6600-4
Connectors (Inlets/Outlets)
https://www.schurter.com /PG07
IEC Appliance Outlet F, Snap-in Mounting, Front Side, Solder or Quick-connect Terminal
F
See below:
Approvals and Compliances
70° C
Description
Other versions on request
Unique Selling Proposition
References
- Panel mount :
Snap-in version front side
- Connector , Pin temperature 70 °C , Protection class I
- Variants with factory mounted inlet gasket and sealing kit for IP54 into
the equipement and the pluggable power supply
- Solder / Quick Connect
- Variants made from plant-based plastics with 4.30 kg CO2 reduction
per packaging unit
- Other panel thickness
- Types for rivet mounting available upon request
- Types for enhanced glow wire test requirements acc. IEC 60695-212 and -13 for the use in unattended household equipment acc. IEC
60335-1
- Variant with notch for V-Lock mating Cordsets
Alternative: version with integrated light pipes 6600-5
Weblinks
pdf data sheet, html datasheet, General Product Information, Approvals,
Distributor-Stock-Check, Accessories, Detailed request for product
Newly available variants corresponding to V-Lock mating cordset. The connector is equipped with a notch intended for use with the latching cordset.
The cord latching system prevents against accidental removal of the cordset.
Technical Data
Ratings IEC
Ratings UL/CSA
Dielectric Strength
Allowable Operation Temperature
IP-Protection
Protection against electric
shock
Terminal
Panel Thickness S
Material: Housing
10 A / 250 VAC; 50 Hz
15 A / 250 VAC; 60 Hz
> 2 kVAC between L-N
> 2 kVAC between L/N-PE
(1 min/50 Hz)
-25 °C to 70 °C
Appliance inlet/-outlet
F acc. to IEC 60320-3
UL 60320-1, CSA C22.2 no. 60320-1
(for cold conditions) pin-temperature 70
°C, 10 A, Protection Class I
front side IP30 acc. to IEC 60529
Suitable for appliances with protection
class I acc. to IEC 61140
Solder / Quick Connect
Snap-in: 1/1.2/1.5/2/2.5/3 mm
Thermoplastic, black, UL 94V-0
Approvals and Compliances
Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about
Approvals
SCHURTER products are designed for use in industrial environments. They have approvals from independent testing bodies according to national
and international standards. Products with specific characteristics and requirements such as required in the automotive sector according to IATF
16949, medical technology according to ISO 13485 or in the aerospace industry can be offered exclusively with customer-specific, individual agreements by SCHURTER.
Approvals
The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products.
Approval Reference Type: 6600-4
Approval Logo
Certificates
Certification Body
Description
VDE Approvals
VDE
Certificate Number: 40017345
UL Approvals
UL
UR File Number: E103791
CCC Approvals
CCC
CCC Certificate Number: 2020180204017597
Connectors
1
6600-4
Connectors (Inlets/Outlets)
https://www.schurter.com /PG07
Product standards
Product standards that are referenced
Organization
Design
Standard
Description
Designed according to
IEC 60320-1
Appliance couplers for household and similar general purposes
Designed according to
IEC 60320-3
Appliance couplers for household and similar general purposes
Designed according to
UL 60320-1
Standard for Attachment Plugs and Receptacles
Designed according to
CSA C22.2 no. 60320-1
General Use Receptacles, Attachment Plugs, and Similar Wiring Devices
Design
Standard
Description
Suitable for applications acc.
IEC/UL 62368-1
Audio/video, information and communication technology equipment - Part
1: Safety requirements
Suitable for applications acc.
IEC 60335-1
Safety of electrical appliances for household and similar purposes. Meets
the requirements for appliances in unattended use. This includes the
enhanced requirements of glow wire tests acc. to IEC 60695-2-11 or -12
& -13.
Details
Initiator
Description
CE declaration of conformity
SCHURTER AG
The CE marking declares that the product complies with the applicable
requirements laid down in the harmonisation of Community legislation on
its affixing in accordance with EU Regulation 765/2008.
UKCA declaration of conformity
SCHURTER AG
The UKCA marking declares that the product complies with the applicable
requirements laid down in the British Amendment of Regulation (EC)
765/2008.
RoHS
SCHURTER AG
Directive RoHS 2011/65/EU, Amendment (EU) 2015/863
China RoHS
SCHURTER AG
The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March
2007. It is similar to the EU directive RoHS.
REACH
SCHURTER AG
On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration,
Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as
"REACH") entered into force.
SCHURTER AG
V-Lock system are based on a matching plug-dose combination. The
connector is equipped with a notch intended for use with the latching
cordset. The cord latching system prevents against accidental removal of
the cordset.
White Paper Glow wire test
SCHURTER AG
Meets the requirements of IEC 60335-1 for appliances in unattended use.
This includes the enhanced requirements of glow wire tests acc. to IEC
60695-2-11 or -12 &-13.
Green Line
SCHURTER AG
Green Line products are aligned with the UN's Strategic Development
Goals (SDGs). Components of the products are made of sustainable,
environmentally friendly materials. These include, for example, bio-based
plastics or lead-free metal alloys. Products in this line can also support the
economical, intelligent use of resources.
Application standards
Application standards where the product can be used
Organization
Compliances
The product complies with following Guide Lines
Identification
2
Connectors
6600-4
Connectors (Inlets/Outlets)
https://www.schurter.com /PG07
Dimensions [mm]
6600-4
32.5+/- 0.1
24.8
28
+0.2
0
S
35
E
max.R4
3
E: Solder terminals: 24.1 mm
E: Quick connect terminals 4.8 x 0.8 mm: 26.5 mm
E: Quick connect terminals 6.3 x 0.8 mm: 27.5 mm
All Variants
Protection Class
Panel mounting
Panel Thickness s [mm]
Terminal
IP Protection
Class Front Side
Order Number
I
-
-
Solder / Quick Connect
IP30
6600.4315
I
Snap-in
1
Quick connect terminals 4.8 x 0.8 mm
IP30
6600.4210
I
Snap-in
1
Quick connect terminals 4.8 x 0.8 mm
IP30
6600.4210.21
█
I
Snap-in
1.2
Quick connect terminals 4.8 x 0.8 mm
IP30
6600.4212
I
Snap-in
1.2
Quick connect terminals 4.8 x 0.8 mm
IP30
6600.4212.21
I
Snap-in
1.5
Quick connect terminals 4.8 x 0.8 mm
IP30
I
Snap-in
1.5
Quick connect terminals 4.8 x 0.8 mm
I
Snap-in
1.5
Quick connect terminals 4.8 x 0.8 mm
I
Snap-in
2
I
Snap-in
2
I
Snap-in
2.5
I
Snap-in
2.5
Quick connect terminals 4.8 x 0.8 mm
IP30
6600.4225.21
I
Snap-in
3
Quick connect terminals 4.8 x 0.8 mm
IP30
6600.4230
3-144-645
█
IP30
6600.4215
█
IP30
6600.4215.21
Quick connect terminals 4.8 x 0.8 mm
IP30
6600.4220
Quick connect terminals 4.8 x 0.8 mm
IP30
6600.4220.21
Quick connect terminals 4.8 x 0.8 mm
IP30
6600.4225
l
█
I
Snap-in
3
Quick connect terminals 4.8 x 0.8 mm
IP30
6600.4230.21
I
Snap-in
1
Quick connect terminals 6.3 x 0.8 mm
IP30
6600.4310
I
Snap-in
1
Quick connect terminals 6.3 x 0.8 mm
IP30
6600.4310.21
I
Snap-in
1.2
Quick connect terminals 6.3 x 0.8 mm
IP30
6600.4312
█
█
I
Snap-in
1.2
Quick connect terminals 6.3 x 0.8 mm
IP30
I
Snap-in
1.5
Quick connect terminals 6.3 x 0.8 mm
IP30
6600.4312.21
3-144-643
█
I
Snap-in
1.5
Quick connect terminals 6.3 x 0.8 mm
IP30
6600.4315
█
I
Snap-in
1.5
Quick connect terminals 6.3 x 0.8 mm
IP30
6600.4315.21
█
I
Snap-in
2
Quick connect terminals 6.3 x 0.8 mm
IP30
6600.4320
█
l
I
Snap-in
2
Quick connect terminals 6.3 x 0.8 mm
IP30
6600.4320.21
I
Snap-in
2.5
Quick connect terminals 6.3 x 0.8 mm
IP30
6600.4325
I
Snap-in
2.5
Quick connect terminals 6.3 x 0.8 mm
IP30
6600.4325.21
Connectors
█
3
6600-4
Connectors (Inlets/Outlets)
https://www.schurter.com /PG07
Protection Class
Panel mounting
Panel Thickness s [mm]
Terminal
IP Protection
Class Front Side
Order Number
I
Snap-in
3
Quick connect terminals 6.3 x 0.8 mm
IP30
6600.4330
█
I
Snap-in
3
Quick connect terminals 6.3 x 0.8 mm
IP30
6600.4330.21
I
Snap-in
1
Solder terminals
IP30
6600.4110
I
Snap-in
1
Solder terminals
IP30
6600.4110.21
I
Snap-in
1.2
Solder terminals
IP30
6600.4112
I
Snap-in
1.2
Solder terminals
IP30
6600.4112.21
I
Snap-in
1.5
Solder terminals
IP30
3-144-644
█
I
Snap-in
1.5
Solder terminals
IP30
6600.4115
█
I
Snap-in
1.5
Solder terminals
IP30
6600.4115.21
I
Snap-in
2
Solder terminals
IP30
3-144-646
█
I
Snap-in
2
Solder terminals
IP30
6600.4120
█
I
Snap-in
2
Solder terminals
IP30
6600.4120.21
I
Snap-in
2.5
Solder terminals
IP30
6600.4125
I
Snap-in
2.5
Solder terminals
IP30
6600.4125.21
I
Snap-in
3
Solder terminals
IP30
6600.4130
I
Snap-in
3
Solder terminals
IP30
6600.4130.21
l
l
█ Most Popular.
Availability for all products can be searched real-time:https://www.schurter.com/en/Stock-Check/Stock-Check-SCHURTER
Suffix ".21" corresponds to the version with V-Lock mating cordset. The connector is equipped with a notch intended for use with the latching cordset. The cord latching
system prevents against accidental removal of the cordset.
Articles for enhanced glow wire test requirements acc. IEC 60695-2-12 and -13 can be ordered with ending ".15" (xxxx.xxxx.15). They are suitable for the use in unattended
household equipment acc. IEC 60335-1.
Packaging unit
50 Pcs
Accessories
Description
Wire_Harness
Wire harness for SCHURTER products
Assorted_Covers
Rear Cover
0859.0047
RC320
Rear Cover for Power Entry Module
4
Connectors
█
6600-4
Connectors (Inlets/Outlets)
https://www.schurter.com /PG07
Description
Cord_retaining_kits
Cord retaining strain relief
Countersunk, D
4700.0004
Countersunk, F
4700.0006
Mating Inlets/Plugs
Category / Description
Plug Overview complete
4732, Mounting: Power Cord, Plug: IEC E, Cable
4732
4735, Mounting: Power Cord, Plug: IEC E, Cable
4735
9009, Mounting: Plug: IEC E, Screw clamps
9009
4733, Mounting: Power Cord, Plug: IEC E, Cable
4733
4736, Mounting: Power Cord, Plug: IEC E, Cable
4736
...
Mating Inlets/Plugs shuttered
Interconnection Cord Overview complete
VAC13KS, Interconnection, V-Lock cord retaining, 0.6 m, Connector IEC C13, H05VV-F3G0.75 / SVT 3x18 AWG, black
3-100-354
VAC13KS, Interconnection, V-Lock cord retaining, 3.0 m, Connector IEC C13, SVT 3x18 AWG, black
3-100-361
VAC13KS, Interconnection, V-Lock cord retaining, 1.8 m, Connector IEC C13, H05VV-F3G0.75 / SVT 3x18 AWG, black
3-100-734
VAC13KS, Interconnection, V-Lock cord retaining, 2.0 m, Connector IEC C13, H05VV-F3G0.75 / SVT 3x18 AWG, black
6051.2007
VAC13KS, Interconnection, V-Lock cord retaining, 1.5 m, Connector IEC C13, H05VV-F3G0.75, black
6051.2067
...
26.07.2023
The specifications, descriptions and illustrations indicated in this document are based on current
information. All content is subject to modifications and amendments. Information furnished is believed
to be accurate and reliable. However, users should independently evaluate the suitability and test each
product selected for their own applications.
Connectors
5
