6432.0251.20

Felcom 64 Power entry modules without line filter https://www.schurter.com /PG05 IEC Appliance Inlet C14 with modular extended Components IEC C14 device plug with modular expandable components Snap-in version from front side C14 IEC C14 device plug with modular expandable components Snap-in version from front side IEC C14 device plug with modular expandable components Snap-in version from front side F See below: Approvals and Compliances 70° C 70° C Description - Panel mount : Snap-in version , front side - 2 - 5 Functions : Appliance Inlet , Protection class I , Outlet , Line Switch 2-pole , Fuseholder for fuse-links 5 x 20 mm 1‑ or 2‑pole , Solder terminals 3.5 x 0.8 mm / quick connect terminals 6.3 x 0.8 mm Characteristics - Modular component selection - Individual components soldered on a printed circuit board - Plug removal necessary for fuse-link replacement - Fully insulated from the rear - Suitable for use in equipment according to IEC/UL 62368-1 Other versions on request - Line switch with other rocker marking References Alternative: version with line filter   Felcom 54  Weblinks pdf data sheet, html datasheet, General Product Information, Approvals, Distributor-Stock-Check, Accessories, Detailed request for product Technical Data Ratings IEC Ratings UL/CSA Allowable Operation Temperature IP-Protection Protection against electric shock Terminal Panel Thickness S Material: Housing   10 A / 250 VAC; 50 Hz 10 A / 250 VAC; 60 Hz 15 A / 250 VAC 60 Hz without fuse holder  -25 °C to 70 °C front side IP40 acc. to IEC 60529 Suitable for appliances with protection class I acc. to IEC 61140 Solder terminals 3.5 x 0.8 mm / quick connect terminals 6.3 x 0.8 mm , tinplated Snap-in: 1/1.2/1.5/2/2.5/3 mm Thermoplastic, black, UL 94V-0 Appliance inlet/-outlet Fuseholder Rated Power Acceptance @ Ta 23 °C Power Acceptance @ Ta > 23°C Line Switch C14 acc. to IEC 60320-1 and␣ F acc. to UL 60320-1, CSA C22.2 no. 60320-1 (for cold conditions) pin-temperature 70 °C, 10 A, Protection Class I 1-/2-pole, Shocksafe category PC2 acc. to IEC 60127-6, for fuse-links 5 x 20 mm 5 x 20: 2 W (1 pole)/ 1.6 W (2-pole) per pole Admissible power acceptance at higher ambient temperature see derating curves Rocker switch 2-pole, non-illuminated, IEC 61058-1 Technical Details Approvals and Compliances Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in  Details about Approvals SCHURTER products are designed for use in industrial environments. They have approvals from independent testing bodies according to national and international standards. Products with specific characteristics and requirements such as required in the automotive sector according to IATF 16949, medical technology according to ISO 13485 or in the aerospace industry can be offered exclusively with customer-specific, individual agreements by SCHURTER. Connectors 1 Felcom 64 Power entry modules without line filter https://www.schurter.com /PG05 Approvals The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products. Approval Reference Type: Felcom 64 Approval Logo Certificates Certification Body Description VDE Approvals VDE Certificate Number: 40028094 UL Approvals UL UR File Number: E93617 Design Standard Description Designed according to IEC 60320-1 Appliance couplers for household and similar general purposes Designed according to IEC 60127-6 Miniature fuses. Part 6. Fuse-holders for miniature fuse-links Designed according to IEC 61058-1 Switches for appliances. Part 1. General requirements Designed according to UL 60320-1 Standard for Attachment Plugs and Receptacles Designed according to CSA C22.2 no. 60320-1 General Use Receptacles, Attachment Plugs, and Similar Wiring Devices Design Standard Description Suitable for applications acc. IEC/UL 62368-1 Audio/video, information and communication technology equipment - Part 1: Safety requirements Suitable for applications acc. IEC 60601-1 Medical electrical equipment - Part 1: General requirements for basic safety and essential performance Suitable for applications acc. IEC 60335-1 Safety of electrical appliances for household and similar purposes. Meets the requirements for appliances in unattended use. This includes the enhanced requirements of glow wire tests acc. to IEC 60695-2-11 or -12 & -13. Details Initiator Description CE declaration of conformity SCHURTER AG The CE marking declares that the product complies with the applicable requirements laid down in the harmonisation of Community legislation on its affixing in accordance with EU Regulation 765/2008. UKCA declaration of conformity SCHURTER AG The UKCA marking declares that the product complies with the applicable requirements laid down in the British Amendment of Regulation (EC) 765/2008. RoHS SCHURTER AG Directive RoHS 2011/65/EU, Amendment (EU) 2015/863 China RoHS SCHURTER AG The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March 2007. It is similar to the EU directive RoHS. REACH SCHURTER AG On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration, Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as "REACH") entered into force. White Paper Glow wire test SCHURTER AG Meets the requirements of IEC 60335-1 for appliances in unattended use. This includes the enhanced requirements of glow wire tests acc. to IEC 60695-2-11 or -12 &-13. Medical Equipment SCHURTER AG Suitable for use in medical equipment according to IEC/UL 60601-1 (1 MOOP, 1 MOPP) Product standards Product standards that are referenced Organization Application standards Application standards where the product can be used Organization Compliances The product complies with following Guide Lines Identification 2 Connectors Felcom 64 Power entry modules without line filter https://www.schurter.com /PG05 Dimensions [mm] 58.4 1) 65.5 1) 10 Variants 6423.0X5X.XX Mounting hole: 65.5+0,2 x 27.6+0,2 A: Quick-connect terminal 6.3x0.8 mm: 18.15 mm A: Solder terminal 3.5x0.8 mm: 13.35 mm 80.1 1) A Variants 6431.005X.XX Mounting hole: 80.1 0/+0.2 x 27.6 0/+0.2 A: Quick-connect terminal 6.3x0.8 mm: 18.1 mm A: Solder terminal 3.5x0.8 mm: 13.3 mm S: Panel thickness 1) In an uninstalled state the total length of the combinations may be slightly bigger than the nominal dimension. However, they can always be installed in the specified mounting cutouts. 3 ±0.20 Variants 6422.005X.XX Mounting hole: 46.7+0,2 x 27.6+0,2 A: Quick-connect terminal 6.3x0.8 mm: 18.1 mm A: Solder terminal 3.5x0.8 mm: 13.3 mm S: Panel thickness 10 10 30 10 +0.30 0 A 10 +0.30 0 30 10 +0.30 0 Variants 6424.0X5X.XX Mounting hole: 57+0,2 x 27.6+0,2 A: Quick-connect terminal 6.3x0.8 mm: 18.1 mm A: Solder terminal 3.5x0.8 mm: 13.3 mm S: Panel thickness 47.9 1) A 30 10 30 10 +0.30 0 A +0.50 0 S 10 10 10 30 +0.30 0 Variants 6432.0X5X.XX Mounting hole: 90.6+0,2 x 27.6+0,2 A: Quick-connect terminal 6.3x0.8 mm: 18.1 mm A: Solder terminal 3.5x0.8 mm: 13.3 mm S: Panel thickness A 10 A 30 90.6 1) +0.30 0 23 55.0 1) Variants 6421.005X.XX Mounting hole: 53.6+0,2 x 27.6+0,2 A: Quick-connect terminal 6.3x0.8 mm: 17.1 mm A: Solder terminal 3.5x0.8 mm: 12.3 mm Connectors 3 Felcom 64 Power entry modules without line filter https://www.schurter.com /PG05 Diagrams 6422 6423 6424 L 1) LINE N L 2) 1) 1) 1) Load 2 2) Load 1 6431 6432 LINE N L 1) 1) Load 2 2) Load 1 2) 1) Load 2 2) Load 1 N 1) 2) N 1) 1) Line 2) Load 1 LINE LINE 2) 2) 1) Line 2) Load 1 L 6421 2) 1) Load 2 2) Load 1 Derating Curves 2-pole 1-pole Admissible power acceptance in Watt Admissible power acceptance in Watt per pole 1.6 1.4 1.2 1.0 I = 1.0 In 0.8 I = 0.7 In 0.6 I =