CMF2.1031.12

CMF2 Power entry modules without line filter https://www.schurter.com /PG05 IEC Appliance Inlet C8 polarized with Line Switch 1-pole CMF2 IEC connector C8 polarized with line switch 1-pole PCB C8 polarized See below: Approvals and Compliances 70° C Description - Panel mount : Screw-on mounting on PCB , from top / bottom - 2 Functions : Appliance Inlet Protection class II , Line Switch 1‑pole - For PCB mounting Characteristics - Easy mounting with center bolt and snapper or srewed on PCB or housing - Electrical connection done on the PCB - Standard CMF with switch on the right side - With or without rear-side insulation cover - Suitable for use in equipment according to IEC/UL 62368-1 Other versions on request - Line switch with other rocker marking References Alternative: unpolarized version or protection class I   CMF1;  CMF3  Weblinks pdf data sheet, html datasheet, General Product Information, Approvals, Distributor-Stock-Check, Accessories, Detailed request for product Technical Data Ratings IEC Ratings UL/CSA Dielectric Strength Allowable Operation Temperature IP-Protection Protection against electric shock Terminal Material: Housing   2.5 A / 250 VAC; 50 Hz 2.5 A / 250 VAC; 60 Hz 7A / 125 VAC; 60Hz  > 2.3 kVAC between L-N > 2.8 kVAC between L/N-PE (1 min/50 Hz) -25 °C to 70 °C Appliance inlet/-outlet Line Switch C8p following IEC 60320-1, UL 60320-1, CSA C22.2 no. 60320-1 (for cold conditions) pin-temperature 70 °C, 2.5 A, Protection Class II Rocker switch 1-pole, non-illuminated, acc. to IEC 61058-1 Technical Details front side IP40 acc. to IEC 60529 Suitable for appliances with protection class II acc. to IEC 61140 PCB 1.6  mm Thermoplastic, black, UL 94V-0 Approvals and Compliances Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in  Details about Approvals SCHURTER products are designed for use in industrial environments. They have approvals from independent testing bodies according to national and international standards. Products with specific characteristics and requirements such as required in the automotive sector according to IATF 16949, medical technology according to ISO 13485 or in the aerospace industry can be offered exclusively with customer-specific, individual agreements by SCHURTER. Connectors 1 CMF2 Power entry modules without line filter https://www.schurter.com /PG05 Approvals The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products. Approval Reference Type: CMF Approval Logo Certificates Certification Body Description VDE Approvals VDE VDE Certificate Number: 40018468 UL Approvals UL UR File Number: E96454 CCC Approvals CCC CCC Certificate Number: 2007010204227779 Design Standard Description Designed according to IEC 60320-1 Appliance couplers for household and similar general purposes Designed according to IEC 61058-1 Switches for appliances. Part 1. General requirements Designed according to UL 60320-1 Standard for Attachment Plugs and Receptacles Designed according to CSA C22.2 no. 60320-1 General Use Receptacles, Attachment Plugs, and Similar Wiring Devices Design Standard Description Suitable for applications acc. IEC/UL 62368-1 Audio/video, information and communication technology equipment - Part 1: Safety requirements Details Initiator Description CE declaration of conformity SCHURTER AG The CE marking declares that the product complies with the applicable requirements laid down in the harmonisation of Community legislation on its affixing in accordance with EU Regulation 765/2008. UKCA declaration of conformity SCHURTER AG The UKCA marking declares that the product complies with the applicable requirements laid down in the British Amendment of Regulation (EC) 765/2008. RoHS SCHURTER AG Directive RoHS 2011/65/EU, Amendment (EU) 2015/863 China RoHS SCHURTER AG The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March 2007. It is similar to the EU directive RoHS. REACH SCHURTER AG On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration, Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as "REACH") entered into force. Dimensions [mm] Fixation on PCB or housing from above Fixation on PCB or housing from below Product standards Product standards that are referenced Organization Application standards Application standards where the product can be used Organization Compliances The product complies with following Guide Lines Identification +0.30 11 +0.15 1) self tapping screw 2 14.3 1) M3x12 9 ±0.1 0 5.9- 0.1 1.6 13 13.4 9 4.2±0.05 1) M3x12 1) self tapping screw Connectors 11±0.13 CMF2 Power entry modules without line filter https://www.schurter.com /PG05 Drilling Diagram / CMF1 and CMF2 10.2 8.25 7 +0.1 0 1.6 8.6 +0.1 0 D1 21.6 10 3 3 5.3 11 6.16 1.6 3.2 23.4 45±0.1 28.05 29.85 D1 = 6.2 mm mounting from above D1 = 3.6 mm mounting from below 24.3 53.3 2.3 26.65 22.3 2.3 26.65 0.9 2 3 19 R 1 1.6 2.8 N 4 4 3 9 18 R L 0 0.8 1.05 3 -0.1 10.2 8.25 2.8 8.6 18.45 0.8 7 8.15 6.16 8 4.15 10 45 ±0.1 27.55 11 3 25.75 2.4 1.3 With insulation cover The size of the mounting cut-out can be selected as required. All Variants Connectors Mounting side Cover Ground terminal Ground terminal direction Order Number C8p from below with cover   - CMF2.1131.12 C8p from below without cover   - CMF2.1031.12 C8p from top with cover   - CMF2.1111.12 C8p from top without cover   - CMF2.1011.12 Availability for all products can be searched real-time:https://www.schurter.com/en/Stock-Check/Stock-Check-SCHURTER 50 Pcs  11.08.2023 Packaging unit   The specifications, descriptions and illustrations indicated in this document are based on current information. All content is subject to modifications and amendments. Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability and test each product selected for their own applications. Connectors 3