5008
Power Entry Modules with Line Filter
https://www.schurter.com /PG06
IEC Appliance Inlet C8 with Filter, Front Side Mounting
Snap-in mounting from front side
Screw-on mounting from front side
C8
See below:
Approvals and Compliances
70° C
Description
- Panel mount :
Screw-on or snap-in mounting front side
- 2 Functions :
Appliance Inlet Protection class II , Line filter in standard and medical
version
- Solder / Quick Connect
Characteristics
- Compact high performance filter
- Suitable for use in medical equipment according to IEC/UL 60601-1 (1
MOOP, 1 MOPP)
For applications according IEC/UL 62368-1 we recommend variants
with bleed resistor
Other versions on request
- Standard version without X-capacitor
- Polarized C8 connector
References
Alternative: version without line filter 2576; 2578
Weblinks
pdf data sheet, html datasheet, General Product Information, Approvals,
Distributor-Stock-Check, Accessories, Detailed request for product
Technical Data
Ratings IEC
Ratings UL/CSA
Dielectric Strength
Impulse Withstand Voltage
Allowable Operation Temperature
Climatic Category
IP-Protection
Protection Class
Terminal
Panel Thickness S
Material
0.5 - 2.5 A @ Ta 40 °C / 250 VAC; 50 Hz
0.5 - 6 A @ Ta 40 °C / 250 VAC; 60 Hz
> 1.7 kVDC between L-N
> 4.5 kVDC between L/N-PE
Test voltage (2 sec)
> 2.5 kV between L-N
-25 °C to 85 °C
Appliance inlet/-outlet
Line Filter
MTBF
C8 acc. to IEC 60320-1
UL 498, CSA C22.2 no. 42 (for cold
conditions) pin-temperature 70 °C,
2.5 A, Protection Class II
Standard and Medical Version, IEC
60939, UL 1283, CSA C22.2 no. 8
Technical Details
> 6'700'000 h acc. to MIL-HB-217 F
25/085/21 acc. to IEC 60068-1
front side IP40 acc. to IEC 60529
Suitable for appliances with protection
class II acc. to IEC 61140
Solder pin / quick connect terminals 6.3
x 0.8 / 4.8 x 0.8 mm
Screw
Mounting screw torque max 0.5 Nm
Snap-in 1 mm to 2.5 mm
Thermoplastic, black, UL 94V-0
Approvals and Compliances
Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about
Approvals
SCHURTER products are designed for use in industrial environments. They have approvals from independent testing bodies according to national
and international standards. Products with specific characteristics and requirements such as required in the automotive sector according to IATF
16949, medical technology according to ISO 13485 or in the aerospace industry can be offered exclusively with customer-specific, individual agreements by SCHURTER.
EMC Products
1
5008
Power Entry Modules with Line Filter
https://www.schurter.com /PG06
Approvals
The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products.
Approval Reference Type: 5008
Approval Logo
Certificates
Certification Body
Description
VDE Approvals
VDE
Certificate Number: 40029278
UL Approvals
UL
UR File Number: E72928
Design
Standard
Description
Designed according to
IEC 60320-1
Appliance couplers for household and similar general purposes
Designed according to
IEC 60939
Passive filters for suppressing electromagnetic interference
Designed according to
IEC 60127-6
Miniature fuses. Part 6. Fuse-holders for miniature fuse-links
Designed according to
IEC 61058-1
Switches for appliances. Part 1. General requirements
Designed according to
UL 498
Standard for Attachment Plugs and Receptacles
Designed according to
UL 1283
Electromagnetic interference filters
Designed according to
CSA C22.2 no. 42
General Use Receptacles, Attachment Plugs, and Similar Wiring Devices
Designed according to
CSA C22.2 no. 8
Electromagnetic interference (EMI) filters
Design
Standard
Description
Suitable for applications acc.
IEC/UL 62368-1
Audio/video, information and communication technology equipment - Part
1: Safety requirements
Suitable for applications acc.
IEC 60601-1
Medical electrical equipment - Part 1: General requirements for basic
safety and essential performance
Details
Initiator
Description
CE declaration of conformity
SCHURTER AG
The CE marking declares that the product complies with the applicable
requirements laid down in the harmonisation of Community legislation on
its affixing in accordance with EU Regulation 765/2008.
UKCA declaration of conformity
SCHURTER AG
The UKCA marking declares that the product complies with the applicable
requirements laid down in the British Amendment of Regulation (EC)
765/2008.
RoHS
SCHURTER AG
Directive RoHS 2011/65/EU, Amendment (EU) 2015/863
China RoHS
SCHURTER AG
The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March
2007. It is similar to the EU directive RoHS.
REACH
SCHURTER AG
On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration,
Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as
"REACH") entered into force.
Medical Equipment
SCHURTER AG
Suitable for use in medical equipment according to IEC/UL 60601-1 (1
MOOP, 1 MOPP)
Product standards
Product standards that are referenced
Organization
Application standards
Application standards where the product can be used
Organization
Compliances
The product complies with following Guide Lines
Identification
2
EMC Products
5008
Power Entry Modules with Line Filter
https://www.schurter.com /PG06
Dimension [mm]
Screw-on mounting from front side
34.5
45.7
ø3.4
+0.20
0
20.2
28 ±0.15
+0.20
0
16
20
37
R4
ø6.3
16
2.2
28 ±0.10
18
max. R 0.5
ø3.5
Snap-in mounting from front side
34.5
16
2.2
20
27.2
18
R3
+0.20
0
24
+0.20
0
16
45.7
max. R 2
EMC Products
3
5008
Power Entry Modules with Line Filter
https://www.schurter.com /PG06
Technical Data of Filter-Components
Rated Current
[A]
Filter-Type
Inductances
L [mH]
Capacitance
CX [nF]
Capacitance
CY [nF]
R [MΩ]
0.5
Standard version
2 x 18
100
-
-
1
Standard version
2x8
-
-
-
1
Standard version
2x8
100
-
-
2.5
Standard version
2 x 1.2
100
-
-
4
Standard version
2 x 0.8
100
-
-
Standard version
2 x 0.3
100
-
-
0.5
6
Medical Version (M5)
2 x 18
100
-
1
1
Medical Version (M5)
2x8
100
-
1
2.5
Medical Version (M5)
2 x 1.2
100
-
1
4
Medical Version (M5)
2 x 0.8
100
-
1
6
Medical Version (M5)
2 x 0.3
100
-
1
Diagrams
Medical Version (M5)
Standard version
L
L1
1)
L’
L
2)
1)
R
Cx
L2
N
N’
1) Line
2) Load
N
L1
Cx
L’
2)
L2
N’
1) Line
2) Load
Derating Curves
Admissible operating
current in % of In
100
80
60
40
20
0
0
20
40
60
85
100
Ambient air temperature Ta °C
Attenuation Loss
- - - - 50Ω differential mode _____ 50Ω common mode
Standard version
6A
4A
0.5 A
4
EMC Products
2.5 A
1A
5008
Power Entry Modules with Line Filter
https://www.schurter.com /PG06
Medical version (M5)
6A
4A
2.5 A
1A
0.5 A
All Variants
Rated Current [A]
Filter-Type
Mounting
Terminal
Order Number
0.5
Standard version
Snap-in 1.0mm
Quick connect terminal 4.8 x 0.8 mm
5008.1010
0.5
Standard version
Snap-in 1.5mm
Quick connect terminal 4.8 x 0.8 mm
5008.2010
1
Standard version
Snap-in 1.5mm
Solder terminal
5008.2021
1
Standard version
Snap-in 1.5mm
Quick connect terminal 6.3 x 0.8 mm
5008.2001
1
Standard version
Snap-in 1.5mm
Quick connect terminal 4.8 x 0.8 mm
5008.2211
1
Standard version
Snap-in 2.0mm
Quick connect terminal 4.8 x 0.8 mm
5008.3011
2.5
Standard version
Screw
Solder terminal
5008.0022
2.5
Standard version
Screw
Quick connect terminal 6.3 x 0.8 mm
5008.0002
2.5
Standard version
Screw
Quick connect terminal 4.8 x 0.8 mm
5008.0012
2.5
Standard version
Snap-in 1.0mm
Quick connect terminal 4.8 x 0.8 mm
5008.1012
2.5
Standard version
Snap-in 1.5mm
Solder terminal
5008.2022
2.5
Standard version
Snap-in 1.5mm
Quick connect terminal 4.8 x 0.8 mm
5008.2012
2.5
Standard version
Snap-in 2.0mm
Solder terminal
5008.3022
2.5
Standard version
Snap-in 2.0mm
Quick connect terminal 6.3 x 0.8 mm
5008.3002
4
Standard version
Snap-in 1.5mm
Quick connect terminal 4.8 x 0.8 mm
5008.2014
6
Standard version
Screw
Quick connect terminal 6.3 x 0.8 mm
5008.0006
6
Standard version
Snap-in 1.0mm
Quick connect terminal 4.8 x 0.8 mm
5008.1016
6
Standard version
Snap-in 1.5mm
Quick connect terminal 4.8 x 0.8 mm
5008.2016
0.5
Medical Version (M5)
Snap-in 1.0mm
Quick connect terminal 4.8 x 0.8 mm
5008.1110
1
Medical Version (M5)
Screw
Quick connect terminal 4.8 x 0.8 mm
5008.0111
1
Medical Version (M5)
Snap-in 1.0mm
Quick connect terminal 4.8 x 0.8 mm
5008.1111
1
Medical Version (M5)
Snap-in 2.0mm
Quick connect terminal 4.8 x 0.8 mm
5008.3111
2.5
Medical Version (M5)
Snap-in 1.0mm
Quick connect terminal 4.8 x 0.8 mm
5008.1112
2.5
Medical Version (M5)
Snap-in 2.0mm
Quick connect terminal 6.3 x 0.8 mm
5008.3102
4
Medical Version (M5)
Snap-in 1.0mm
Quick connect terminal 4.8 x 0.8 mm
5008.1114
4
Medical Version (M5)
Snap-in 1.5mm
Quick connect terminal 4.8 x 0.8 mm
5008.2114
6
Medical Version (M5)
Snap-in 1.0mm
Quick connect terminal 4.8 x 0.8 mm
5008.1116
6
Medical Version (M5)
Snap-in 1.5mm
Quick connect terminal 4.8 x 0.8 mm
5008.2116
Availability for all products can be searched real-time:https://www.schurter.com/en/Stock-Check/Stock-Check-SCHURTER
Packaging unit
20 Pcs
EMC Products
5
5008
Power Entry Modules with Line Filter
https://www.schurter.com /PG06
Mating Outlets/Connectors
Category / Description
Power Cord Overview complete
Cord Sets 2.5 A, IEC Connector, Black, 2.0 m, H03VVH2-F 2x0,75mm2, Connector IEC C7, H05VVH2-F 2x0.75 mm2 2m
6013.0474
BLK, black
Cord Sets 2.5 A, IEC Connector, Black, 4.0 m, H03VVH2-F 2x0,75mm2, Connector IEC C7, H05VVH2-F2G0.75, black
6013.0478
Power Supply Cord Overview complete
Cord Sets 2.5 A, North America, Black, 2.0 m, SVT 2x18AWG, Connector IEC C7, NISPT-2, black
6010.5274
Cord Sets 2.5 A, North America, Black, 4.0 m, SVT 2x18AWG, Connector IEC C7, NISPT-2, black
6010.5278
15.08.2023
6
EMC Products
The specifications, descriptions and illustrations indicated in this document are based on current
information. All content is subject to modifications and amendments. Information furnished is believed
to be accurate and reliable. However, users should independently evaluate the suitability and test each
product selected for their own applications.
