DC11.0021.203

DC11 Power entry modules without line filter https://www.schurter.com /PG05 IEC Appliance Inlet C14 or C18 with Line Switch 1- or 2-pole Screw-on mounting non-illuminated from front side C14 Snap-in version non-illuminated Screw-on mounting and line Switch illuminated green C18 See below: Approvals and Compliances 70° C 70° C Description Characteristics Unique Selling Proposition Other versions on request - Panel mount : Screw-on version from front or rear side, snap-in version front side - Appliance Inlet protection class I or II , Line Switch 1‑ or 2‑pole - V-Lock notch standard - Quick connect terminals 4.8 x 0.8 mm - Ultra compact design - Line switch for high inrush currents - Components internally wired - V-Lock cord retaining - All single elements are already wired - Unwired versions available on request - Line switch non-illuminated or illuminated - Ideal for application with high transient loads - Suitable for use in equipment according to IEC/UL 62368-1 - Unwired versions - Solder terminals - Line switch with other rocker marking References Alternative: version with line filter   DC12  Substitute for type   KEB1;  KEB2;  6010-K  Weblinks pdf data sheet, html datasheet, General Product Information, Approvals, Distributor-Stock-Check, Accessories, Detailed request for product Technical Data Ratings IEC Ratings UL/CSA Dielectric Strength Allowable Operation Temperature IP-Protection Protection against electric shock Terminal Panel Thickness S Material: Housing   10 A / 250 VAC; 50 Hz 15 A / 250 VAC; 60 Hz > 2.5 kVAC between L-N > 3 kVAC between L/N-PE (1 min/50 Hz) -25 °C to 70 °C Appliance inlet/-outlet Line Switch C14 / C18 acc. to IEC 60320-1, UL 60320-1, CSA C22.2 no. 60320-1 (for cold conditions) pin-temperature 70 °C, 10 A, Protection Class I or II Rocker switch 1-/2-pole, non-illuminated or illuminated, acc. to IEC 61058-1 Technical Details front side IP40 acc. to IEC 60529 Suitable for appliances with protection class I or II acc. to IEC 61140 Quick connect terminals 4.8 x 0.8 mm Screw: max 6 mm Mounting screw torque max 0.5 Nm Snap-in: 1/1.5/2/2.5/3 mm Thermoplastic, black, UL 94V-0 Approvals and Compliances Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in  Details about Approvals SCHURTER products are designed for use in industrial environments. They have approvals from independent testing bodies according to national and international standards. Products with specific characteristics and requirements such as required in the automotive sector according to IATF 16949, medical technology according to ISO 13485 or in the aerospace industry can be offered exclusively with customer-specific, individual agreements by SCHURTER. Connectors 1 DC11 Power entry modules without line filter https://www.schurter.com /PG05 Approvals The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products. Approval Reference Type: DC11 Approval Logo Certificates Certification Body Description VDE Approvals VDE Certificate Number: 40007009 UL Approvals UL UL File Number: E96454 CCC Approvals CCC CCC Certificate Number: 2013010204594013 Design Standard Description Designed according to IEC 60320-1 Appliance couplers for household and similar general purposes Designed according to IEC 61058-1 Switches for appliances. Part 1. General requirements Designed according to UL 60320-1 Standard for Attachment Plugs and Receptacles Designed according to CSA C22.2 no. 60320-1 General Use Receptacles, Attachment Plugs, and Similar Wiring Devices Design Standard Description Designed for applications acc. IEC/UL 62368-1 Audio/video, information and communication technology equipment - Part 1: Safety requirements Designed for applications acc. IEC 60335-1 Safety of electrical appliances for household and similar purposes. Meets the requirements for appliances in unattended use. This includes the enhanced requirements of glow wire tests acc. to IEC 60695-2-11 or -12 & -13. Details Initiator Description CE declaration of conformity SCHURTER AG The CE marking declares that the product complies with the applicable requirements laid down in the harmonisation of Community legislation on its affixing in accordance with EU Regulation 765/2008. UKCA declaration of conformity SCHURTER AG The UKCA marking declares that the product complies with the applicable requirements laid down in the British Amendment of Regulation (EC) 765/2008. RoHS SCHURTER AG Directive RoHS 2011/65/EU, Amendment (EU) 2015/863 China RoHS SCHURTER AG The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March 2007. It is similar to the EU directive RoHS. REACH SCHURTER AG On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration, Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as "REACH") entered into force. SCHURTER AG V-Lock system are based on a matching plug-dose combination. The connector is equipped with a notch intended for use with the latching cordset. The cord latching system prevents against accidental removal of the cordset. SCHURTER AG Meets the requirements of IEC 60335-1 for appliances in unattended use. This includes the enhanced requirements of glow wire tests acc. to IEC 60695-2-11 or -12 &-13. Product standards Product standards that are referenced Organization Application standards Application standards where the product can be used Organization Compliances The product complies with following Guide Lines Identification White Paper Glow wire test 2 Connectors DC11 Power entry modules without line filter https://www.schurter.com /PG05 Dimensions [mm] Screw-on mounting 27.3 R 2.5 32.3 2.2 R 3.8 34 1) 9.65 31.3 31.15 R6 3.2 6.3x90° R4 9.8 1.35 36 17.9 4.2 27 44 R 2.4 ±0.10 31.6 ±0.10 3.6/M3 2) 27.6 ±0.10 36 ±0.10 1) 1-pol non-illuminated 2) 2-pol illuminated, 2-pol non-illuminated Snap-in mounting 32.3 2.2 R 3.8 31.15 R 2.5 1) 30 1.35 9.65 34 27.3 31.3 R4 9.8 17.9 4.2 S 27 ±0.1 31.6 ±0.10 R 2.4 ±0.10 2) 27.6 ±0.10 1) 1-pol non-illuminated 2) 2-pol illuminated, 2-pol non-illuminated Connectors 3 DC11 Power entry modules without line filter https://www.schurter.com /PG05 Diagrams Line switch non-illuminated 2-pole 1) 2 L 2) PE' PE 1 N 1) Line 2) Load Line switch illuminated 2-pole 1) L Line switch non-illuminated 1-pole 2 PE 2) PE' N 1 1) Line 2) Load 1) 2 L 2) PE' PE 1 N 1) Line 2) Load All Variants Rated Current UL Protection Class Panel mounting Panel Thickness s [mm] Line Switch Illumination Color Order Number 15 I Snap-in 1.5 2-pole l red DC11.0021.201 15 I Snap-in 1.5 2-pole l red DC11.0021.206 15 I Snap-in 2 2-pole l red DC11.0021.301 15 I Snap-in 2.5 2-pole l red DC11.0021.401 15 I Snap-in 1.5 2-pole l green DC11.0031.201 15 I Snap-in 2 2-pole l green DC11.0031.301 15 I Snap-in 2.5 2-pole l green DC11.0031.401 15 I Snap-in 1.5 1-pole - DC11.0001.203 15 I Snap-in 1.5 1-pole - DC11.0001.207 15 I Snap-in 2 1-pole - DC11.0001.303 15 I Snap-in 2.5 1-pole - DC11.0001.403 15 I Snap-in 1.5 2-pole - DC11.0001.201 15 I Snap-in 1.5 2-pole - DC11.0001.206 15 I Snap-in 2 2-pole - DC11.0001.301 15 II Snap-in 2 2-pole - DC11.0001.351 15 I Snap-in 2.5 2-pole - 3-107-445 15 I Snap-in 2.5 2-pole - DC11.0001.401 █ █ █ █ █ 15 I Snap-in 3 2-pole - DC11.0001.501 15 I Screw - 2-pole l red DC11.0021.001 15 I Screw - 2-pole l red DC11.0021.006 15 I Screw - 2-pole l green DC11.0031.001 █ 15 I Screw - 1-pole - DC11.0001.003 █ 15 I Screw - 1-pole - DC11.0001.007 15 I Screw - 2-pole - DC11.0001.001 15 I Screw - 2-pole - DC11.0001.006 █ Most Popular. Availability for all products can be searched real-time:https://www.schurter.com/en/Stock-Check/Stock-Check-SCHURTER With screw mounting on PCB, 2 screws are included All variants according VDE (ENEC 10) approved for 10 A Packaging unit   4 50 Pcs  Connectors █ █ DC11 Power entry modules without line filter https://www.schurter.com /PG05 Accessories Description Wire Harness Wire harness for SCHURTER products   Assorted Covers Rear Cover   0859.0047 4311.9403   RC320 Rear Cover for Power Entry Module   Cord retaining kits Cord retaining strain relief   Flat head, A 4700.0001 Countersunk, B 4700.0002   Mating Outlets/Connectors Category / Description Appliance Outlet Overview complete 4787, Mounting: Screw-on mounting, Appliance Outlet: IEC Solder terminals, 10 A, Suitable for appliances with protection class I 4787 4788, Mounting: Snap-in version, Appliance Outlet: IEC Solder / Quick Connect, 10 A, Suitable for appliances with protection class I 4788 IEC Appliance Outlet F or H, Screw-on Mounting, Front Side, Solder, PCB or Quick-connect Terminal 5091   Connector Overview complete 4782 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4782 4785 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4785 4300-06 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4300-06 4781 Mounting: Power Cord, Cable, Connector: IEC C15 4781 4784 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C15 4784 ...   Connectors 5 DC11 Power entry modules without line filter https://www.schurter.com /PG05 Category / Description Power Supply Cord Overview complete Cord Sets 10 A, Europlug, 2.5 m, Connector IEC C13, H05VV-F3G1.0, black 6004.0215 Cord Sets 10 A, Europlug, 2.5 m, Connector IEC C13, H05VV-F3G1.0, black 6003.0215   Mating Outlets/Connectors shuttered Connector Overview complete 4783 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4783   Power Cord Overview complete VAC13KS, Overview, V-Lock cord retaining, diverse Connector IEC C13, diverse, black VAC13KS VAC17KS, V-Lock cord retaining, diverse m, Connector IEC C17, diverse, black / grey / white VAC17KS 15.09.2021   6 Connectors The specifications, descriptions and illustrations indicated in this document are based on current information. All content is subject to modifications and amendments. Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability and test each product selected for their own applications.