5707.0601.212

5707 Power Entry Modules with Line Filter https://www.schurter.com /PG06 IEC Appliance Inlet C14 or C18 with Filter, Protection Degree IP65 into the Appliance, Fuseholder 1- or 2-pole, Front or Rear Mounting IEC connector C14 or C18 with filter Screw-on from front side C14 With V-Lock Connection white 5707.xxxx.xxx.22 with IP54 V-Lock cord connection from front side white 5707 with IP54 Inlet Gasket C18 See below: Approvals and Compliances 70° C 70° C Description - Panel mount : Screw-on version from front or rear side , Screws with sealing are included - 4 Functions : Appliance Inlet protection class I or II , Line filter in standard and medical version , Fuseholder for fuse-links 5 x 20 mm , IP65 protection into the appliance - For front side mounting versions a sealing kit IP54 for the power supply connection is available as an accessory: 4700.0021 - Option suffix ".22" offers IP54 for the power input in combination with V-Lock cordsets - Quick connect terminals 6.3 x 0.8 mm Unique Selling Proposition - Sealed power entry module - Strong in Design and Safety - IP 65 protection to the appliance - IP 54 protection to the cord connection Characteristics - Extreme robust design - All single elements are already wired - Screw type fuse carrier, slotted - With EMC-shield - Especially for applications in rough environments (see technical data) - For applications according IEC/UL 62368-1 we recommend variants with bleed resistor Suitable for use in medical equipment according to IEC/UL 60601-1 (1 MOOP, 1 MOPP) Other versions on request - Class X1- and Y1-capacitors for enhanced withstand voltage - Medical Version (M80) - Additional factory-mounted sealing (IP54) of power input - Version with current rating 3 A Weblinks pdf data sheet, html datasheet, General Product Information, Approvals, Distributor-Stock-Check, Accessories, Detailed request for product Newly available variants corresponding to V-Lock mating cordset. The connector is equipped with a notch intended for use with the latching cordset. The cord latching system prevents against accidental removal of the cordset. Technical Data Ratings IEC Ratings UL/CSA Leakage Current Dielectric Strength Allowable Operation Temperature Climatic Category IP-Protection Protection Class Terminal Panel Thickness S Material   1 - 8 A @ Ta 40 °C / 250 VAC; 50 Hz 1 - 8 A @ Ta 40 °C / 250 VAC; 60 Hz standard < 0.5 mA (250 V / 60 Hz) medical < 5 µA (250 V / 60 Hz) > 1.7 kVDC between L-N > 2.7 kVDC between L/N-PE Test voltage (2 sec) > 4.0 kVDC Protection class II between L/N-PE -25 °C to 85 °C 25/085/21 acc. to IEC 60068-1 front side IP65 acc. to IEC 60529 rear-side IP65 acc. to IEC 60529 Suitable for appliances with protection class I or II acc. to IEC 61140 Quick connect terminals 6.3 x 0.8 mm Screw, max 3 mm Mounting screw torque max 0.8 Nm 2 screws M3 with sealing are provided black / white / metallic, UL 94V-0 Appliance inlet/-outlet Fuseholder Rated Power Acceptance @ Ta 23 °C Power Acceptance @ Ta > 23°C Line Filter MTBF C14 / C18 acc. to IEC 60320-1 UL 498, CSA C22.2 no. 42 (for cold conditions) pin-temperature 70 °C, 8 A, Protection Class I or II 1-/2-pole, Shocksafe category PC2 acc. to IEC 60127-6, for fuse-links 5 x 20 mm 5 x 20: 1.6 W 1-pole/ 1,2 W 2-pole per pole Admissible power acceptance at higher ambient temperature see derating curves Standard and Medical Version, IEC 60939, UL 1283, CSA C22.2 no. 8 Technical Details > 2'800'000 h acc. to MIL-HB-217 F Approvals and Compliances EMC Products 1 5707 Power Entry Modules with Line Filter https://www.schurter.com /PG06 Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in  Details about Approvals SCHURTER products are designed for use in industrial environments. They have approvals from independent testing bodies according to national and international standards. Products with specific characteristics and requirements such as required in the automotive sector according to IATF 16949, medical technology according to ISO 13485 or in the aerospace industry can be offered exclusively with customer-specific, individual agreements by SCHURTER. Approvals The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products. Approval Reference Type: 5707 Approval Logo Certificates Certification Body Description VDE Approvals VDE Certificate Number: 40016382 UL Approvals UL UR File Number: E72928 CQC Approvals CQC CQC Certificate Number: CQC21001310097 Design Standard Description Designed according to IEC 60320-1 Appliance couplers for household and similar general purposes Designed according to IEC 60939 Passive filters for suppressing electromagnetic interference Designed according to IEC 60127-6 Miniature fuses. Part 6. Fuse-holders for miniature fuse-links Designed according to IEC 61058-1 Switches for appliances. Part 1. General requirements Designed according to UL 498 Standard for Attachment Plugs and Receptacles Designed according to UL 1283 Electromagnetic interference filters Designed according to CSA C22.2 no. 42 General Use Receptacles, Attachment Plugs, and Similar Wiring Devices Designed according to CSA C22.2 no. 8 Electromagnetic interference (EMI) filters Design Standard Description Suitable for applications acc. IEC/UL 62368-1 Audio/video, information and communication technology equipment - Part 1: Safety requirements Suitable for applications acc. IEC 60601-1 Medical electrical equipment - Part 1: General requirements for basic safety and essential performance Suitable for applications acc. IEC 60335-1 Safety of electrical appliances for household and similar purposes. Meets the requirements for appliances in unattended use. This includes the enhanced requirements of glow wire tests acc. to IEC 60695-2-11 or -12 & -13. Product standards Product standards that are referenced Organization Application standards Application standards where the product can be used Organization 2 EMC Products 5707 Power Entry Modules with Line Filter https://www.schurter.com /PG06 Compliances The product complies with following Guide Lines Identification Details Initiator Description CE declaration of conformity SCHURTER AG The CE marking declares that the product complies with the applicable requirements laid down in the harmonisation of Community legislation on its affixing in accordance with EU Regulation 765/2008. UKCA declaration of conformity SCHURTER AG The UKCA marking declares that the product complies with the applicable requirements laid down in the British Amendment of Regulation (EC) 765/2008. RoHS SCHURTER AG Directive RoHS 2011/65/EU, Amendment (EU) 2015/863 China RoHS SCHURTER AG The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March 2007. It is similar to the EU directive RoHS. REACH SCHURTER AG On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration, Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as "REACH") entered into force. SCHURTER AG V-Lock system are based on a matching plug-dose combination. The connector is equipped with a notch intended for use with the latching cordset. The cord latching system prevents against accidental removal of the cordset. White Paper Glow wire test SCHURTER AG Meets the requirements of IEC 60335-1 for appliances in unattended use. This includes the enhanced requirements of glow wire tests acc. to IEC 60695-2-11 or -12 &-13. Medical Equipment SCHURTER AG Suitable for use in medical equipment according to IEC/UL 60601-1 (1 MOOP, 1 MOPP) Dimensions [mm] Mounting from front side 59.6 36 ±0.20 3.5 12 43.6 ±0.20 0.5 R3 .5 R1 .2 ø 3.4 30 29.2 29 +0.20 0 32.2 32 33 42 R4.5 R2 ø 3.2 .5 36 ±0.15 +0.20 0 51 Mounting from rear side 59.6 36 ±0.20 3.5 .2 ø 3.4 12 43.6 ±0.20 0.5 R3 5 . R1 30 29 +0.20 0 33.5 3x0.5 32 33 42 R4.5 R1 R1 .5 36 ±0.15 30.5 +0.20 0 51 Fixing Screws M3 EMC Products 3 5707 Power Entry Modules with Line Filter https://www.schurter.com /PG06 Assembly Instructions Mounting standard version A   B 3/4 C 3 1 1 4 2 2 2 1 A) front view B) detail front mounting type C) detail rear mounting type 1) sealing of flange 2) sealing of fuseholder 3) sealing of screw hole (front mounting type: sealing ring on screw head) 4) sealing of screw hole (rear mounting type: sealing on screw thread) Important: - use supplied fuse caps (2) and mounting screws (3/4) - optimal sealing requires even and solid panel opening - recommended tightening torque for mounting screws (3/4): 0.5-0.8 Nm - recommended tightening torque for fuse holder (2): 0.4 Nm - IP65 protection between the inlet and connector pins, but no IP rating between the connector pins and the plug of the power cord! Technical Data of Filter-Components Rated Current [A] Filter-Type Inductances L [mH] Capacitance CX [nF] Capacitance CY [nF] R [MΩ] 1 Standard version 2 x 12 100 2.2 1 2 Standard version 2 x 5.2 100 2.2 1 4 Standard version 2x2 100 2.2 1 6 Standard version 2 x 0.8 100 2.2 1 8 Standard version 2 x 0.4 100 2.2 1 1 Medical Version (M5) 2 x 12 100 - 1 2 Medical Version (M5) 2 x 5.2 100 - 1 4 Medical Version (M5) 2x2 100 - 1 6 Medical Version (M5) 2 x 0.8 100 - 1 8 Medical Version (M5) 2 x 0.4 100 - 1 2 Medical Version (M80) 2 x 5.2 100 0.47 1 4 Medical Version (M80) 2x2 100 0.47 1 Diagrams Standard version L Medical Version (M5) 1) PE F2 N L' F1 L1 Cx Cy R L2 Cy 1) Line 2) Load 4 L PE' 2) 1) PE N' N 1) Line 2) Load EMC Products F1 F2 L1 Cx L' PE' 2) R L2 N' 5707 Power Entry Modules with Line Filter https://www.schurter.com /PG06 Derating Curves 2-pole Admissible power acceptance in Watt 1.6 1.4 1.2 I = 1.0 In 1.0 0.8 I = 0.7 In 0.6 I =