6100-3
Connectors (Inlets/Outlets)
https://www.schurter.com /PG07
IEC Appliance Inlet C14, Screw-on Mounting, Front or Rear Side, Solder or Quick-connect Terminal
6100-3 with sealing kit IP54 to appliance
(without locking brackets)
IEC connector C14
Screw-on mounting
Solder or quick connect terminals
6100-3
6100-3 with sealing kit IP54
(including locking brackets)
C14
See below:
Approvals and Compliances
70° C
Description
- Panel mount :
Screw-on mounting from front or rear-side
- Appliance Inlet , Pin temperature 70 °C , Protection class I
- Variants with factory mounted inlet gasket and sealing kit for IP54 into
the equipement and the pluggable power supply
- Solder terminals or quick connect terminals
Other versions on request
- Types for rivet mounting available upon request
- Types for enhanced glow wire test requirements acc. IEC 60695-212 and -13 for the use in unattended household equipment acc. IEC
60335-1
References
Alternative: protection class II version 6102-3
Alternative: version with line filter 5110; 5120
Weblinks
pdf data sheet, html datasheet, General Product Information, Approvals,
Distributor-Stock-Check, Accessories, Detailed request for product
Technical Data
Ratings IEC
Ratings UL/CSA
Dielectric Strength
Allowable Operation Temperature
IP-Protection
Protection against electric
shock
Terminal
Panel Thickness S
Material: Housing
10 A / 250 VAC; 50 Hz
15 A / 250 VAC; 60 Hz
> 2 kVAC between L-N
> 2 kVAC between L/N-PE
(1 min/50 Hz)
-25 °C to 70 °C
Appliance inlet/-outlet
C14 acc. to IEC 60320-1,
UL 60320-1, CSA C22.2 no. 60320-1
(for cold conditions) pin-temperature 70
°C, 10 A, Protection Class I
from front side IP40 or IP54 with sealing
kit acc. to IEC 60529
Suitable for appliances with protection
class I acc. to IEC 61140
Solder terminals or quick connect terminals
Screw: max 8 mm, max 3 mm with
sealing kit
Mounting screw torque max 0.5 Nm
Thermoplastic, black, UL 94V-0
Approvals and Compliances
Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about
Approvals
SCHURTER products are designed for use in industrial environments. They have approvals from independent testing bodies according to national
and international standards. Products with specific characteristics and requirements such as required in the automotive sector according to IATF
16949, medical technology according to ISO 13485 or in the aerospace industry can be offered exclusively with customer-specific, individual agreements by SCHURTER.
Connectors
1
6100-3
Connectors (Inlets/Outlets)
https://www.schurter.com /PG07
Approvals
The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products.
Approval Reference Type: 6100
Approval Logo
Certificates
Certification Body
Description
VDE Approvals
VDE
Certificate Number: 40015595
UL Approvals
UL
UL File Number: E96454
CCC Approvals
CCC
CCC Certificate Number:
Design
Standard
Description
Designed according to
IEC 60320-1
Appliance couplers for household and similar general purposes
Designed according to
UL 60320-1
Standard for Attachment Plugs and Receptacles
Designed according to
CSA C22.2 no. 60320-1
General Use Receptacles, Attachment Plugs, and Similar Wiring Devices
Design
Standard
Description
Designed for applications acc.
IEC/UL 62368-1
IEC 62368-1 includes the basic requirements for safety of audio, video,
information technology and office equipment.
Designed for applications acc.
IEC 60335-1
Safety of electrical appliances for household and similar purposes. Meets
the requirements for appliances in unattended use. This includes the
enhanced requirements of glow wire tests acc. to IEC 60695-2-11 or -12
& -13.
Details
Initiator
Description
CE declaration of conformity
SCHURTER AG
The CE marking declares that the product complies with the applicable
requirements laid down in the harmonisation of Community legislation on
its affixing in accordance with EU Regulation 765/2008.
RoHS
SCHURTER AG
Directive RoHS 2011/65/EU, Amendment (EU) 2015/863
China RoHS
SCHURTER AG
The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March
2007. It is similar to the EU directive RoHS.
REACH
SCHURTER AG
On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration,
Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as
"REACH") entered into force.
White Paper Glow wire test
SCHURTER AG
Meets the requirements of IEC 60335-1 for appliances in unattended use.
This includes the enhanced requirements of glow wire tests acc. to IEC
60695-2-11 or -12 &-13.
Product standards
Product standards that are referenced
Organization
Application standards
Application standards where the product can be used
Organization
Compliances
The product complies with following Guide Lines
Identification
2
Connectors
6100-3
Connectors (Inlets/Outlets)
https://www.schurter.com /PG07
Dimensions [mm]
6.3x90°
2.5
19.5
20.5
23
3.5
28
E
27.5
5
40
48
E: Solder terminals 20.5 mm
E: Quick connect terminals 23.5 mm
max.R3
2)
21 +0.2
0
1)
Ø 3.5
20 +0.2
0
Ø 3.5 / M3
max.R3
28 +0.2
0
28.5 +0.2
0
40 ±0.2
40 ±0.2
1) mounting from front-side
2) mounting from rear-side
Assembly Instructions
6100-3 incl. sealing kit for IP54
Mating cordsets to sealing kit
5)
7)
4)
8)
6)
1)
2)
3)
Part no
Country plug
Cable length
Cross section
Color
6000.0214
6003.0215
6004.0215
6007.0212
6007.0214
6004.0114
6026.0215
6009.1315
6047.6414
6009.1214
6011.0215
6044.0215
open end
EURO plug
EURO plug
EURO plug
IEC plug
EURO plug
Italy
North America
Japan
North America
Switzerland
United Kingdom
2.0 m
2.5 m
2.5 m
1.0 m
2.0 m
2.0 m
2.5 m
2.5 m
2.0 m
2.0 m
2.5 m
2.5 m
3x1 mm2
3x1 mm2
3x1 mm2
3x1 mm2
3x1 mm2
3x0.75 mm2
3x1 mm2
3x18 AWG
3x0.75 mm2
3x18 AWG
3x1 mm2
3x1 mm2
black
black
black
black
black
black
black
black
black
black
black
black
Panel thickness max. 3 mm Tightening torque max. 0.1 Nm
1) Device plug 6100-3 with factory-fitted insertion seal
2) Flat gasket
3) Housing
4) Support bolt
5) Sealing ring
6) Spring washer
7) Nut
8) Locking bracket
Connectors
3
6100-3
Connectors (Inlets/Outlets)
https://www.schurter.com /PG07
All Variants
Type
Protection Class
Panel mounting
Sealing kit
Terminal
IP Protection Class
Front Side
6100-3
I
6100-3
I
6100-3
Order Number
Screw
-
Quick connect terminals 4.8 x 0.8 mm
IP40
6100.3200
Screw
with locking bracket
Quick connect terminals 4.8 x 0.8 mm
IP54
6100.3200.33
I
Screw
without locking bracket
Quick connect terminals 4.8 x 0.8 mm
IP54
6100.3200.32
█
6100-3
I
Screw
-
Quick connect terminals 6.3 x 0.8 mm
IP40
6100.3300
█
6100-3
I
Screw
with locking bracket
Quick connect terminals 6.3 x 0.8 mm
IP54
6100.3300.33
█
6100-3
I
Screw
without locking bracket
Quick connect terminals 6.3 x 0.8 mm
IP54
6100.3300.32
6100-3
I
Screw
-
Solder terminals 3.5 x 0.8 mm
IP40
6100.3100
6100-3
I
Screw
with locking bracket
Solder terminals 3.5 x 0.8 mm
IP54
6100.3100.33
6100-3
I
Screw
without locking bracket
Solder terminals 3.5 x 0.8 mm
IP54
6100.3100.32
█ Most Popular.
Availability for all products can be searched real-time:https://www.schurter.com/en/Stock-Check/Stock-Check-SCHURTER
The variants IP54 (6100.xxxx.33) include the inlet with factory mounted inlet gasket and the kit for IP protection to the equipment and for the power connector incl. a cord
retaining for a specific cord connector. Samples can be ordered with suffix ".H" (e.g. 6100.3100.33.H).
Articles for enhanced glow wire test requirements acc. IEC 60695-2-12 and -13 can be ordered on request. They are suitable for the use in unattended household equipment
acc. IEC 60335-1.
Packaging unit
50 Pcs
Accessories
Description
Wire Harness
Wire harness for SCHURTER products
Assorted Covers
Rear Cover
0859.0048
4311.9401
4311.9402
RC320
Rear Cover for Power Entry Module
Cord retaining kits
Cord retaining strain relief
Flat head, A
4
Connectors
4700.0001
█
█
█
6100-3
Connectors (Inlets/Outlets)
https://www.schurter.com /PG07
Mating Outlets/Connectors
Category / Description
Appliance Outlet Overview complete
4787, Mounting: Screw-on mounting, Appliance Outlet: IEC Solder terminals, 10 A, Suitable for appliances with protection class I
4787
4788, Mounting: Snap-in version, Appliance Outlet: IEC Solder terminals or quick connect terminals, 10 A, Suitable for
appliances with protection class I
4788
IEC Appliance Outlet F or H, Screw-on Mounting, Front Side, Solder, PCB or Quick-connect Terminal
5091
Appliance Outlet further types to 6100-3
Connector Overview complete
4782
4785 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13
4785
4012 Mounting: Power Supply Cord, 3 x 1 mm², Screw clamps, Connector: IEC C13
4012
4300-06 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13
4300-06
4781 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C15
4781
Connector further types to 6100-3
...
15.10.2020
4782 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13
The specifications, descriptions and illustrations indicated in this document are based on current
information. All content is subject to modifications and amendments. Information furnished is believed
to be accurate and reliable. However, users should independently evaluate the suitability and test each
product selected for their own applications.
Connectors
5
