4797.0025

4797 Connectors (Inlets/Outlets) https://www.schurter.com /PG07 IEC Appliance Outlet J, Snap-in/Screw-on Mounting, Front Side, Solder or Quick-connect Terminal Snap-in version from front side Solder/quick connect terminals Screw-on mounting from front side Solder/quick connect terminals type J See below: Approvals and Compliances 70° C Description - Snap-in or screw-on mounting , front side - Connector , Pin temperature 70 °C Protection class I - V-Lock, P-Lock and Twylock compatible - Safety of electrical appliances for household and similar purposes. Meets the requirements for appliances in unattended use. This includes the enhanced requirements of glow wire tests acc. to IEC 606952-11 or -12 & -13. - Solder / Quick Connect Characteristics - Suitable for use in equipment according to IEC/UL 62368-1 Other versions on request - Other panel thickness - Variants in white color - For protection class II References Substitute for type   0723;  5213;  5216  Alternative: version with integrated light pipes   4797-5  Weblinks pdf data sheet, html datasheet, General Product Information, Approvals, Distributor-Stock-Check, Accessories, Detailed request for product, Landing Page The integration of light pipes in the appliance outlet provides status indication in smart PDUs. See PDU Landing Page for more information. Power Distribution Units Technical Data Ratings IEC Ratings UL/CSA Dielectric Strength Allowable Operation Temperature Protection against electric shock Terminal Panel Thickness S Material: Housing   16 A / 250 VAC; 50 Hz 20 A / 250 VAC; 60 Hz > 2.5 kVAC between L-N > 3 kVAC between L/N-PE (1 min/50 Hz) -25 °C to 70 °C Appliance inlet/-outlet type J acc. to IEC 60320-3 UL 498, CSA C22.2 no. 42 (for cold conditions) pin-temperature 70 °C, 16 A, Protection Class I Suitable for appliances with protection class I or II acc. to IEC 61140 Solder / Quick Connect Screw: max 8 mm Mounting screw torque max 0.5 Nm Snap-in: 0.8 mm to 3 mm Thermoplastic, black, UL 94V-0 Approvals and Compliances Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in  Details about Approvals SCHURTER products are designed for use in industrial environments. They have approvals from independent testing bodies according to national and international standards. Products with specific characteristics and requirements such as required in the automotive sector according to IATF 16949, medical technology according to ISO 13485 or in the aerospace industry can be offered exclusively with customer-specific, individual agreements by SCHURTER. Connectors 1 4797 Connectors (Inlets/Outlets) https://www.schurter.com /PG07 Approvals The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products. Approval Reference Type: 4797 Approval Logo Certificates Certification Body Description VDE Approvals VDE Certificate Number: 40040106 UL Approvals UL UL File Number: E103791 CCC Approvals CCC CCC Certificate Number: 2016180204002357 Design Standard Description Designed according to IEC 60320-1 Appliance couplers for household and similar general purposes Designed according to IEC 60320-3 Appliance couplers for household and similar general purposes Designed according to UL 498 Standard for Attachment Plugs and Receptacles Designed according to CSA C22.2 no. 42 General Use Receptacles, Attachment Plugs, and Similar Wiring Devices Design Standard Description Designed for applications acc. IEC/UL 62368-1 Audio/video, information and communication technology equipment - Part 1: Safety requirements Designed for applications acc. IEC 60335-1 Safety of electrical appliances for household and similar purposes. Meets the requirements for appliances in unattended use. This includes the enhanced requirements of glow wire tests acc. to IEC 60695-2-11 or -12 & -13. Details Initiator Description CE declaration of conformity SCHURTER AG The CE marking declares that the product complies with the applicable requirements laid down in the harmonisation of Community legislation on its affixing in accordance with EU Regulation 765/2008. UKCA declaration of conformity SCHURTER AG The UKCA marking declares that the product complies with the applicable requirements laid down in the British Amendment of Regulation (EC) 765/2008. RoHS SCHURTER AG Directive RoHS 2011/65/EU, Amendment (EU) 2015/863 China RoHS SCHURTER AG The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March 2007. It is similar to the EU directive RoHS. REACH SCHURTER AG On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration, Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as "REACH") entered into force. SCHURTER AG V-Lock system are based on a matching plug-dose combination. The connector is equipped with a notch intended for use with the latching cordset. The cord latching system prevents against accidental removal of the cordset. SCHURTER AG Meets the requirements of IEC 60335-1 for appliances in unattended use. This includes the enhanced requirements of glow wire tests acc. to IEC 60695-2-11 or -12 &-13. Product standards Product standards that are referenced Organization Application standards Application standards where the product can be used Organization Compliances The product complies with following Guide Lines Identification White Paper Glow wire test 2 Connectors 4797 Connectors (Inlets/Outlets) https://www.schurter.com /PG07 Dimensions [mm] Snap-in mounting from front side .5 R1 24.7 +0.2 37.6 -0 3 34 29.5 -0 +0.2 42 R 34.1 5 m ax . Screw-on from front side 54 +0.2 37.6 -0 3.6/M3 3 34 29.5 -0 +0.2 R6 24.7 Ø 45 R Ø 3.5 Ø 6x90° 45 ±0.1 34.1 5 m ax . All Variants Panel mounting Panel Thickness s [mm] Terminal Protection Class Order Number Snap-in 1 Quick connect terminals 6.3 x 0.8 mm I 4797.0010 Snap-in 1.2 Quick connect terminals 6.3 x 0.8 mm I 4797.0012 Snap-in 1.5 Quick connect terminals 6.3 x 0.8 mm I 4797.0015 █ Snap-in 2 Quick connect terminals 6.3 x 0.8 mm I 4797.0020 █ Snap-in 2.5 Quick connect terminals 6.3 x 0.8 mm I 4797.0025 Snap-in 3 Quick connect terminals 6.3 x 0.8 mm I 4797.0030 Snap-in 1 Solder terminals I 4797.3010 Snap-in 1.2 Solder terminals I 4797.3012 Snap-in 1.5 Solder terminals I 4797.3015 Snap-in 2 Solder terminals I 4797.3020 Snap-in 2.5 Solder terminals I 4797.3025 Snap-in 3 Solder terminals I 4797.3030 Screw - Quick connect terminals 6.3 x 0.8 mm I 4797.0000 █ Screw - Solder terminals I 4797.3000 █ █ █ Most Popular. Availability for all products can be searched real-time:https://www.schurter.com/en/Stock-Check/Stock-CheckSCHURTER Packaging unit   50 Pcs  Connectors 3 4797 Connectors (Inlets/Outlets) https://www.schurter.com /PG07 Accessories Description Wire Harness Wire harness for SCHURTER products   Assorted Covers Rear Cover   0859.0075   RC320 Rear Cover for Power Entry Module   Cord retaining kits Cord retaining strain relief   Countersunk, J 4700.0009 Flat head, L 4700.0011   Mating Inlets/Plugs Category / Description Plug Overview complete 4796, Mounting: Power Cord, Cable, Plug: IEC I 4796 4789, Mounting: Power Cord, Screw, Plug: IEC I 4789   Mating Inlets/Plugs shuttered Interconnection Cord Overview complete 3-100-362 VAC19KS, Interconnection, V-Lock cord retaining, 3.0 m, Connector IEC C19, H05VV-F3G1.5 / SJT 3x14 AWG, black 3-100-363 VAC19KS, Interconnection, V-Lock cord retaining, 1.0 m, Connector IEC C19, H05VV-F3G1.5, black 6051.2147 VAC19KS, Interconnection, V-Lock cord retaining, 1.0 m, Connector IEC C19, H05VV-F3G1.5 / SJT 3x14 AWG, black 6051.2197 05.01.2022 VAC19KS, Interconnection, V-Lock cord retaining, 2.0 m, Connector IEC C19, H05VV-F3G1.5 / SJT 3x14 AWG, black   4 Connectors The specifications, descriptions and illustrations indicated in this document are based on current information. All content is subject to modifications and amendments. Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability and test each product selected for their own applications.