6100.4220

6100-4 Connectors (Inlets/Outlets) https://www.schurter.com /PG07 IEC Appliance Inlet C14, Snap-in Mounting, Front Side, Solder or Quick-connect Terminal 6100-4 C14 See below: Approvals and Compliances 70° C Description - Panel mount : Snap-in version front side - 1 Function : - Appliance Inlet , Pin temperature 70 °C , Protection class I - Solder / Quick Connect Other versions on request - Other panel thickness - Types for enhanced glow wire test requirements acc. IEC 60695-212 and -13 for the use in unattended household equipment acc. IEC 60335-1 References Alternative: protection class II version   6102-5;  6102-5  Alternative: version with line filter   5110;  5120  Weblinks pdf data sheet, html datasheet, General Product Information, Approvals, Distributor-Stock-Check, Accessories, Detailed request for product Technical Data   Ratings IEC Ratings UL/CSA Dielectric Strength Allowable Operation Temperature IP-Protection Protection against electric shock Terminal Panel Thickness S Material: Housing 10 A / 250 VAC; 50 Hz 15 A / 250 VAC; 60 Hz > 2 kVAC between L-N > 2 kVAC between L/N-PE (1 min/50 Hz) -25 °C to 70 °C Appliance inlet/-outlet C14 acc. to IEC 60320-1, UL 60320-1, CSA C22.2 no. 60320-1 (for cold conditions) pin-temperature 70 °C, 10 A, Protection Class I front side IP30 acc. to IEC 60529 Suitable for appliances with protection class I acc. to IEC 61140 Solder / Quick Connect Snap-in: 1/1.2/1.5/2/2.5/3 mm Thermoplastic, black, UL 94V-0 Approvals and Compliances Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in  Details about Approvals SCHURTER products are designed for use in industrial environments. They have approvals from independent testing bodies according to national and international standards. Products with specific characteristics and requirements such as required in the automotive sector according to IATF 16949, medical technology according to ISO 13485 or in the aerospace industry can be offered exclusively with customer-specific, individual agreements by SCHURTER. Approvals The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products. Approval Reference Type: 6100 Approval Logo Certificates Certification Body Description VDE Approvals VDE Certificate Number: 40015595 UL Approvals UL UL File Number: E96454 CCC Approvals CCC CCC Certificate Number: Connectors 1 6100-4 Connectors (Inlets/Outlets) https://www.schurter.com /PG07 Product standards Product standards that are referenced Organization Design Standard Description Designed according to IEC 60320-1 Appliance couplers for household and similar general purposes Designed according to UL 60320-1 Standard for Attachment Plugs and Receptacles Designed according to CSA C22.2 no. 60320-1 General Use Receptacles, Attachment Plugs, and Similar Wiring Devices Design Standard Description Designed for applications acc. IEC/UL 62368-1 Audio/video, information and communication technology equipment - Part 1: Safety requirements Designed for applications acc. IEC 60335-1 Safety of electrical appliances for household and similar purposes. Meets the requirements for appliances in unattended use. This includes the enhanced requirements of glow wire tests acc. to IEC 60695-2-11 or -12 & -13. Details Initiator Description CE declaration of conformity SCHURTER AG The CE marking declares that the product complies with the applicable requirements laid down in the harmonisation of Community legislation on its affixing in accordance with EU Regulation 765/2008. UKCA declaration of conformity SCHURTER AG The UKCA marking declares that the product complies with the applicable requirements laid down in the British Amendment of Regulation (EC) 765/2008. RoHS SCHURTER AG Directive RoHS 2011/65/EU, Amendment (EU) 2015/863 China RoHS SCHURTER AG The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March 2007. It is similar to the EU directive RoHS. REACH SCHURTER AG On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration, Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as "REACH") entered into force. White Paper Glow wire test SCHURTER AG Meets the requirements of IEC 60335-1 for appliances in unattended use. This includes the enhanced requirements of glow wire tests acc. to IEC 60695-2-11 or -12 &-13. Application standards Application standards where the product can be used Organization Compliances The product complies with following Guide Lines Identification Dimensions [mm] 3 S +0.20 0 max.R3 20 +0.20 0 27.5 E: Solder terminals 22.5 mm E:Quick connect terminals 25.5 mm S: 1.0, 1.2, 1.5, 2.0, 2.5, 3.0 mm 2 Connectors 27.5 20 E 23 30 6100-4 Connectors (Inlets/Outlets) https://www.schurter.com /PG07 All Variants Type Protection Class Panel mounting Panel Thickness s [mm] Terminal 6100-4 I 6100-4 I 6100-4 I Order Number Snap-in 1 Quick connect terminals 4.8 x 0.8 mm 6100.4210 █ Snap-in 1.2 Quick connect terminals 4.8 x 0.8 mm 6100.4212 █ Snap-in 1.5 Quick connect terminals 4.8 x 0.8 mm 6100.4215 █ 6100-4 I Snap-in 1.6 Quick connect terminals 4.8 x 0.8 mm 6100.4216 6100-4 I Snap-in 2 Quick connect terminals 4.8 x 0.8 mm 6100.4220 6100-4 I Snap-in 2.5 Quick connect terminals 4.8 x 0.8 mm 6100.4225 █ 6100-4 I Snap-in 3 Quick connect terminals 4.8 x 0.8 mm 6100.4230 █ 6100-4 I Snap-in 1 Quick connect terminals 6.3 x 0.8 mm 6100.4310 █ 6100-4 I Snap-in 1.2 Quick connect terminals 6.3 x 0.8 mm 6100.4312 █ 6100-4 I Snap-in 1.5 Quick connect terminals 6.3 x 0.8 mm 6100.4315 █ 6100-4 I Snap-in 2 Quick connect terminals 6.3 x 0.8 mm 6100.4320 █ 6100-4 I Snap-in 2.5 Quick connect terminals 6.3 x 0.8 mm 6100.4325 █ 6100-4 I Snap-in 3 Quick connect terminals 6.3 x 0.8 mm 6100.4330 █ 6100-4 I Snap-in 1 Solder terminals 3.8 x 0.8 mm 6100.4110 █ 6100-4 I Snap-in 1.2 Solder terminals 3.8 x 0.8 mm 6100.4112 █ 6100-4 I Snap-in 1.5 Solder terminals 3.8 x 0.8 mm 6100.4115 █ 6100-4 I Snap-in 2 Solder terminals 3.8 x 0.8 mm 6100.4120 █ 6100-4 I Snap-in 2.5 Solder terminals 3.8 x 0.8 mm 6100.4125 █ 6100-4 I Snap-in 3 Solder terminals 3.8 x 0.8 mm 6100.4130 █ █ █ Most Popular. Availability for all products can be searched real-time:https://www.schurter.com/en/Stock-Check/Stock-Check-SCHURTER Articles for enhanced glow wire test requirements acc. IEC 60695-2-12 and -13 can be ordered with ending ".15" (xxxx.xxxx.15). They are suitable for the use in unattended household equipment acc. IEC 60335-1. Packaging unit   50 Pcs  Accessories Description Wire Harness Wire harness for SCHURTER products   Assorted Covers Rear Cover   0859.0048 4311.9401 4311.9402   RC320 Rear Cover for Power Entry Module   Connectors 3 6100-4 Connectors (Inlets/Outlets) https://www.schurter.com /PG07 Description Cord retaining kits Cord retaining strain relief   Countersunk, C 4700.0003   Mating Outlets/Connectors Category / Description Appliance Outlet Overview complete 4787, Mounting: Screw-on mounting, Appliance Outlet: IEC Solder terminals, 10 A, Suitable for appliances with protection class I 4787 4788, Mounting: Snap-in version, Appliance Outlet: IEC Solder / Quick Connect, 10 A, Suitable for appliances with protection class I 4788 IEC Appliance Outlet F or H, Screw-on Mounting, Front Side, Solder, PCB or Quick-connect Terminal 5091   Connector Overview complete 4782 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4782 4785 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4785 4300-06 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4300-06 4781 Mounting: Power Cord, Cable, Connector: IEC C15 4781 4784 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C15 4784 ... 05.01.2022   4 Connectors The specifications, descriptions and illustrations indicated in this document are based on current information. All content is subject to modifications and amendments. Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability and test each product selected for their own applications.