DC12.1132.101

DC12 Power Entry Modules with Line Filter https://www.schurter.com /PG06 IEC Appliance Inlet C14 with Filter, Line Switch 1- or 2-pole, Front or Rear Side Mounting Screw-on mounting from front side, protection class II C14 Screw-on mounting from front side Screw-on mounting from rear side C18 See below: Approvals and Compliances 70° C 70° C Description - Panel mount : Screw-on version from front or rear side, snap-in version front side - 3 Functions : Appliance Inlet protection class I or II , Line Switch 1‑ or 2‑pole , Line filter in standard and medical version - Quick connect terminals 6.3 x 0.8 mm Unique Selling Proposition - Compact power entry module - Available in white or black - Switch for high inrush current - V-Lock cord retaining Characteristics - Compact design with optimal shielding Rear side mounting for efficient costsaving assembly - All single elements are already wired - Line switch non-illuminated or illuminated - Universal line filter for standard applications - Ideal for application with high transient loads - For applications according IEC/UL 62368-1 we recommend variants with bleed resistor Suitable for use in medical equipment according to IEC/UL 60601-1 (1 MOOP, 1 MOPP) Other versions on request - Solder terminals - Other rocker marking - Capacitance CX1 References Alternative: version without line filter   DC11  Substitute for type   KFB1;  KFB2  Weblinks pdf data sheet, html datasheet, General Product Information, Approvals, Distributor-Stock-Check, Accessories, Detailed request for product Newly available variants corresponding to V-Lock mating cordset. The connector is equipped with a notch intended for use with the latching cordset. The cord latching system prevents against accidental removal of the cordset. Technical Data Ratings IEC Ratings UL/CSA Leakage Current Dielectric Strength Allowable Operation Temperature Climatic Category IP-Protection Protection Class Terminal Panel Thickness S Material   1 - 10 A @ Ta 40 °C / 250 VAC; 50 Hz 1 - 10 A @ Ta 40 °C / 250 VAC; 60 Hz standard < 0.5 mA (250 V / 60 Hz) medical < 5 µA (250 V / 60 Hz) > 1.7 kVDC between L-N > 2.7 kVDC between L/N-PE Test voltage (2 sec) -25 °C to 85 °C 25/085/21 acc. to IEC 60068-1 front side IP40 acc. to IEC 60529 Suitable for appliances with protection class I or II acc. to IEC 61140 Quick connect terminals 6.3 x 0.8 mm Screw: max 8 mm Mounting screw torque max 0.5 Nm Snap-in: 1 mm to 3 mm Thermoplastic, black / white, UL 94V-0 Appliance inlet/-outlet Line Switch Line Filter MTBF C14 / C18 acc. to IEC 60320-1, UL 498, CSA C22.2 no. 42 (for cold conditions) pin-temperature 70 °C, 10 A, Protection Class I or II Rocker switch 1-/2-pole, non-illuminated or illuminated, acc. to IEC 61058-1 Technical Details Standard and Medical Version, IEC 60939, UL 1283, CSA C22.2 no. 8 Technical Details > 1'900'000 h acc. to MIL-HB-217 F Approvals and Compliances EMC Products 1 DC12 Power Entry Modules with Line Filter https://www.schurter.com /PG06 Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in  Details about Approvals SCHURTER products are designed for use in industrial environments. They have approvals from independent testing bodies according to national and international standards. Products with specific characteristics and requirements such as required in the automotive sector according to IATF 16949, medical technology according to ISO 13485 or in the aerospace industry can be offered exclusively with customer-specific, individual agreements by SCHURTER. Approvals The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products. Approval Reference Type: DC12 Approval Logo Certificates Certification Body Description VDE Approvals VDE Certificate Number: 40001522 UL Approvals UL UR File Number: E72928 CQC Approvals CQC CQC Certificate Number: CQC18001188116 Design Standard Description Designed according to IEC 60320-1 Appliance couplers for household and similar general purposes Designed according to IEC 60939 Passive filters for suppressing electromagnetic interference Designed according to IEC 61058-1 Switches for appliances. Part 1. General requirements Designed according to UL 498 Standard for Attachment Plugs and Receptacles Designed according to UL 1283 Electromagnetic interference filters Designed according to CSA C22.2 no. 42 General Use Receptacles, Attachment Plugs, and Similar Wiring Devices Designed according to CSA C22.2 no. 8 Electromagnetic interference (EMI) filters Design Standard Description Suitable for applications acc. IEC/UL 62368-1 Audio/video, information and communication technology equipment - Part 1: Safety requirements Suitable for applications acc. IEC 60601-1 Medical electrical equipment - Part 1: General requirements for basic safety and essential performance Suitable for applications acc. IEC 60335-1 Safety of electrical appliances for household and similar purposes. Meets the requirements for appliances in unattended use. This includes the enhanced requirements of glow wire tests acc. to IEC 60695-2-11 or -12 & -13. Product standards Product standards that are referenced Organization Application standards Application standards where the product can be used Organization 2 EMC Products DC12 Power Entry Modules with Line Filter https://www.schurter.com /PG06 Compliances The product complies with following Guide Lines Identification Details Initiator Description CE declaration of conformity SCHURTER AG The CE marking declares that the product complies with the applicable requirements laid down in the harmonisation of Community legislation on its affixing in accordance with EU Regulation 765/2008. UKCA declaration of conformity SCHURTER AG The UKCA marking declares that the product complies with the applicable requirements laid down in the British Amendment of Regulation (EC) 765/2008. RoHS SCHURTER AG Directive RoHS 2011/65/EU, Amendment (EU) 2015/863 China RoHS SCHURTER AG The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March 2007. It is similar to the EU directive RoHS. REACH SCHURTER AG On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration, Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as "REACH") entered into force. SCHURTER AG V-Lock system are based on a matching plug-dose combination. The connector is equipped with a notch intended for use with the latching cordset. The cord latching system prevents against accidental removal of the cordset. White Paper Glow wire test SCHURTER AG Meets the requirements of IEC 60335-1 for appliances in unattended use. This includes the enhanced requirements of glow wire tests acc. to IEC 60695-2-11 or -12 &-13. Medical Equipment SCHURTER AG Suitable for use in medical equipment according to IEC/UL 60601-1 (1 MOOP, 1 MOPP) Dimension [mm] Screw-on mounting from front side 27.2 3 R 2.5 36 ±0.15 1.6 36 9.5 44.3 33.1 ±0.10 3.6/M3 32.70 x28.5 34.4 31.2 R6 3.2 6.3x90° R4 46 5 29.1±0.10 R 3.0 60.5 Snap-in mounting from front side 3 R 5.5 30 32.5 2.65 32.70 x28.5 9.5 31.2 33.1 ±0.10 R 2.5 34 27.2 36.5 R4 9.5 46 5 +0.10 29.4 - 0.05 R 3.0 60.5 EMC Products 3 DC12 Power Entry Modules with Line Filter https://www.schurter.com /PG06 Screw-on mounting from rearside (metal flange) ±0.10 3.6 32.6 x28.5 36.5 36 ±0.15 2.65 9.5 M3 R4 31.2 R 2.5 34 2.2 R5 34.4 27.2 30 R4 9.5 4.2 46.8 36 30.4 ±0.10 R4 60.5 44.3 Screw-on mounting from front side (protection class II) 27.2 3 R 2.5 36 ±0.15 1.6 36 8 46 44.3 33.1 ±0.10 3.6/M3 32.70 x28.5 34.4 31.2 R6 3.2 6.3x90° R4 29.1±0.10 5 R 3.0 59 Screw-on mounting from rearside (protection class II) 34.4 3.6 32.6 x28.5 ±0.10 36 ±0.15 R4 30 2.65 9.5 36.5 R4 M3 34 2.2 R5 31.2 27.2 R 2.5 36 46.8 59 44.3 4 8 EMC Products 4.2 30.4 ±0.10 R4 DC12 Power Entry Modules with Line Filter https://www.schurter.com /PG06 Snap-in mounting from front side (protection class II) 3 R 5.5 30 32.70 x28.5 2.65 9.5 31.2 33.1 ±0.10 R 2.5 34 27.2 36.5 R4 8 46 5 +0.10 29.4 - 0.05 R 3.0 59 32.5 Technical Data of Filter-Components Rated Current [A] Filter-Type Inductances L [mH] Capacitance CX [nF] Capacitance CY [nF] R [MΩ] 1 Standard version 2 x 10 100 2.2 1 2 Standard version 2x4 100 2.2 1 4 Standard version 2 x 1.5 100 2.2 1 6 Standard version 2 x 0.8 100 2.2 1 10 Standard version 2 x 0.3 100 2.2 1 1 Medical Version (M5) 2 x 10 100 - 1 2 Medical Version (M5) 2x4 100 - 1 4 Medical Version (M5) 2 x 1.5 100 - 1 6 Medical Version (M5) 2 x 0.8 100 - 1 10 Medical Version (M5) 2 x 0.3 100 - 1 1 Medical Version (M80) 2 x 10 100 0.47 1 2 Medical Version (M80) 2x4 100 0.47 1 4 Medical Version (M80) 2 x 1.5 100 0.47 1 6 Medical Version (M80) 2 x 0.8 100 0.47 1 10 Medical Version (M80) 2 x 0.3 100 0.47 1 EMC Products 5 DC12 Power Entry Modules with Line Filter https://www.schurter.com /PG06 Diagrams Medical Filter 2-pole (M5) illuminated Standard filter 2-pole illuminated L L L’ L1 1) PE 2) 1) N’ 1) Line 2) Load Medical Version (M5) 2-pole Medical filter 1-pole (M5) L L’ L1 1) PE N’ 1) Line 2) Load Standard filter 2-pole Standard filter 1-pole L L’ L1 PE R Cy Cx L2 Cy N N’ N Medical filter 2-pole (M5) protection class II L’ L1 R Cx 2) L2 N’ N 1) Line 2) Load 6 EMC Products L2 N’ L’ L1 1) Line 2) Load L PE’ Cx 1) PE PE’ 1) Line 2) Load 1) R 2) L 2) N’ L’ N 1) Line 2) Load 1) 2) PE’ L1 1) L2 N Cy L 2) PE’ Cx L2 N 1) Line 2) Load R Cx L2 N PE Cy PE PE’ Cx L’ L1 R Cy Cx L2 Cy 2) PE’ N’ DC12 Power Entry Modules with Line Filter https://www.schurter.com /PG06 Attenuation Loss - - - - 50Ω differential mode _____ 50Ω common mode Standard version 1A 2A 4A 6A 6A 2A 1A 10 A Medical version (M5) 10 A 4A All Variants Rated current Filter-Type Panel mounting Mounting side Line Switch Illumination Color Protection V-Lock Order Number 1 Standard version Snap-in Front Side 1-pole non-illuminated black I l DC12.1102.103 2 Standard version Snap-in Front Side 1-pole non-illuminated black I l DC12.2102.103 4 Standard version Snap-in Front Side 1-pole non-illuminated black I l DC12.3102.103 6 Standard version Snap-in Front Side 1-pole non-illuminated black I l DC12.4102.103 10 Standard version Snap-in Front Side 1-pole non-illuminated black I l DC12.5102.103 1 Standard version Snap-in Front Side 2-pole non-illuminated black I l DC12.1102.101 2 Standard version Snap-in Front Side 2-pole non-illuminated black I l DC12.2102.101 █ 4 Standard version Snap-in Front Side 2-pole non-illuminated black I l DC12.3102.101 █ 6 Standard version Snap-in Front Side 2-pole non-illuminated black I l DC12.4102.101 10 Standard version Snap-in Front Side 2-pole non-illuminated black I l DC12.5102.101 1 Standard version Screw Rear Side 1-pole non-illuminated black I l DC12.1102.203 2 Standard version Screw Rear Side 1-pole non-illuminated black I l DC12.2102.203 4 Standard version Screw Rear Side 1-pole non-illuminated black I l DC12.3102.203 EMC Products 7 DC12 Rated current Power Entry Modules with Line Filter https://www.schurter.com /PG06 Filter-Type Panel mounting Mounting side Line Switch Illumination Color Protection V-Lock Order Number 6 Standard version Screw Rear Side 1-pole non-illuminated black I l DC12.4102.203 10 Standard version Screw Rear Side 1-pole non-illuminated black I l DC12.5102.203 1 Standard version Screw Rear Side 2-pole non-illuminated black I l DC12.1102.201 2 Standard version Screw Rear Side 2-pole non-illuminated black I l DC12.2102.201 4 Standard version Screw Rear Side 2-pole non-illuminated black I l DC12.3102.201 6 Standard version Screw Rear Side 2-pole non-illuminated black I l DC12.4102.201 10 Standard version Screw Rear Side 2-pole non-illuminated black I l DC12.5102.201 1 Standard version Screw Front Side 1-pole non-illuminated black I l DC12.1102.003 2 Standard version Screw Front Side 1-pole non-illuminated black I l DC12.2102.003 4 Standard version Screw Front Side 1-pole non-illuminated black I l DC12.3102.003 6 Standard version Screw Front Side 1-pole non-illuminated black I l DC12.4102.003 10 Standard version Screw Front Side 1-pole non-illuminated black I l DC12.5102.003 1 Standard version Screw Front Side 2-pole non-illuminated black I l DC12.1102.001 2 Standard version Screw Front Side 2-pole non-illuminated black I l DC12.2102.001 █ 4 Standard version Screw Front Side 2-pole non-illuminated black I l DC12.3102.001 █ 6 Standard version Screw Front Side 2-pole non-illuminated black I l DC12.4102.001 █ 10 Standard version Screw Front Side 2-pole non-illuminated black I l DC12.5102.001 █ 1 Medical Version (M5) Snap-in Front Side 1-pole non-illuminated black I l DC12.1202.103 2 Medical Version (M5) Snap-in Front Side 1-pole non-illuminated black I l DC12.2202.103 4 Medical Version (M5) Snap-in Front Side 1-pole non-illuminated black I l DC12.3202.103 6 Medical Version (M5) Snap-in Front Side 1-pole non-illuminated black I l DC12.4202.103 10 Medical Version (M5) Snap-in Front Side 1-pole non-illuminated black I l DC12.5202.103 6 Medical Version (M5) Snap-in Front Side 2-pole illuminated green black I l DC12.4232.101 1 Medical Version (M5) Snap-in Front Side 2-pole non-illuminated black I l DC12.1202.101 1 Medical Version (M5) Snap-in Front Side 2-pole non-illuminated black II l DC12.1202.121 1 Medical Version (M5) Snap-in Front Side 2-pole non-illuminated white II l DC12.1202.131 2 Medical Version (M5) Snap-in Front Side 2-pole non-illuminated black I l DC12.2202.101 2 Medical Version (M5) Snap-in Front Side 2-pole non-illuminated black II l DC12.2202.121 2 Medical Version (M5) Snap-in Front Side 2-pole non-illuminated white II l DC12.2202.131 4 Medical Version (M5) Snap-in Front Side 2-pole non-illuminated black I l DC12.3202.101 4 Medical Version (M5) Snap-in Front Side 2-pole non-illuminated black II l DC12.3202.121 4 Medical Version (M5) Snap-in Front Side 2-pole non-illuminated white II l DC12.3202.131 6 Medical Version (M5) Snap-in Front Side 2-pole non-illuminated black I l DC12.4202.101 6 Medical Version (M5) Snap-in Front Side 2-pole non-illuminated black II l DC12.4202.121 6 Medical Version (M5) Snap-in Front Side 2-pole non-illuminated white II l DC12.4202.131 DC12.5202.101 10 Medical Version (M5) Snap-in Front Side 2-pole non-illuminated black I l 10 Medical Version (M5) Snap-in Front Side 2-pole non-illuminated black II l DC12.5202.121 10 Medical Version (M5) Snap-in Front Side 2-pole non-illuminated white II l DC12.5202.131 1 Medical Version (M5) Screw Rear Side 2-pole non-illuminated black I l DC12.1202.201 2 Medical Version (M5) Screw Rear Side 2-pole non-illuminated black I l DC12.2202.201 4 Medical Version (M5) Screw Rear Side 2-pole non-illuminated black I l DC12.3202.201 6 Medical Version (M5) Screw Rear Side 2-pole non-illuminated black I l DC12.4202.201 10 Medical Version (M5) Screw Rear Side 2-pole non-illuminated black I l DC12.5202.201 1 Medical Version (M5) Screw Front Side 1-pole non-illuminated black I l DC12.1202.003 2 Medical Version (M5) Screw Front Side 1-pole non-illuminated black I l DC12.2202.003 4 Medical Version (M5) Screw Front Side 1-pole non-illuminated black I l DC12.3202.003 6 Medical Version (M5) Screw Front Side 1-pole non-illuminated black I l DC12.4202.003 8 EMC Products █ DC12 Power Entry Modules with Line Filter https://www.schurter.com /PG06 Rated current Filter-Type Panel mounting Mounting side Line Switch Illumination Color Protection V-Lock Order Number 10 Medical Version (M5) Screw Front Side 1-pole non-illuminated black I l DC12.5202.003 1 Medical Version (M5) Screw Front Side 2-pole non-illuminated black I l DC12.1202.001 1 Medical Version (M5) Screw Front Side 2-pole non-illuminated black II l DC12.1202.021 1 Medical Version (M5) Screw Front Side 2-pole non-illuminated white II l DC12.1202.031 2 Medical Version (M5) Screw Front Side 2-pole non-illuminated black I l DC12.2202.001 2 Medical Version (M5) Screw Front Side 2-pole non-illuminated black II l DC12.2202.021 2 Medical Version (M5) Screw Front Side 2-pole non-illuminated white II l DC12.2202.031 4 Medical Version (M5) Screw Front Side 2-pole non-illuminated black I l DC12.3202.001 4 Medical Version (M5) Screw Front Side 2-pole non-illuminated black II l DC12.3202.021 4 Medical Version (M5) Screw Front Side 2-pole non-illuminated white II l DC12.3202.031 6 Medical Version (M5) Screw Front Side 2-pole non-illuminated black I l DC12.4202.001 6 Medical Version (M5) Screw Front Side 2-pole non-illuminated black II l DC12.4202.021 6 Medical Version (M5) Screw Front Side 2-pole non-illuminated white II l DC12.4202.031 DC12.5202.001 10 Medical Version (M5) Screw Front Side 2-pole non-illuminated black I l 10 Medical Version (M5) Screw Front Side 2-pole non-illuminated black II l DC12.5202.021 10 Medical Version (M5) Screw Front Side 2-pole non-illuminated white II l DC12.5202.031 1 Medical Version (M80) Screw Rear Side 2-pole non-illuminated black I l DC12.1602.201 2 Medical Version (M80) Screw Rear Side 2-pole non-illuminated black I l DC12.2602.201 4 Medical Version (M80) Screw Rear Side 2-pole non-illuminated black I l DC12.3602.201 6 Medical Version (M80) Screw Rear Side 2-pole non-illuminated black I l DC12.4602.201 10 Medical Version (M80) Screw Rear Side 2-pole non-illuminated black I l DC12.5602.201 █ Most Popular. Availability for all products can be searched real-time:https://www.schurter.com/en/Stock-Check/Stock-Check-SCHURTER Packaging unit  10 Pcs  Accessories Description Wire_Harness Wire harness for SCHURTER products   RC320 Rear Cover for Power Entry Module   EMC Products 9 DC12 Power Entry Modules with Line Filter https://www.schurter.com /PG06 Cord_retaining_kits Cord retaining strain relief   Flat head, A 4700.0001 Countersunk, B 4700.0002   Mating Outlets/Connectors Category / Description Connector Overview complete 4782 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4782 4785 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4785 4300-06 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4300-06 4781 Mounting: Power Cord, Cable, Connector: IEC C15 4781 4784 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C15 4784   Interconnection Cord Overview complete Cord Sets 10 A, Interconnection, 1.0 m, Connector IEC C13, H05VV-F3G1.0, black 6007.0212 Cord Sets 10 A, Interconnection, 2.0 m, Connector IEC C13, H05VV-F3G1.0, black 6007.0214   Power Supply Cord Overview complete Cord Sets 10 A, Europlug, 2.0 m, Connector IEC C13, H05VV-F3G0.75, black 6004.0114 Cord Sets 10 A, Europlug, 2.5 m, Connector IEC C13, H05VV-F3G1.0, black 6004.0215 Cord Sets 10 A, Europlug, 2.5 m, Connector IEC C13, H05VV-F3G1.0, black 6003.0215 Cord Sets 10 A, Europlug, Black, 2.5 m, H05VV-F 3G1,0mm2, Connector IEC C13, H05VV-F3G1.0, black 6004.0225 Cord Sets 10 A, diverse, Black, 5.0 m, H05VV-F 3G1,0mm2, Connector IEC C13, H05VV-F3G1.0, black 6052.0026 ...   Mating Outlets/Connectors shuttered Connector Overview complete 4783 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4783   Power Cord Overview complete VAC13KS VAC17KS, V-Lock cord retaining, diverse m, Connector IEC C17, diverse, black / grey / white VAC17KS 15.08.2023 VAC13KS, Overview, V-Lock cord retaining, diverse Connector IEC C13, diverse, black   10 EMC Products The specifications, descriptions and illustrations indicated in this document are based on current information. All content is subject to modifications and amendments. Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability and test each product selected for their own applications.