8843.4851

8842/8843 Power entry modules without line filter https://www.schurter.com /PG05 IEC Appliance Inlet C14 with Fuseholder 2-pole C14 C18 70° C 70° C Approvals and Compliances Description - Panel Mount : Screw-on mounting from front side - 2 Functions : Appliance Inlet protection class I or II , Fuseholder for fuse-links 5 x 20 mm , 1‑ or 2‑pole - Quick connect terminals 4.8 x 0.8 mm Characteristics - All single elements are already wired - With slotted screw type fuseholder - Suitable for use in equipment according to IEC/UL 60950 References We recommend for new applications the new type   4707  Weblinks pdf datasheet, html-datasheet, General Product Information, DistributorStock-Check, Accessories, Detailed request for product Technical Data   Ratings IEC Ratings UL/CSA Dielectric Strength Allowable Operation Temperature IP-Protection Insulation cover Terminal Panel Thickness S Material: Housing 10 A / 250 VAC; 50 Hz 6 A / 250 VAC; 60 Hz > 2 kVAC between L-N > 4 kVAC between L/N-PE (1 min/50 Hz) -25 °C to 70 °C appliance inlet/-outlet from front side IP 40 acc. to IEC 60529 Suitable for appliances with protection class I or II acc. to IEC 61140 Quick connect terminals 4.8 x 0.8 mm Screw: max 6 mm Mounting screw torque max 0.5 Nm Thermoplastic, black, UL 94V-0 Rated Power Acceptance @ Ta 23 °C Power Acceptance @ Ta > 23°C Fuseholder C14 / C18 acc. to IEC 60320-1, UL 498, CSA C22.2 no. 42 (for cold conditions) pin-temperature 70 °C, 10 A, Protection Class I or II 1 or 2 pole, Shocksafe category PC2 acc. to IEC 60127-6, for fuse-links 5 x 20 mm 5 x 20: 1.6 W (1 pole)/ 1,2 W (2-pole) per pole Admissible power acceptance at higher ambient temperature see derating curves Approvals and Compliances Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in   Details about Approvals Approvals The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products. Approval Reference Type: 8842 / 8843 Approval Logo Certificates Certification Body Description UL Approvals UL UL File Number: E93617 CSA Approvals CSA CSA Certification Record: 70111 Connectors 1 8842/8843 Power entry modules without line filter https://www.schurter.com /PG05 Product standards Product standards that are referenced Organization Design Standard Description Designed according to IEC 60320-1 Appliance couplers for household and similar general purposes Designed according to IEC 60127-6 Miniature fuses. Part 6. Fuse-holders for miniature fuse-links Designed according to IEC 61058-1 Switches for appliances. Part 1. General requirements Designed according to UL 498 Standard for Attachment Plugs and Receptacles Designed according to CSA C22.2 no. 42 General Use Receptacles, Attachment Plugs, and Similar Wiring Devices Design Standard Description Designed for applications acc. IEC/UL 60950 IEC 60950-1 includes the basic requirements for the safety of information technologyequipment. Designed for applications acc. IEC 60601-1 Medical electrical equipment - Part 1: General requirements for basic safety and essential performance Designed for applications acc. IEC 60335-1 Safety of electrical appliances for household and similar purposes. Meets the requirements for appliances in unattended use. This includes the enhanced requirements of glow wire tests acc. to IEC 60695-2-12 and -13. Details Initiator Description CE declaration of conformity SCHURTER AG The CE marking declares that the product complies with the applicable requirements laid down in the harmonisation of Community legislation on its affixing in accordance with EU Regulation 765/2008. RoHS SCHURTER AG EU Directive RoHS 2011/65/EU China RoHS SCHURTER AG The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March 2007. It is similar to the EU directive RoHS. REACH SCHURTER AG On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration, Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as "REACH") entered into force. Medical Equipment SCHURTER AG Suitable for use in medical equipment according to IEC/UL 60601-1 Application standards Application standards where the product can be used Organization Compliances The product complies with following Guide Lines Identification Dimensions [mm]   6.2x90˚ 3.2 33.3 37.5 32.5 +0.2 0 40 M3 26.5 40 50 2 Connectors 6 max. R1.5 33.3 +0.2 0 8842/8843 Power entry modules without line filter https://www.schurter.com /PG05 Diagrams     L L N L N L E E N Derating Curves 1-pole 2-pole Admissible power acceptance in Watt per pole Admissible power acceptance in Watt 1.6 1.4 1.2 1.0 I = 1.0 In 0.8 I = 0.7 In I = < < In 0.6 0.4 0.2 0.0 0 20 40 60 80 100 Ambient air temperature Ta °C 1.2 1.0 0.8 I = 1.0 In I = 0.7 In 0.6 I =