6162.0054

6061 Connectors (Inlets/Outlets) https://www.schurter.com /PG07 IEC Appliance Inlet C14/C18, Screw-on Mounting, Front Side, Solder or Quick-connect, Screw Terminal C14 C18 See below: Approvals and Compliances 70° C 70° C Description - Panel mount : Screw-on mounting , Front Side - 1 Function - Appliance Inlet , Pin temperature 70 °C , protection class I or II - Solder / Quick Connect / Screw Terminals Other versions on request - Variant with notch for V-Lock mating Cordsets - PCB terminals Weblinks pdf data sheet, html datasheet, General Product Information, Approvals, Distributor-Stock-Check, Accessories, Detailed request for product Newly available variants corresponding to V-Lock mating cordset. The connector is equipped with a notch intended for use with the latching cordset. The cord latching system prevents against accidental removal of the cordset. Technical Data   Ratings IEC Ratings UL/CSA Dielectric Strength Allowable Operation Temperature IP-Protection Protection against electric shock Material: Housing 10 A / 250 VAC; 50 Hz 15 A / 250 VAC; 60 Hz > 3 kVAC between L-N > 1.5 kVAC between L/N-PE (1 min/50 Hz) -25 °C to 70 °C Appliance inlet/-outlet C14 / C18 acc. to IEC 60320-1 UL 60320-1, CSA C22.2 no. 60320-1 (for cold conditions) pin-temperature 70 °C, 10 A, Protection Class I or II front side IP20 acc. to IEC 60529 Suitable for appliances with protection class I or II acc. to IEC 61140 PA6, black / grey / white, UL 94V-0 Approvals and Compliances Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in  Details about Approvals SCHURTER products are designed for use in industrial environments. They have approvals from independent testing bodies according to national and international standards. Products with specific characteristics and requirements such as required in the automotive sector according to IATF 16949, medical technology according to ISO 13485 or in the aerospace industry can be offered exclusively with customer-specific, individual agreements by SCHURTER. Approvals The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products. Approval Reference Type: 6061 Approval Logo Certificates Certification Body Description VDE Approvals VDE Certificate Number: 40011871 UL Approvals UL UL File Number: E96454 Connectors 1 6061 Connectors (Inlets/Outlets) https://www.schurter.com /PG07 Product standards Product standards that are referenced Organization Design Standard Description Designed according to IEC 60320-1 Appliance couplers for household and similar general purposes Designed according to UL 60320-1 Standard for Attachment Plugs and Receptacles Designed according to CSA C22.2 no. 60320-1 General Use Receptacles, Attachment Plugs, and Similar Wiring Devices Design Standard Description Designed for applications acc. IEC/UL 62368-1 Audio/video, information and communication technology equipment - Part 1: Safety requirements Details Initiator Description CE declaration of conformity SCHURTER AG The CE marking declares that the product complies with the applicable requirements laid down in the harmonisation of Community legislation on its affixing in accordance with EU Regulation 765/2008. UKCA declaration of conformity SCHURTER AG The UKCA marking declares that the product complies with the applicable requirements laid down in the British Amendment of Regulation (EC) 765/2008. RoHS SCHURTER AG Directive RoHS 2011/65/EU, Amendment (EU) 2015/863 China RoHS SCHURTER AG The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March 2007. It is similar to the EU directive RoHS. REACH SCHURTER AG On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration, Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as "REACH") entered into force. SCHURTER AG V-Lock system are based on a matching plug-dose combination. The connector is equipped with a notch intended for use with the latching cordset. The cord latching system prevents against accidental removal of the cordset. Application standards Application standards where the product can be used Organization Compliances The product complies with following Guide Lines Identification 2 Connectors 6061 Connectors (Inlets/Outlets) https://www.schurter.com /PG07 Dimensions [mm] Countersunk mounting holes, 40 mm distance, quick connect and solder terminals 50 E 5 40 R 19.5 - 0 +0.20 ø 3.5/M3 19.3 22.5 ø 3. 2 max. R 4 7 +0.20 s= 40 27.3 - 0 2 27 E: Quick-connect terminals 4.8x0.8 mm: 25.3 mm E: Quick-connect terminals 6.3x0.8 mm: 26.3 mm E: Solder terminals short: 21.1 mm E: Solder terminals long: 24.5 mm  V-Lock version, countersunk mounting holes, 40 mm distance, quick connect and solder terminals 50 E 6 40 R 5 s= 40 V-Lock +0.20 19.9 - 0 23 19.7 ø 3.5/M3 ø 3. 2 max. R 3 +0.20 27.6 - 0 3 27.3 E: Quick-connect terminals 4.8x0.8 mm: 23.8 mm E: Quick-connect terminals 6.3x0.8 mm: 24.8 mm E: Solder terminals short: 19.6 mm E: Solder terminals long: 23.0 mm  Connectors 3 6061 Connectors (Inlets/Outlets) https://www.schurter.com /PG07 Through hole mounting holes, 40 mm distance, quick connect and solder terminals 50 E 5 40 R 19.5 - 0 +0.20 ø 3.5/M3 19.3 22.5 ø 3. 2 max. R 4 6 +0.20 s= 40 27.3 - 0 2 27 E: Quick-connect terminals 4.8x0.8 mm: 26.1 mm E: Quick-connect terminals 6.3x0.8 mm: 27.1 mm E: Solder terminals short: 21.9 mm E: Solder terminals long: 25.3 mm  Countersunk mounting holes, 36 mm distance, quick connect and solder terminals 48 E 5 36 +0.20 19.5 - 0 R 6 +0.20 s= 36 27.3 - 0 2 27 E: Quick-connect terminals 4.8x0.8 mm: 26.1 mm E: Quick-connect terminals 6.3x0.8 mm: 27.1 mm E: Solder terminals short: 21.9 mm E: Solder terminals long: 25.3 mm  4 ø 3.5/M3 19.3 22.5 ø 3. 2 max. R 4 Connectors 6061 Connectors (Inlets/Outlets) https://www.schurter.com /PG07 Countersunk mounting holes, 40 mm distance, screw terminals 50 20.3 5 40 R +0.20 19.3 - 0 23 19 ø 3.5/M3 ø 3. 2 max. R 4 7 +0.20 s= 40 27.3 - 0 2 27 Protection class II, countersunk mounting holes, 40 mm distance, quick connect and solder terminals 50 E 6 40 R 5 s= 40 V-Lock +0.20 19.9 - 0 23 19.7 ø 3.5/M3 ø 3. 2 max. R 3 +0.20 27.6 - 0 3 27.3 E: Quick-connect terminals 4.8x0.8 mm: 23.8 mm E: Quick-connect terminals 6.3x0.8 mm: 24.8 mm E: Solder terminals short: 19.3 mm E: Solder terminals long: 23.0 mm Config. Code 6061|-|H|-|A|B|C|0-|D|-|E|G|O|  The characters are placeholders for the correspondingly keys of selections from the key tables. Connectors 5 6061 Connectors (Inlets/Outlets) https://www.schurter.com /PG07 6061|-| H |-|A|B|C|0-|D|-|E|G|O| = Type Terminal Ground Type Configuration key protection class II B protection class I X Protection class II only with V-Lock 6061|-|H|-| A |B|C|0-|D|-|E|G|O| = Terminals Terminal L Configuration key Configuration key without terminal 0 Solder terminal (L = 5.0mm) large soldering hole 1 short solder terminal (L = 4.8 mm) 2 long solder terminal (L = 8.5 mm) 3 Blade terminal (4.8 x 0.8 mm) 8 Blade terminal (6.3 x 0.8 mm) 9 screw terminal A Symbols similar as in table A 6061|-|H|-|A|B|C|0-| D |-|E|G|O| = Color Solder terminal (L = 5.0mm) large soldering hole 1 Color   short solder terminal (L = 4.8 mm) 2   long solder terminal (L = 8.5 mm) Configuration key Black A Grey B White D 3   Blade terminal (4.8 x 0.8 mm) 8   Blade terminal (6.3 x 0.8 mm) Style 9   screw terminal 6061|-|H|-|A|B|C|0-|D|-| E |G|O| = Style A 6061|-|H|-|A| B |C|0-|D|-|E|G|O| = Terminals Configuration key flange with countersunk holes 1 flange with through holes 2 6061|-|H|-|A|B|C|0-|D|-|E| G |O| = Dimension S Dimension "S" Terminal N Configuration key 36 Solder terminal (L = 5.0mm) large soldering hole 1 40 short solder terminal (L = 4.8 mm) 2 long solder terminal (L = 8.5 mm) 3 Blade terminal (4.8 x 0.8 mm) 8 Blade terminal (6.3 x 0.8 mm) 9 screw terminal A Configuration key The dimension "S" is displayed in (1/10 mm). This information is also valid for the order code 6061|-|H|-|A|B|C|0-|D|-|E|G| O | = Features Features Configuration key Symbols similar as in table A without V-Lock 6061|-|H|-|A|B| C |0-|D|-|E|G|O| = Terminals 0 V-Lock V V-Lock only with Dimension "X" = 40 All Variants Type Terminals L / N Terminal Ground Color Style Hole distance s [mm] Features Config. Code Order Number Protection class I short solder terminal short solder terminal (L = 4.8 mm) (L = 4.8 mm) black Flange with countersunk holes 36 - 6061-X-2220-A-1360 6162.0045 Protection class I short solder terminal short solder terminal (L = 4.8 mm) (L = 4.8 mm) black Flange with countersunk holes 40 - 6061-X-2220-A-1400 6162.0046 Protection class I short solder terminal short solder terminal (L = 4.8 mm) (L = 4.8 mm) black Flange with through holes 40 - 6061-X-2220-A-2400 6162.0047 Protection class I short solder terminal short solder terminal (L = 4.8 mm) (L = 4.8 mm) grey Flange with countersunk holes 40 - 6061-X-2220-B-1400 6162.0048 Protection class I long solder terminal (L = 8.5 mm) long solder terminal (L = 8.5 mm) black Flange with countersunk holes 36 - 6061-X-3330-A-1360 6162.0049 Protection class I long solder terminal (L = 8.5 mm) long solder terminal (L = 8.5 mm) black Flange with countersunk holes 40 - 6061-X-3330-A-1400 6162.0050 Protection class I long solder terminal (L = 8.5 mm) long solder terminal (L = 8.5 mm) grey Flange with countersunk holes 40 - 6061-X-3330-B-1400 6162.0052 Protection class I Blade terminal (4.8 x Blade terminal (4.8 x 0.8 mm) 0.8 mm) black Flange with countersunk holes 36 - 6061-X-8880-A-1360 6162.0054 Protection class I Blade terminal (4.8 x Blade terminal (4.8 x 0.8 mm) 0.8 mm) black Flange with countersunk holes 40 - 6061-X-8880-A-1400 6162.0055 6 Connectors █ 6061 Connectors (Inlets/Outlets) https://www.schurter.com /PG07 Type Terminals L / N Terminal Ground Color Style Hole distance s [mm] Features Config. Code Order Number Protection class I Blade terminal (6.3 x Blade terminal (6.3 x 0.8 mm) 0.8 mm) black Flange with countersunk holes 36 - 6061-X-9990-A-1360 6162.0057 █ Protection class I Blade terminal (6.3 x Blade terminal (6.3 x 0.8 mm) 0.8 mm) black Flange with countersunk holes 40 - 6061-X-9990-A-1400 6162.0058 █ Protection class I Blade terminal (6.3 x Blade terminal (6.3 x 0.8 mm) 0.8 mm) grey Flange with countersunk holes 40 - 6061-X-9990-B-1400 6162.0059 black Flange with countersunk holes 40 - 6061-X-AAA0-A-1400 6162.0061 █ Protection class I Screw terminal Screw terminal Protection class I short solder terminal short solder terminal (L = 4.8 mm) (L = 4.8 mm) black Flange with countersunk holes 40 V-Lock 6061-X-2220-A-140V 6162.0157 █ Protection class I Blade terminal (4.8 x Blade terminal (4.8 x 0.8 mm) 0.8 mm) black Flange with countersunk holes 40 V-Lock 6061-X-8880-A-140V 6162.0158 █ Protection class I Blade terminal (6.3 x Blade terminal (6.3 x 0.8 mm) 0.8 mm) black Flange with countersunk holes 40 V-Lock 6061-X-9990-A-140V 6162.0159 █ Protection class II Blade terminal (6.3 x Blade terminal (6.3 x 0.8 mm) 0.8 mm) black Flange with countersunk holes 40 V-Lock 6061-B-9900-A-140V 6162.0175 The listed variants should be available from stock. Other versions on request www.schurter.com/contact █ Most Popular. Availability for all products can be searched real-time:https://www.schurter.com/en/Stock-Check/Stock-Check-SCHURTER Packaging unit   50 Pcs  Accessories Description Assorted Covers Rear Cover   RC320 Rear Cover for Power Entry Module   Mating Outlets/Connectors Category / Description Appliance Outlet Overview complete 4787, Mounting: Screw-on mounting, Appliance Outlet: IEC Solder terminals, 10 A, Suitable for appliances with protection class I 4787 4788, Mounting: Snap-in version, Appliance Outlet: IEC Solder / Quick Connect, 10 A, Suitable for appliances with protection class I 4788 IEC Appliance Outlet F or H, Screw-on Mounting, Front Side, Solder, PCB or Quick-connect Terminal 5091   Connectors 7 6061 Connectors (Inlets/Outlets) https://www.schurter.com /PG07 Connector Overview complete 4782 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4782 4785 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4785 4300-06 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4300-06 4781 Mounting: Power Cord, Cable, Connector: IEC C15 4781 4784 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C15 4784 ...   Mating Outlets/Connectors shuttered Connector Overview complete 4783 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4783   Power Cord Overview complete VAC13KS, Overview, V-Lock cord retaining, diverse Connector IEC C13, diverse, black VAC13KS VAC17KS, V-Lock cord retaining, diverse m, Connector IEC C17, diverse, black / grey / white VAC17KS 05.01.2022   8 Connectors The specifications, descriptions and illustrations indicated in this document are based on current information. All content is subject to modifications and amendments. Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability and test each product selected for their own applications.