5411.9051101

Power Entry Modules with Line Filter Felcom 54 www.schurter.com/pg06 Standard- or Medical-Filter IEC Appliance Inlet C14 Modular Assembling Options 5411.XX5X.XXX Appliance inlet Fuseholder Line filter 5431.X05X.XXX Appliance inlet Appliance outlet Switch Line filter C14 70° C F 70° C - Panel Mount: Snap-in version from front side - 2 - 5 Functions: Appliance Inlet Protection class I, Connector, Line Switch 2-pole, Fuseholder for fuse-links 5 x 20 mm 1- or 2-pole, Line filter in standard and medical version - Solder terminals 3.5 x 0.8 mm or quick connect terminals 6.3 x 0.8 mm - Alternative: version without line filter Felcom 64 Description Characteristics - Modular component selection - Individual components soldered on a printed circuit board - Plug removal necessary for fuse-link replacement Fuse drawer meets requirements of medical standard IEC/EN 60601-1 The fuseholder is accessible from the equipment front - Technical data of filter-components see blockfilter type 5500 - Fully insulated from the rear - Qualified for use in equipment according IEC/EN 60950 Other versions on request References Weblinks General Product Information Approvals - Line switch with other rocker marking - VDE License Number: 101307 - UL License Number: E72928 Approvals, RoHS, CHINA-RoHS, Mating Connectors, e-Store, Distributor-Stock-Check, Accessories Technical Data Ratings IEC Ratings UL/CSA Leakage Current Dielectric Strength 1 - 10 A @ Ta 40 °C / 250 VAC; 50 Hz 1 - 10 A @ Ta 40 °C / 250 VAC; 60 Hz standard < 0.5 mA (250 V / 60 Hz) medical < 5 µA (250 V / 60 Hz) > 1.7 kVDC between L-N > 2.7 kVDC between L/N-PE Test voltage (2 sec) -25 °C to 85 °C 25/085/21 acc. to IEC 60068-1 from front side IP 40 acc. to IEC 60529 Suitable for appliances with protection class 1 acc. to IEC 61140 Solder terminals 3.5 x 0.8 mm or quick connect terminals 6.3 x 0.8 mm Snap-in: 1/1.2/1.5/2/2.5/3 mm1/1.2/1.5 /2/2.5/3 mm Thermoplastic, black, UL 94V-0 Appliance-Inlet/-Outlet C14 acc. to IEC/EN 60320-1, F acc. to IEC/EN 60320-2-2, UL 498, CSA C22.2 no. 42 (for cold conditions) pin-temperature 70 °C, 10 A, Protection Class 1 1 or 2 pole, Shocksafe category PC2 acc. to IEC 60127-6, for fuse-links 5 x 20 mm 5 x 20: 2 W (1 pole)/ 1.6 W (2-pole) per pole Admissible power acceptance at higher ambient temperature see derating curves Rocker switch 2-pole, non-illuminated, acc. to IEC 61058-1 Technical details Standard Version, IEC 60939, IEC 60601-1, UL 1283, UL 544, EN 133 200, CSA C22.2 no. 8 Technical details > 1'400'000 h acc. to MIL-HB-217 F Fuseholder Allowable Operation Temp. Climatic Category Degree of Protection Protection Class Terminal Panel Thickness s Material: Housing Rated Power Acceptance @ Ta 23 °C Power Acceptance @ Ta > 23°C Line Switch Line Filter MTBF EMC Products  Felcom 54 www.schurter.com/pg06 Dimensions Power Entry Modules with Line Filter Variants 5411.XX5X.XXX Mounting Ø: 63+0,2 x 27.6+0,2 Variants 5421.X05X.XXX Mounting Ø: 85.9+0,2 x 27.6+0,2 Variants 5423.XX5X.XXX Mounting Ø: 96.4+0,2 x 27.6+0,2 Variants 5424.XX5X.XXX Mounting Ø: 87.9+0,2 x 27.6+0,2 Variants 5431.X05X.XXX Mounting Ø: 111.1+0,2 x 27.6+0,2 Variants 5432.XX5X.XXX Mounting Ø: 121.6+0,2 x 27.6+0,2 Technical Data of Filter-Components Rated Current [A] 1 2 4 6 8 10 1 2 4 6 8 10 Filter-Type Standard Version Standard Version Standard Version Standard Version Standard Version Standard Version Medical Version (M5) Medical Version (M5) Medical Version (M5) Medical Version (M5) Medical Version (M5) Medical Version (M5) Inductances L [mH] 2 x 11 2x4 2 x 1.6 2 x 0.7 2 x 0.6 2 x 0.4 2 x 11 2x4 2 x 1.6 2 x 0.7 2 x 0.6 2 x 0.4 Capacitance CX [nF] 47 47 47 47 47 47 47 47 47 47 47 47 Capacitance CY [nF] 2.2 2.2 2.2 2.2 2.2 2.2 R [MΩ] 1 1 1 1 1 1  EMC Products Power Entry Modules with Line Filter Felcom 54 www.schurter.com/pg06 5423 5424 Diagrams 5411 5421 1) Line 2) Load 1 1) Load 2 2) Load 1 1) Load 2 2) Load 1 1) Line 2) Load 1 5431 5432 1) Load 2 2) Load 1 1) Load 2 2) Load 1 Derating Curves 1-pole 2.0 2-pole Admissible power acceptance in Watt per pole 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0.0 0 20 40 60 80 100 I = 1.0 In I = 0.7 In I = < < In Admissible power acceptance in Watt 1.5 I = 1.0 In 1.0 I = 0.7 In I = < < In 0.5 0.0 0 20 40 60 80 100 Ambient air temperature Ta °C Ordering instructions Ambient air temperature Ta °C 54 XX. X X XX. XX X Type of line filter 1 = standard 3 = medical “Snap-in” panel thickness 10 = 1,0 mm 12 = 1,2 mm 15 = 1,5 mm 20 = 2,0 mm 25 = 2,5 mm 30 = 3,0 mm Connection 51 = solder terminals 3,5 x 0,8 mm 53 = quick connect terminals 6,3 x 0,8 mm Fuseholder 5 x 20 mm 0 = without fuseholder 1 = 1-pole 2 = 2-pole Line filter 1 = 1 Amp. 2 = 2 Amp. 4 = 4 Amp. 6 = 6 Amp. 8 = 8 Amp. 9 = 10 Amp. Module combination 11 = Appliance inlet, fuseholder 21 = Appliance inlet, appliance outlet 23 = Appliance inlet, fuseholder, appliance outlet 24 = Appliance inlet, fuseholder, switch 31 = Appliance inlet, appliance outlet, switch 32 = Appliance inlet, fuseholder, appliance outlet, switch Base model Packaging unit 10 Pcs EMC Products  Felcom 54 www.schurter.com/pg06 Accessories Description Power Entry Modules with Line Filter Cord retaining kits Cord retaining strain relief Flat head, A 4700.0001 Mating Inlets/Plugs Category / Description Interconnection Cord Overview complete Interconnection Cord with IEC Plug E, Angled Interconnection Cord with IEC Plug E, Angled Interconnection Cord with IEC Plug E, Straight Interconnection Cord with IEC Plug G, Angled Interconnection Cord with IEC Plug G, Angled Interconnection Cord further types to Felcom 54 Plug Overview complete IEC Plug E, Cord Connector (Rewireable), Straight, max. cable Diameter 8.5 mm IEC Plug E, Cord Connector (Rewireable), Angled, max. Cable Diameter 10 mm IEC Plug E, Cord Connector (Rewireable), Straight, max. Cable Diameter 10 mm IEC Plug E, Cord Connector (Rewireable), Angled, max. Cable Diameter 10 mm IEC Plug E, Cord Connector (Rewireable), Straight Plug further types to Felcom 54 4732 4733 4735 4736 9009 ... 0607 0608 0609 607B 608B ... Mating Outlets/Connectors Appliance Outlet Overview complete IEC Appliance Outlet F, Screw-on Mounting, Front Side, Solder or Quick-connect Terminal IEC Appliance Outlet F, Snap-in Mounting, Front Side, Solder or Quick-connect Terminal IEC Appliance Outlet F or H, Screw-on Mounting, Front Side, Solder, PCB or Quick-connect Terminal IEC Appliance Outlet F or H, Screw-on Mounting, Front Side, Solder or Quick-connect Terminal Appliance Outlet further types to Felcom 54 Connector Overview complete IEC Connector C15, Rewireable, Straight IEC Connector C15A, Rewireable, Straight IEC Connector C15A, Rewireable, Straight IEC Connector C15A, Rewireable, Angled IEC Connector C13, Rewireable, Angled Connector further types to Felcom 54 Power Cord Overview complete Power Cord with IEC Connector C13, Angled Power Cord with IEC Connector C13, Angled Power Cord with IEC Connector C13, Angled Power Cord with IEC Connector C13, Angled Power Cord with IEC Connector C13 Power Cord further types to Felcom 54 0311 3011 3012 3013 3020 ... 0101 0102 0102-G 0112 4012 ... 4787 4788 5091 5092 4 The specifications, descriptions and illustrations indicated in this document are based on EMC Products current information. All content is subject to modifications and amendments.