6600.4212

6600-4 Connectors (Inlets/Outlets) https://www.schurter.com /PG07 IEC Appliance Outlet F, Snap-in Mounting, Front Side, Solder or Quick-connect Terminal F See below: Approvals and Compliances 70° C Description Other versions on request - Panel mount : Snap-in version front side - Connector , Pin temperature 70 °C , Protection class I - Solder / Quick Connect - Other panel thickness - Types for rivet mounting available upon request - Types for enhanced glow wire test requirements acc. IEC 60695-212 and -13 for the use in unattended household equipment acc. IEC 60335-1 - Variant with notch for V-Lock mating Cordsets References Alternative: version with integrated light pipes   6600-5  Weblinks pdf data sheet, html datasheet, General Product Information, Approvals, Distributor-Stock-Check, Accessories, Detailed request for product Newly available variants corresponding to V-Lock mating cordset. The connector is equipped with a notch intended for use with the latching cordset. The cord latching system prevents against accidental removal of the cordset. Technical Data   Ratings IEC Ratings UL/CSA Dielectric Strength Allowable Operation Temperature IP-Protection Protection against electric shock Terminal Panel Thickness S Material: Housing 10 A / 250 VAC; 50 Hz 15 A / 250 VAC; 60 Hz > 2 kVAC between L-N > 2 kVAC between L/N-PE (1 min/50 Hz) -25 °C to 70 °C Appliance inlet/-outlet F acc. to IEC 60320-3 UL 60320-1, CSA C22.2 no. 60320-1 (for cold conditions) pin-temperature 70 °C, 10 A, Protection Class I front side IP30 acc. to IEC 60529 Suitable for appliances with protection class I acc. to IEC 61140 Solder / Quick Connect Snap-in: 1/1.2/1.5/2/2.5/3 mm Thermoplastic, black, UL 94V-0 Approvals and Compliances Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in  Details about Approvals SCHURTER products are designed for use in industrial environments. They have approvals from independent testing bodies according to national and international standards. Products with specific characteristics and requirements such as required in the automotive sector according to IATF 16949, medical technology according to ISO 13485 or in the aerospace industry can be offered exclusively with customer-specific, individual agreements by SCHURTER. Approvals The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products. Approval Reference Type: 6600-4 Approval Logo Certificates Certification Body Description VDE Approvals VDE Certificate Number: 40017345 UL Approvals UL UR File Number: E103791 CCC Approvals CCC CCC Certificate Number: 2020180204017597 Connectors 1 6600-4 Connectors (Inlets/Outlets) https://www.schurter.com /PG07 Product standards Product standards that are referenced Organization Design Standard Description Designed according to IEC 60320-1 Appliance couplers for household and similar general purposes Designed according to IEC 60320-3 Appliance couplers for household and similar general purposes Designed according to UL 60320-1 Standard for Attachment Plugs and Receptacles Designed according to CSA C22.2 no. 60320-1 General Use Receptacles, Attachment Plugs, and Similar Wiring Devices Design Standard Description Suitable for applications acc. IEC/UL 62368-1 Audio/video, information and communication technology equipment - Part 1: Safety requirements Suitable for applications acc. IEC 60335-1 Safety of electrical appliances for household and similar purposes. Meets the requirements for appliances in unattended use. This includes the enhanced requirements of glow wire tests acc. to IEC 60695-2-11 or -12 & -13. Details Initiator Description CE declaration of conformity SCHURTER AG The CE marking declares that the product complies with the applicable requirements laid down in the harmonisation of Community legislation on its affixing in accordance with EU Regulation 765/2008. UKCA declaration of conformity SCHURTER AG The UKCA marking declares that the product complies with the applicable requirements laid down in the British Amendment of Regulation (EC) 765/2008. RoHS SCHURTER AG Directive RoHS 2011/65/EU, Amendment (EU) 2015/863 China RoHS SCHURTER AG The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March 2007. It is similar to the EU directive RoHS. REACH SCHURTER AG On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration, Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as "REACH") entered into force. SCHURTER AG V-Lock system are based on a matching plug-dose combination. The connector is equipped with a notch intended for use with the latching cordset. The cord latching system prevents against accidental removal of the cordset. SCHURTER AG Meets the requirements of IEC 60335-1 for appliances in unattended use. This includes the enhanced requirements of glow wire tests acc. to IEC 60695-2-11 or -12 &-13. Application standards Application standards where the product can be used Organization Compliances The product complies with following Guide Lines Identification White Paper Glow wire test Dimensions [mm] 6600-4 32.5 35 24.8 28 +0.2 0 S E 3 E: Solder terminals: 24.1 mm E: Quick connect terminals 4.8 x 0.8 mm: 26.5 mm E: Quick connect terminals 6.3 x 0.8 mm: 27.5 mm 2 Connectors max.R4 6600-4 Connectors (Inlets/Outlets) https://www.schurter.com /PG07 All Variants Panel mounting Panel Thickness s [mm] Terminal IP Protection Class Front Side Order Number Snap-in 1 Quick connect terminals 4.8 x 0.8 mm IP30 6600.4210 Snap-in 1 Quick connect terminals 4.8 x 0.8 mm IP30 6600.4210.21 Snap-in 1.2 Quick connect terminals 4.8 x 0.8 mm IP30 6600.4212 Snap-in 1.2 Quick connect terminals 4.8 x 0.8 mm IP30 6600.4212.21 Snap-in 1.5 Quick connect terminals 4.8 x 0.8 mm IP30 6600.4215 Snap-in 1.5 Quick connect terminals 4.8 x 0.8 mm IP30 6600.4215.21 Snap-in 2 Quick connect terminals 4.8 x 0.8 mm IP30 6600.4220 Snap-in 2 Quick connect terminals 4.8 x 0.8 mm IP30 6600.4220.21 Snap-in 2.5 Quick connect terminals 4.8 x 0.8 mm IP30 6600.4225 Snap-in 2.5 Quick connect terminals 4.8 x 0.8 mm IP30 6600.4225.21 Snap-in 3 Quick connect terminals 4.8 x 0.8 mm IP30 6600.4230 Snap-in 3 Quick connect terminals 4.8 x 0.8 mm IP30 6600.4230.21 Snap-in 1 Quick connect terminals 6.3 x 0.8 mm IP30 6600.4310 Snap-in 1 Quick connect terminals 6.3 x 0.8 mm IP30 6600.4310.21 Snap-in 1.2 Quick connect terminals 6.3 x 0.8 mm IP30 6600.4312 Snap-in 1.2 Quick connect terminals 6.3 x 0.8 mm IP30 6600.4312.21 Snap-in 1.5 Quick connect terminals 6.3 x 0.8 mm IP30 6600.4315 █ Snap-in 1.5 Quick connect terminals 6.3 x 0.8 mm IP30 6600.4315.21 █ Snap-in 2 Quick connect terminals 6.3 x 0.8 mm IP30 6600.4320 █ Snap-in 2 Quick connect terminals 6.3 x 0.8 mm IP30 6600.4320.21 Snap-in 2.5 Quick connect terminals 6.3 x 0.8 mm IP30 6600.4325 Snap-in 2.5 Quick connect terminals 6.3 x 0.8 mm IP30 6600.4325.21 Snap-in 3 Quick connect terminals 6.3 x 0.8 mm IP30 6600.4330 Snap-in 3 Quick connect terminals 6.3 x 0.8 mm IP30 6600.4330.21 Snap-in 1 Solder terminals IP30 6600.4110 Snap-in 1 Solder terminals IP30 6600.4110.21 Snap-in 1.2 Solder terminals IP30 6600.4112 Snap-in 1.2 Solder terminals IP30 6600.4112.21 Snap-in 1.5 Solder terminals IP30 6600.4115 Snap-in 1.5 Solder terminals IP30 6600.4115.21 Snap-in 2 Solder terminals IP30 6600.4120 Snap-in 2 Solder terminals IP30 6600.4120.21 Snap-in 2.5 Solder terminals IP30 6600.4125 Snap-in 2.5 Solder terminals IP30 6600.4125.21 Snap-in 3 Solder terminals IP30 6600.4130 Snap-in 3 Solder terminals IP30 6600.4130.21 █ █ █ █ █ █ █ █ █ █ █ Most Popular. Availability for all products can be searched real-time:https://www.schurter.com/en/Stock-Check/Stock-Check-SCHURTER Suffix ".21" corresponds to the version with V-Lock mating cordset. The connector is equipped with a notch intended for use with the latching cordset. The cord latching system prevents against accidental removal of the cordset. Articles for enhanced glow wire test requirements acc. IEC 60695-2-12 and -13 can be ordered with ending ".15" (xxxx.xxxx.15). They are suitable for the use in unattended household equipment acc. IEC 60335-1. Packaging unit   50 Pcs  Connectors 3 6600-4 Connectors (Inlets/Outlets) https://www.schurter.com /PG07 Accessories Description Wire Harness Wire harness for SCHURTER products   Assorted Covers Rear Cover   0859.0047   RC320 Rear Cover for Power Entry Module   Cord retaining kits Cord retaining strain relief   Countersunk, D 4700.0004 Countersunk, F 4700.0006   Mating Inlets/Plugs Category / Description Plug Overview complete 4732, Mounting: Power Cord, Plug: IEC E, Cable 4732 4735, Mounting: Power Cord, Plug: IEC E, Cable 4735 9009, Mounting: Plug: IEC E, Screw clamps 9009 4733, Mounting: Power Cord, Plug: IEC E, Cable 4733 4736, Mounting: Power Cord, Plug: IEC E, Cable 4736 ...   Mating Inlets/Plugs shuttered VAC13KS, Interconnection, V-Lock cord retaining, 0.6 m, Connector IEC C13, H05VV-F3G0.75 / SVT 3x18 AWG, black 3-100-354 VAC13KS, Interconnection, V-Lock cord retaining, 3.0 m, Connector IEC C13, SVT 3x18 AWG, black 3-100-361 VAC13KS, Interconnection, V-Lock cord retaining, 1.8 m, Connector IEC C13, H05VV-F3G0.75 / SVT 3x18 AWG, black 3-100-734 VAC13KS, Interconnection, V-Lock cord retaining, 2.0 m, Connector IEC C13, H05VV-F3G0.75 / SVT 3x18 AWG, black 6051.2007 VAC13KS, Interconnection, V-Lock cord retaining, 1.5 m, Connector IEC C13, H05VV-F3G0.75, black 6051.2067 ...   4 Connectors The specifications, descriptions and illustrations indicated in this document are based on current information. All content is subject to modifications and amendments. Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability and test each product selected for their own applications. 05.04.2022 Interconnection Cord Overview complete