6100.4308

APPLIANCE COUPLERS Appliance inlets/-outlets 6100-3, 6100-4 6102-3, 6102-5 Appliance inlet Type 6100-3, 6102-3 Screw-on mounting from front or rear Solder terminals or Quick connect terminals Pin temperature 70 °C Protection classes I and II C 14 (6100) C 18 (6102) E: solder terminals E: quick connect terminals 70 °C 70 °C Mounting screw torque 0,5 Nm 50 75 20,5 mm 23,5 mm 100 Appliance inlet Type 6100-4, 6102-5 Snap-in mounting from front Solder terminals or Quick connect terminals Pin temperature 70 °C Protection classes I and II C 14 (6100) C 18 (6102) 70 °C 70 °C 50 75 E: solder terminals E: quick connect terminals S: 1,0; 1,2; 1,5; 2,0; 2,5; 3,0 mm 22,5 mm 25,5 mm 100 Technical data: Standards • • • • Protection class I IEC/EN 60320-1/C14 Rated current/voltage: 10 A/250 VAC Insulation resistance: > 10 MΩ (500 VDC, 1 Min.) Dielectric strength: 2 kV (50 Hz, 1 Min.), to accessible surfaces Material: – Socket: thermoplastic, black, UL 94V-0 Protection class II IEC/EN 60320-1/C18 Approvals SEV VDE VDE SEMKO UL CSA (10 A / 250 VAC) (10 A / 250 VAC / 6100-3/6102-3) (10 A / 250 VAC / 6100-4/6102-5) (10 A / 250 VAC) (15 A / 250 VAC) (15 A / 250 VAC) Order Numbers Screw-on mounting Protection class I Protection class II Snap-in mounting Protection class I Protection class II 6100.3100 6102.3100* 6100.41XX 6102.51XX Solder terminals 3,5 x 0,8 mm 6100.3200 6102.3200* 6100.42XX 6102.52XX Quick connect terminals 4,8 x 0,8 mm 6100.3300 6102.3300* 6100.43XX 6102.53XX Quick connect terminals 6,3 x 0,8 mm Rivet mount types available on request Therefore change the fifth digit in the order number from a “3” to a “9” (e.g. 6100.9300) “XX” panel thickness (s) in 1/10 mm 10, 12, 15, 20, 25, 30 e.g. 6100.4315 for 1,5 mm * Minimum order quantity for rivet mount types required Cord retaining clamp and insulation cover see page 169 152 www.schurterinc.com Terminals