6135
Power entry modules without line filter
https://www.schurter.com /PG05
IEC Appliance Inlet C14 with Circuit Breaker TA35 2-pole
Rocker green
illuminated
Rocker white
Non-illuminated
Rocker black
Non-illuminated
C14
See below:
Approvals and Compliances
70° C
Description
- Panel mount :
Snap-in version front side
- 2 Functions :
Appliance Inlet , Protection class I , Circuit breaker type TA35 , 2-pole
- Quick connect terminal 6.3 x 0.8 mm
Characteristics
- Unwired
- Switch non-illuminated or illuminated
- Suitable for use in equipment according to IEC/UL 62368-1
Other versions on request
- Pre-wired version
- Quick connect terminals 4.8 x 0.8 mm
- Protection class II, 70°C
References
Alternative: version for 16 A (20 A)
Component: circuit breakers TA36 Rocker; TA35 Rocker 2Pole
Substitute for type 7764
We recommend for new applications the type DG11
Weblinks
pdf data sheet, html datasheet, General Product Information, Approvals,
Distributor-Stock-Check, Accessories, Detailed request for product
Newly available variants corresponding to V-Lock mating cordset. The connector is equipped with a notch intended for use with the latching cordset.
The cord latching system prevents against accidental removal of the cordset.
Technical Data
Ratings IEC
Ratings UL/CSA
Dielectric Strength
Allowable Operation Temperature
IP-Protection
Protection against electric
shock
Terminal
Panel Thickness S
Material: Housing
10 A / 250 VAC; 50 Hz
15 A / 250 VAC; 60 Hz
> 2.5 kVAC between L-N
> 3 kVAC between L/N-PE
(1 min/50 Hz)
-25 °C to 60 °C
front side IP40 acc. to IEC 60529
Suitable for appliances with protection
class I acc. to IEC 61140
Quick connect terminals 6.3 x 0.8 mm
Snap-in1.5/2/2.5 mm
Thermoplastic, black, UL 94V-0
Appliance inlet/-outlet
Circuit Breakers
C14 acc. to IEC 60320-1
UL 60320-1, CSA C22.2 no. 60320-1
(for cold conditions) pin-temperature 70
°C, 10 A, Protection Class I
Acc. IEC/EN 60934, UL 1077, CSA
22.2 no. 235
2-pole rocker switch, illuminated or nonilluminated.
Conditional short circuit Inc:
2000 A
Approvals and Compliances
Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about
Approvals
SCHURTER products are designed for use in industrial environments. They have approvals from independent testing bodies according to national
and international standards. Products with specific characteristics and requirements such as required in the automotive sector according to IATF
16949, medical technology according to ISO 13485 or in the aerospace industry can be offered exclusively with customer-specific, individual agreements by SCHURTER.
Connectors
1
6135
Power entry modules without line filter
https://www.schurter.com /PG05
Approvals
The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products.
Approval Reference Type: 6135
Approval Logo
Certificates
Certification Body
Description
VDE Approvals
VDE
Certificate Number: 40023066
UL Approvals
UL
UR File Number: E96454
CCC Approvals
CCC
CCC Certificate Number: 2020180204013718
Design
Standard
Description
Designed according to
IEC 60320-1
Appliance couplers for household and similar general purposes
Designed according to
UL 60320-1
Standard for Attachment Plugs and Receptacles
Designed according to
CSA C22.2 no. 60320-1
General Use Receptacles, Attachment Plugs, and Similar Wiring Devices
Design
Standard
Description
Suitable for applications acc.
IEC/UL 62368-1
Audio/video, information and communication technology equipment - Part
1: Safety requirements
Details
Initiator
Description
CE declaration of conformity
SCHURTER AG
The CE marking declares that the product complies with the applicable
requirements laid down in the harmonisation of Community legislation on
its affixing in accordance with EU Regulation 765/2008.
UKCA declaration of conformity
SCHURTER AG
The UKCA marking declares that the product complies with the applicable
requirements laid down in the British Amendment of Regulation (EC)
765/2008.
RoHS
SCHURTER AG
Directive RoHS 2011/65/EU, Amendment (EU) 2015/863
China RoHS
SCHURTER AG
The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March
2007. It is similar to the EU directive RoHS.
REACH
SCHURTER AG
On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration,
Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as
"REACH") entered into force.
SCHURTER AG
V-Lock system are based on a matching plug-dose combination. The
connector is equipped with a notch intended for use with the latching
cordset. The cord latching system prevents against accidental removal of
the cordset.
Product standards
Product standards that are referenced
Organization
Application standards
Application standards where the product can be used
Organization
Compliances
The product complies with following Guide Lines
Identification
2
Connectors
6135
Power entry modules without line filter
https://www.schurter.com /PG05
Dimensions [mm]
10.6
31.8
+0.20
0
+0.20
0
59
65.3
27.4
3.2
58.8 x 27.2
30
6
max. R 0.2
S ± 0.05
R3
28.4
Diagrams
L
L' P1
2)
PE
PE'
TA35
1)
N
N' P2
1) Line
2) Load
Effect of ambient temperature
The units are calibrated for an ambient temperature of +23°C. To determine the rated current for a lower or higher ambient temperature, use a correction factor (typical value) from
the table below:
Ambient Temperature [°C]
Correction factor
-10
0.89
-5
0.91
0
0.92
+23
1.00
+30
1.03
+40
1.08
+55
1.16
Example: Rated current at +23°C 10 A, Ambient temperature +60°C, Correction factor
1.06, Chosen rated current at +60°C, ambient temperature: 10 A x 1.06 = 10.6 A
Connectors
3
6135
Power entry modules without line filter
https://www.schurter.com /PG05
Time-Current-Curves
Tripping Characteristics In ≥ 3 ... ≤ 15 A
Tripping Characteristics In < 3 A
[ min ] [ sec ]
10'000
60
30
20
10
[ min ] [ sec ]
10'000
Typ
p
TA35
3–15A (TC-1, TC-2)
+23 °C
5
200
1
Typ
Nennstrom
Umgebungstemp.
60
Connectors
2
3
4
5
8
10
6135
Power entry modules without line filter
https://www.schurter.com /PG05
Order number key
Configuration code TA35
Typ
Konfigurationscode TA35
6135 - C B D W F 1 2 0 C 0 - 000-C6135-1112-100
Rated current In (A)
No other
features
In
Code
In
Code
1,0
2,0
4,0
5,0
6,0
J10
J20
040
050
060
8,0
10,0
12,0
15,0
080
100
120*
150*
*) UL / CSA only
Other rated currents on request
Rocker legend
0
K
printed
L
printed
l
M printed
OFF OFF
printed
white
0
l
H
Colour of print
white
0
embossed
l
F
ON
Illustration
ON
Surface
black
Position of the rocker legend e.g. F
black
Other legends on request
Colours
Switch front
W
B
3
4
6
Rocker
black
black
black
black
black
non-illuminated
illuminated
white
black
–
–
–
–
–
red transparent
green transparent
orange transparent
Other colours on request
Number of switched poles
Number of protected poles
Switch
without
illumination
Switch
illuminated
240 V
120 V
2-pole
1
2
LINE
LINE
LOAD
LOAD
CBT
CBD
C12
C14
C32
C34
Other versions on request
Connectors
5
6135
Power entry modules without line filter
https://www.schurter.com /PG05
Configuration code (Order example)
Typ
Konfigurationscode TA35
6135 - C B D W F 1 2 0 C 0 - 000-C6135-1112-100
Locking system
0 Without
1 V-Lock
Mounting
1 Snap-in s = 1.0 mm
2 Snap-in s = 1.5 mm
3 Snap-in s = 2.0 mm
4 Snap-in s = 2.5 mm
5 Snap-in s = 3.0 mm
Terminal PE
0 Without (PCII)
1 Quick connect 6.3 x 0.8 mm
1)
2)
Terminal N
1 Quick connect 6.3 x 0.8 mm
4 Connection
Terminal L
1 Quick connect 6.3 x 0.8 mm
4 Connection
1) Only on request
2) Only on request- no approvals available
0 Protection class 1
6
Connectors
6135
Power entry modules without line filter
https://www.schurter.com /PG05
Packaging unit
40 Pcs
Accessories
Description
Assorted_Covers
Rear Cover
0859.0074
RC320
Rear Cover for Power Entry Module
Cord_retaining_kits
Cord retaining strain relief
Flat head, A
4700.0001
Mating Outlets/Connectors
Category / Description
Appliance Outlet Overview complete
4787, Mounting: Screw-on mounting, Appliance Outlet: IEC Solder terminals, 10 A, Suitable for appliances with protection class I
4787
4788, Mounting: Snap-in version, Appliance Outlet: IEC Solder / Quick Connect, 10 A, Suitable for appliances with
protection class I
4788
Connector Overview complete
4782 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13
4782
4785 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13
4785
4300-06 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13
4300-06
4781 Mounting: Power Cord, Cable, Connector: IEC C15
4781
4784 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C15
4784
Connectors
7
6135
Power entry modules without line filter
https://www.schurter.com /PG05
Mating Outlets/Connectors shuttered
Connector Overview complete
4783 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13
4783
Power Cord Overview complete
VAC13KS, Overview, V-Lock cord retaining, diverse Connector IEC C13, diverse, black
VAC13KS
11.08.2023
8
Connectors
The specifications, descriptions and illustrations indicated in this document are based on current
information. All content is subject to modifications and amendments. Information furnished is believed
to be accurate and reliable. However, users should independently evaluate the suitability and test each
product selected for their own applications.
