6250.5520

6250 / 6255 Power entry modules without line filter https://www.schurter.com /PG05 IEC Appliance Inlet C14 with Fuseholder 1- or 2-pole, mates to Felcom C14 See below: Approvals and Compliances 70° C Description - Component : Snap-in version front side - 2 Functions : Appliance Inlet Protection class I , Fuseholder for fuse-links 5 x 20 mm 1‑ or 2‑pole - Meets the requirements of IEC 60335-1 for appliances in unattended use. This includes the enhanced requirements of glow wire tests acc. to IEC 60695-2-11 or -12 &-13. - For PCB mounting , fits to Felcom Technical Data Characteristics - Individual components soldered on a printed circuit board - Plug removal necessary for fuse-link replacement - Suitable for use in equipment according to IEC/UL 62368-1 Weblinks pdf data sheet, html datasheet, General Product Information, Approvals, Distributor-Stock-Check, Accessories, Detailed request for product   Ratings IEC Ratings UL/CSA Allowable Operation Temperature IP-Protection Protection against electric shock Terminal Panel Thickness S Material: Housing 10 A / 250 VAC; 50 Hz 10 A / 250 VAC; 60 Hz -25 °C to 70 °C Appliance inlet/-outlet front side IP40 acc. to IEC 60529 Suitable for appliances with protection class I acc. to IEC 61140 For PCB mounting Snap-in: 1/1.2/1.5/2/2.5/3 mm Thermoplastic, black, UL 94V-0 Fuseholder Rated Power Acceptance @ Ta 23 °C Power Acceptance @ Ta > 23°C C14 acc. to IEC 60320-1, UL 60320-1, CSA C22.2 no. 60320-1 (for cold conditions) pin-temperature 70 °C, 10 A, Protection Class I 1-/2-pole, Shocksafe category PC2 acc. to IEC 60127-6, UL 498, for fuse-links 5 x 20 mm 5 x 20: 2 W (1 pole)/ 1.6 W (2-pole) per pole Admissible power acceptance at higher ambient temperature see derating curves Approvals and Compliances Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in  Details about Approvals SCHURTER products are designed for use in industrial environments. They have approvals from independent testing bodies according to national and international standards. Products with specific characteristics and requirements such as required in the automotive sector according to IATF 16949, medical technology according to ISO 13485 or in the aerospace industry can be offered exclusively with customer-specific, individual agreements by SCHURTER. Approvals The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products. Approval Reference Type: 6250 / 6255 Approval Logo Certificates Certification Body Description VDE Approvals VDE Certificate Number: 40046421 UL Approvals UL UR File Number: E93617 CCC Approvals CCC CCC Certificate Number: 2018180204007242 Connectors 1 6250 / 6255 Power entry modules without line filter https://www.schurter.com /PG05 Product standards Product standards that are referenced Organization Design Standard Description Designed according to IEC 60320-1 Appliance couplers for household and similar general purposes Designed according to IEC 60127-6 Miniature fuses. Part 6. Fuse-holders for miniature fuse-links Designed according to IEC 61058-1 Switches for appliances. Part 1. General requirements Designed according to UL 60320-1 Standard for Attachment Plugs and Receptacles Designed according to CSA C22.2 no. 60320-1 General Use Receptacles, Attachment Plugs, and Similar Wiring Devices Design Standard Description Suitable for applications acc. IEC/UL 62368-1 Audio/video, information and communication technology equipment - Part 1: Safety requirements Suitable for applications acc. IEC 60601-1 Medical electrical equipment - Part 1: General requirements for basic safety and essential performance Suitable for applications acc. IEC 60335-1 Safety of electrical appliances for household and similar purposes. Meets the requirements for appliances in unattended use. This includes the enhanced requirements of glow wire tests acc. to IEC 60695-2-11 or -12 & -13. Details Initiator Description CE declaration of conformity SCHURTER AG The CE marking declares that the product complies with the applicable requirements laid down in the harmonisation of Community legislation on its affixing in accordance with EU Regulation 765/2008. UKCA declaration of conformity SCHURTER AG The UKCA marking declares that the product complies with the applicable requirements laid down in the British Amendment of Regulation (EC) 765/2008. RoHS SCHURTER AG Directive RoHS 2011/65/EU, Amendment (EU) 2015/863 China RoHS SCHURTER AG The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March 2007. It is similar to the EU directive RoHS. REACH SCHURTER AG On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration, Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as "REACH") entered into force. White Paper Glow wire test SCHURTER AG Meets the requirements of IEC 60335-1 for appliances in unattended use. This includes the enhanced requirements of glow wire tests acc. to IEC 60695-2-11 or -12 &-13. Medical Equipment SCHURTER AG Suitable for use in medical equipment according to IEC/UL 60601-1 (1 MOOP, 1 MOPP) Application standards Application standards where the product can be used Organization Compliances The product complies with following Guide Lines Identification Dimensions [mm] Appliance inlet with fuseholder 15.75 17.25 31.5 33 3.6 18 21.6 3 9 Connectors 12.7 4 +0.2 0 27.6 7.6 1.5 0.6 31.5 0.8 Appliance inlet with fuseholder 2 8 0.8x1.4 22.5 14 30 27.5 4.8 6.4 S ±0.1 2.5 +0.2 0 6250 / 6255 Power entry modules without line filter https://www.schurter.com /PG05 Derating Curves 2-pole 1-pole 1.4 1.2 1.0 I = 1.0 In 0.8 I = 0.7 In 0.6 I =