminals 6.3 x 0.8 mm 4793.7000 I black Snap-in 1 Solder terminals 3.8 x 0.8 mm 4793.3200 I black Snap-in 1.2 Solder terminals 3.8 x 0.8 mm 4793.8200 I black Snap-in 1.5 Solder terminals 3.8 x 0.8 mm 4793.4200 II black Snap-in 1.5 Solder terminals 3.8 x 0.8 mm 4793.4210 I black Snap-in 2 Solder terminals 3.8 x 0.8 mm 4793.5200 I black Snap-in 2.5 Solder terminals 3.8 x 0.8 mm 4793.6200 I black Snap-in 3 Solder terminals 3.8 x 0.8 mm 4793.7200 █ █ █ Most Popular. Availability for all products can be searched real-time:https://www.schurter.com/en/Stock-Check/Stock-Check-SCHURTER Suffix ".21" corresponds to the version with V-Lock mating cordset. The connector is equipped with a notch intended for use with the latching cordset. The cord latching system prevents against accidental removal of the cordset. Packaging unit   100 Pcs  Accessories Description Wire Harness Wire harness for SCHURTER products   Assorted Covers Rear Cover   0859.0047   RC320 Rear Cover for Power Entry Module   Connectors 3 4793 Connectors (Inlets/Outlets) https://www.schurter.com /PG07 Description Cord retaining kits Cord retaining strain relief   Flat head, L 4700.0011   Mating Outlets/Connectors Category / Description Connector Overview complete 4795, Mounting: Power Cord, Cable Connector: IEC C19 4795 4790, Mounting: Power Cord, Screw Connector: IEC C19 4790 0104U, Mounting: Power Supply Cord, Screw clamps Connector: IEC C19 0104U   Mating Outlets/Connectors shuttered Power Cord Overview complete VAC19KS, Overview, V-Lock cord retaining, diverse Connector IEC C19, diverse, black VAC19KS 29.04.2022   4 Connectors The specifications, descriptions and illustrations indicated in this document are based on current information. All content is subject to modifications and amendments. Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability and test each product selected for their own applications.