C22F.0002

C22F Power Entry Modules with Line Filter https://www.schurter.com /PG06 IEC Appliance Inlet C22 for hot Conditions, with Filter for high Temperatures, front side Mounting C22 See below: Approvals and Compliances 155° C Description - Panel mount : Screw-on from front side - 2 Functions : Appliance Inlet Protection class I , Line filter in standard and medical version - Solder / quick connect / wires (stranded) Unique Selling Proposition - For higher temperatures - Attractive flat front design - Highly resistant since fully potted - Various filter variants Characteristics - Compact design with optimal shielding Suitable for high ambient temperatures up to 75°C - Version with class X1 and X2 (standard version) capacitors - Universal line filter for standard applications - Suitable for use in medical equipment according to IEC/UL 60601-1 (1 MOOP, 1 MOPP) For applications according IEC/UL 62368-1 we recommend variants with bleed resistor Other versions on request - flexible wire with various lenghts References Alternative: version without line filter   1681  Weblinks pdf data sheet, html datasheet, General Product Information, Approvals, Distributor-Stock-Check, Accessories, Detailed request for product Technical Data Ratings IEC Ratings UL/CSA Leakage Current Dielectric Strength Impulse Withstand Voltage Allowable Operation Temperature Climatic Category IP-Protection Protection Class Terminal Panel Thickness S Material   16 A @ Ta 75 °C / 250 VAC; 50 Hz 20 A @ Ta 65 °C / 250 VAC; 60 Hz standard < 0.5 mA (250 V / 60 Hz) medical < 5 µA (250 V / 60 Hz) > 1.7 kVDC between L-N (Cy2) > 2.7 kVDC between L/N-PE (Cy2) Test voltage (2 sec) > 2.5 kV between L-N (CX2) > 4 kV between L-N (CX1) > 5 kV between L/N-PE (Cy2) voltage (1.2/50 μs) -25 °C to 100 °C Appliance inlet/-outlet Line Filter MTBF C22 acc. to IEC 60320-1, UL 498, CSA C22.2 no. 42 (for hot conditions) pin-temperature 155 °C, 16 A, Protection Class I Standard and Medical Version, IEC 60939, UL 1283, CSA C22.2 no. 8 Technical Details > 1'400'000 h acc. to MIL-HB-217 F 25/100/21 acc. to IEC 60068-1 front side IP40 acc. to IEC 60529 Suitable for appliances with protection class I acc. to IEC 61140 Solder / quick connect / wires (stranded) Screw: max 8 mm Mounting screw torque max 0.5 Nm Thermoplastic, black, UL 94V-0 Approvals and Compliances Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in  Details about Approvals SCHURTER products are designed for use in industrial environments. They have approvals from independent testing bodies according to national and international standards. Products with specific characteristics and requirements such as required in the automotive sector according to IATF 16949, medical technology according to ISO 13485 or in the aerospace industry can be offered exclusively with customer-specific, individual agreements by SCHURTER. EMC Products 1 C22F Power Entry Modules with Line Filter https://www.schurter.com /PG06 Approvals The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products. Approval Reference Type: C22F Approval Logo Certificates Certification Body Description VDE Approvals VDE Certificate Number: 104884 UL Approvals UL UR File Number: E72928 Design Standard Description Designed according to IEC 60320-1 Appliance couplers for household and similar general purposes Designed according to IEC 60939 Passive filters for suppressing electromagnetic interference Designed according to IEC 61058-1 Switches for appliances. Part 1. General requirements Designed according to UL 498 Standard for Attachment Plugs and Receptacles Designed according to UL 1283 Electromagnetic interference filters Designed according to CSA C22.2 no. 42 General Use Receptacles, Attachment Plugs, and Similar Wiring Devices Designed according to CSA C22.2 no. 8 Electromagnetic interference (EMI) filters Design Standard Description Suitable for applications acc. IEC/UL 62368-1 Audio/video, information and communication technology equipment - Part 1: Safety requirements Suitable for applications acc. IEC 60601-1 Medical electrical equipment - Part 1: General requirements for basic safety and essential performance Details Initiator Description CE declaration of conformity SCHURTER AG The CE marking declares that the product complies with the applicable requirements laid down in the harmonisation of Community legislation on its affixing in accordance with EU Regulation 765/2008. UKCA declaration of conformity SCHURTER AG The UKCA marking declares that the product complies with the applicable requirements laid down in the British Amendment of Regulation (EC) 765/2008. RoHS SCHURTER AG Directive RoHS 2011/65/EU, Amendment (EU) 2015/863 China RoHS SCHURTER AG The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March 2007. It is similar to the EU directive RoHS. REACH SCHURTER AG On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration, Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as "REACH") entered into force. Medical Equipment SCHURTER AG Suitable for use in medical equipment according to IEC/UL 60601-1 (1 MOOP, 1 MOPP) Product standards Product standards that are referenced Organization Application standards Application standards where the product can be used Organization Compliances The product complies with following Guide Lines Identification 2 EMC Products C22F Power Entry Modules with Line Filter https://www.schurter.com /PG06 Dimension [mm] Screw-on mounting with quick connect terminals 11.6 3.5/M3 ø 3.3 64.65 21.2 ±0.20 42 ±0.15 34.8 +0.20 0 6.3 33.9 x 25.9 53 42 29.2 ±0.20 9.4 90° 30 max. R3 3.85 26.8 +0.20 0 80.1 Screw-on mounting with wire leads 30 PE 42 ±0.15 ø 6.3 +0.20 33.9 0 x 25.9 +0.20 0 53 42 29.2 ±0.20 N 34.8 +0.20 0 90° ø 3.3 3.5/M3 max. R3 L 11.6 B A 21.2 ±0.20 64.65 3.85 26.8 +0.20 0 Technical Data of Filter-Components Rated Current [A] Filter-Type Inductances L [mH] Capacitance CX [nF] Capacitance CY [nF] R [MΩ] 16 Standard version 2 x 0.6 100 2.2 1 16 Standard version 2 x 0.6 330 2.2 1 20 Standard version 2 x 0.3 100 2.2 1 20 Standard version 2 x 0.3 330 2.2 1 16 Medical Version (M5) 2 x 0.6 100 - 1 20 Medical Version (M5) 2 x 0.3 100 - 1 20 Medical Version (M5) 2 x 0.3 330 - 1 16 Medical Version (M80) 2 x 0.6 100 0.47 1 20 Medical Version (M80) 2 x 0.3 100 0.47 1 EMC Products 3 C22F Power Entry Modules with Line Filter https://www.schurter.com /PG06 Diagrams Medical Version (M5) Standard version L L L’ L’ L1 L1 1) PE Cx PE’ 2) R 1) PE L2 N L2 Cy N N’ 1) Line 2) Load Cx Cy R PE’ 2) N’ 1) Line 2) Load Attenuation Loss - - - - 50Ω differential mode _____ 50Ω common mode Standard version 16 A 20 A Medical version (M5) 16 A 20 A Medical version (M80) 16 A 20 A All Variants Rated Current IEC [A] Rated Current Filter-Type UL [A] Panel mounting Mounting side Terminal Capacitor V-Lock Order Number 16 16 Standard version Screw Front Side Quick connect terminals 6.3 x 0.8 mm X2 330nF C22F.1107 16 20 Standard version Screw Front Side Quick connect terminals 6.3 x 0.8 mm X2 100nF C22F.0101 16 16 Standard version Screw Front Side Quick connect terminals 6.3 x 0.8 mm X2 100nF C22F.1101 16 20 Standard version Screw Front Side Quick connect terminals 6.3 x 0.8 mm X1 100nF C22F.0103 16 20 Standard version Screw Front Side Solder terminal X2 330nF C22F.0007 16 20 Standard version Screw Front Side Solder terminal X2 100nF C22F.0001 4 EMC Products C22F Power Entry Modules with Line Filter https://www.schurter.com /PG06 Rated Current IEC [A] Rated Current Filter-Type UL [A] Panel mounting Mounting side Terminal Capacitor V-Lock Order Number 16 16 Standard version Screw Front Side Solder terminal X2 100nF C22F.1001 16 20 Standard version Screw Front Side Solder terminal X1 100nF C22F.0003 16 20 Medical Version (M5) Screw Front Side Quick connect terminals 6.3 x 0.8 mm X2 100nF C22F.0102 16 16 Medical Version (M5) Screw Front Side Quick connect terminals 6.3 x 0.8 mm X2 100nF C22F.1102 16 20 Medical Version (M5) Screw Front Side Solder terminal X2 330nF C22F.0008 16 20 Medical Version (M5) Screw Front Side Solder terminal X2 100nF C22F.0002 16 16 Medical Version (M5) Screw Front Side Solder terminal X2 100nF C22F.1002 16 16 Medical Version (M80) Screw Front Side Solder terminal X2 100nF C22F.1005 Availability for all products can be searched real-time:https://www.schurter.com/en/Stock-Check/Stock-Check-SCHURTER Packaging unit  20 Pcs  Accessories Description Wire_Harness Wire harness for SCHURTER products   Assorted_Covers Rear Cover   RC320 Rear Cover for Power Entry Module   Mating Outlets/Connectors Category / Description Connector Overview complete 1658, Mounting: Power Cord, Screw clamps Connector: IEC C21 1658.0000   EMC Products 5 C22F Power Entry Modules with Line Filter https://www.schurter.com /PG06 Power Supply Cord Overview complete Cord Sets 16 A, Europlug, 2.5 m, Connector IEC C21, H05VV-F3G1.5, black 6051.5001 15.08.2023   6 EMC Products The specifications, descriptions and illustrations indicated in this document are based on current information. All content is subject to modifications and amendments. Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability and test each product selected for their own applications.