8843.0902

0040 AC Inlet with 5 x 20mm Fuseholder • • • • Note: Not recommended for new designs. Refer to KEA (pg. 36), GSF (pg. 13/14) or 6220 (pg. 35) Standards: UL 498; CSA C22.2/182.3; DIN/VDE 0625; SEMKO 9320; IEC 320/C14/C18; EN 60320 • • • • • Power entry module with 1-pole or 2-pole fuseholder For “cold” connections 70° C, Protection Class I or II Screw mount from front Single or double pole shocksafe fuseholder according to IEC 65/VDE 0860 for 5 x 20mm fuses Quick-connect terminals .187 x .032" (4.8 x 0.8mm) 0.5 Nm torque required for M3 screws Max. power dissipation 2.4 watts (2-pole fusing) according to IEC 127-6. For additional values Pv in function of Tamb , see page 5 For materials, options and accessories please see page 30 For inlet with piggy-back fuse clips see GSF, page 13-14 UL CSA VDE SEMKO SEV recognition certification approval approval approval 10A/250V 10A/250V 6A/250V 10A/250V 10A/250V File #E93617 File #LR38456 File #19397 File numbers on request page 102. Series 0040 Class I 0040.5000.2 8843-2.SP.FL.4/3.60 0040.5001.2 8843-2.SP.FL.4/3.64 0040.5012 8843-2.SP.U.FL.4/3.60 8843 Class II 0040.5015 8842-2.SP.FL.4/3.60 Color/Fusing black/2-pole grey/2-pole black/1-pole Terminal Type solder .138" x .032" (3.5 x 0.8mm) quick-connect .187" x .032" (4.8 x 0.8mm) quick-connect .250" x .032" (6.3 x 0.8mm) AC Inlet • Interchangeable Fuseholders for 1/4 x 11/4" or 5 x 20mm Fuses Standards: UL 498; CSA C22.2/ 182.3; DIN/VDE 0625; SEMKO 9320; IEC 320/C14; EN 60320. U.S. Patented. • Power entry module with 1-pole or 2-pole fuseholder • For “cold” connections 70° C, Protection Class I. • Screw mount from front or rear, or snap-in mount from front (0.8-3.0mm panel thickness) • Single or double pole shocksafe fuseholder according to IEC 65/VDE 0860 for 1/4 x 11/4" or 5 x 20mm fuses • Quick-connect terminals .187 x .032" (4.8 x 0.8mm) or solder .138 x .032" (3.0 x 0.8mm). • 0.5 Nm torque required for M3 screws for screw-on type • Max. power dissipation 5.5 watts (2 pole fusing, unfiltered) according to IEC 127-6. For additional values Pv in function of Tamb , see page 6 • For materials, options and accessories please see page 30 • For 8843 with line filter, please see 8843 on page 59 • For inlet with piggy-back fuse clips see GSF, page 13-14 UL CSA VDE SEMKO SEV recognition certification approval approval approval 10A/250V 10A/250V 10A/250V 10A/250V 10A/250V File #E96317 File #LR38456 File #3157, expert report File numbers on request Order Numbers (type) Note: Casing and fuseholders must be ordered separately. To order fuses, please see page 102. Casing 8843 1-pole fusing 8843.0351 (8843-351.60) 8843.0353 (8843-353.60) 8843.0451 (8843-451.60) 8843.0453 (8843-453.60) 2-pole fusing 8843.0361 (8843-361.60) 8843.0363 (8843-363.60) 8843.0461 (8843-461.60) 8843.0463 (8843-463.60) Terminals Solder .138" X .032" (3.0 x 0.8mm) Quick-connect .187" x .032" (4.8 x 0.8mm) Solder .138" X .032" (3.0 x 0.8mm) Quick-connect .187" x .032" (4.8 x 0.8mm) Mounting Screw-on Screw-on Snap-in,0.8-3.0mm panel thickness Snap-in,0.8-3.0mm panel thickness Fuseholder inserts* (2 inserts must be ordered for 2-pole fusing) 8843.0901 1/4 x 1 1/4" 8843-901.60 (6.3x32mm) 8843.0902 for 5 x 20mm 8843-902.60 Schurter, Inc. • Phone 707-778-6311 • Fax 707-778-6401 • E-mail info@schurterinc.com • Website http://www.schurterinc.com 37