DC22
Power Entry Modules with Line Filter
https://www.schurter.com /PG06
IEC Appliance Inlet C14 with Filter, Line Switch 1- or 2-pole, PCB Mounting
C14
See below:
Approvals and Compliances
70° C
Description
- Panel mount :
Screw-on mounting on PCB rear-side
- 3 Functions :
Appliance Inlet Protection class I , Line Switch 1‑ or 2‑pole , Line filter
in standard and medical version
- For PCB mounting
Characteristics
- Ultra-compact design
- All single elements are already wired
- Line switch non-illuminated or illuminated
- With EMC-shield
- Especially suitable for use in switching power supplies
Ideal for application with high transient loads
- For applications according IEC/UL 62368-1 we recommend variants
with bleed resistor
Suitable for use in medical equipment according to IEC/UL 60601-1 (1
MOOP, 1 MOPP)
Other versions on request
- Fixing on PCB with self-tapping screws 3 mm or pre-inserted nuts M3
- Other rocker marking
- Illuminated green
- Medical Version (M80)
- Capacitance CX1
References
Alternative: version without line filter DC21
Alternative: Standard version DC21
Weblinks
pdf data sheet, html datasheet, General Product Information, Approvals,
Distributor-Stock-Check, Accessories, Detailed request for product
Newly available variants corresponding to V-Lock mating cordset. The connector is equipped with a notch intended for use with the latching cordset.
The cord latching system prevents against accidental removal of the cordset.
Technical Data
Ratings IEC
Ratings UL/CSA
Leakage Current
Dielectric Strength
Allowable Operation Temperature
Climatic Category
IP-Protection
Protection Class
Terminal
Panel Thickness S
Material
1 - 10 A @ Ta 40 °C / 250 VAC; 50 Hz
1 - 10 A @ Ta 40 °C / 250 VAC; 60 Hz
standard < 0.5 mA (250 V / 60 Hz)
medical < 5 µA (250 V / 60 Hz)
> 1.7 kVDC between L-N
> 2.7 kVDC between L/N-PE
Test voltage (2 sec)
-25 °C to 85 °C
25/085/21 acc. to IEC 60068-1
front side IP40 acc. to IEC 60529
Suitable for appliances with protection
class I acc. to IEC 61140
For PCB mounting : Ground terminal:
Quick connect terminals 6.3 x 0.8 mm
angled to pin axis
Screw: max 4 mm
Mounting screw torque max 0.5 Nm
Thermoplastic, black, UL 94V-0
Appliance inlet/-outlet
Line Switch
Line Filter
MTBF
C14 acc. to IEC 60320-1,
UL 498 CSA C22.2 no. 42 (for cold
conditions) pin-temperature 70 °C, 10 A,
Protection Class I
Rocker switch 1-/2-pole, non-illuminated or illuminated red, acc. to IEC
61058-1
Technical Details
Standard and Medical Version, IEC
60939, UL 1283, CSA C22.2 no. 8
Technical Details
> 2'100'000 h acc. to MIL-HB-217 F
Approvals and Compliances
EMC Products
1
DC22
Power Entry Modules with Line Filter
https://www.schurter.com /PG06
Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about
Approvals
SCHURTER products are designed for use in industrial environments. They have approvals from independent testing bodies according to national
and international standards. Products with specific characteristics and requirements such as required in the automotive sector according to IATF
16949, medical technology according to ISO 13485 or in the aerospace industry can be offered exclusively with customer-specific, individual agreements by SCHURTER.
Approvals
The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products.
Approval Reference Type: DC22
Approval Logo
Certificates
Certification Body
Description
VDE Approvals
VDE
Certificate Number: 40001522
UL Approvals
UL
UR File Number: E72928
Design
Standard
Description
Designed according to
IEC 60320-1
Appliance couplers for household and similar general purposes
Designed according to
IEC 60939
Passive filters for suppressing electromagnetic interference
Designed according to
IEC 61058-1
Switches for appliances. Part 1. General requirements
Designed according to
UL 498
Standard for Attachment Plugs and Receptacles
Designed according to
UL 1283
Electromagnetic interference filters
Designed according to
CSA C22.2 no. 42
General Use Receptacles, Attachment Plugs, and Similar Wiring Devices
Designed according to
CSA C22.2 no. 8
Electromagnetic interference (EMI) filters
Design
Standard
Description
Suitable for applications acc.
IEC/UL 62368-1
Audio/video, information and communication technology equipment - Part
1: Safety requirements
Suitable for applications acc.
IEC 60601-1
Medical electrical equipment - Part 1: General requirements for basic
safety and essential performance
Details
Initiator
Description
CE declaration of conformity
SCHURTER AG
The CE marking declares that the product complies with the applicable
requirements laid down in the harmonisation of Community legislation on
its affixing in accordance with EU Regulation 765/2008.
UKCA declaration of conformity
SCHURTER AG
The UKCA marking declares that the product complies with the applicable
requirements laid down in the British Amendment of Regulation (EC)
765/2008.
RoHS
SCHURTER AG
Directive RoHS 2011/65/EU, Amendment (EU) 2015/863
China RoHS
SCHURTER AG
The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March
2007. It is similar to the EU directive RoHS.
REACH
SCHURTER AG
On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration,
Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as
"REACH") entered into force.
SCHURTER AG
V-Lock system are based on a matching plug-dose combination. The
connector is equipped with a notch intended for use with the latching
cordset. The cord latching system prevents against accidental removal of
the cordset.
SCHURTER AG
Suitable for use in medical equipment according to IEC/UL 60601-1 (1
MOOP, 1 MOPP)
Product standards
Product standards that are referenced
Organization
Application standards
Application standards where the product can be used
Organization
Compliances
The product complies with following Guide Lines
Identification
Medical Equipment
2
EMC Products
DC22
Power Entry Modules with Line Filter
https://www.schurter.com /PG06
Dimension [mm]
Screw-on mounting
57.6
46.8
5.8
39
R4
47.6
4.2
2.2
R 5.1
30
L
1)
1.25
34.4 ±0.10
3.6
2.8
3.95
PE
4.5
N
2.5
10.5
32.5
37.6
34
6.05
19.5
R4.2 ±0.05
32.7
8.1
30.4 ±0.10
0.85
4.3
39 ±0.15
47.05
16.2
1) all pins
6.05 ±0.10
38
6.6
2)
41
.4
28.4
16.2 ±0.15
R4
3.4
38 ±0.20
L
N
32.7 ±0.20
PE
1.6
+0.10
0
1.6
+0.10
0
3.6
2) PE additionally as quick-connect terminal 6.3 x 0.8
Technical Data of Filter-Components
Rated Current
[A]
Filter-Type
Inductances
L [mH]
Capacitance
CX [nF]
Capacitance
CY [nF]
R [MΩ]
1
Standard version
2 x 10
100
2.2
1
2
Standard version
2x4
100
2.2
1
4
Standard version
2 x 1.5
100
2.2
1
6
Standard version
2 x 0.8
100
2.2
1
10
Standard version
2 x 0.3
100
2.2
1
1
Medical Version (M5)
2 x 10
100
-
1
2
Medical Version (M5)
2x4
100
-
1
4
Medical Version (M5)
2 x 1.5
100
-
1
6
Medical Version (M5)
2 x 0.8
100
-
1
10
Medical Version (M5)
2 x 0.3
100
-
1
EMC Products
3
DC22
Power Entry Modules with Line Filter
https://www.schurter.com /PG06
Diagrams
Medical Filter 2-pole (M5)
illuminated
Standard filter 2-pole
illuminated
L
L
L’
L1
1)
PE
2)
1)
Cy
PE
PE’
Cx
L’
L1
Cx
L2
N’
N
1) Line
2) Load
1) Line
2) Load
Medical Version (M5)
2-pole
Medical filter 1-pole (M5)
L
L’
L1
1)
PE
R
L’
PE
N’
R
Standard filter 2-pole
Standard filter 1-pole
L’
L1
PE
R
Cy
Cx
L2
N
1) Line
2) Load
Cy
L’
L1
1)
PE
N’
R
Cy
Cx
N
Attenuation Loss
Cy
PE’
N’
- - - - 50Ω differential mode _____ 50Ω common mode
2A
10 A
4
L2
2)
1) Line
2) Load
Standard version
1A
L2
L
2)
PE’
PE’
Cx
N’
1) Line
2) Load
L
2)
N
1) Line
2) Load
1)
N’
L1
1)
L2
N
Cy
L
2)
PE’
Cx
L2
N
2)
PE’
EMC Products
4A
6A
DC22
Power Entry Modules with Line Filter
https://www.schurter.com /PG06
Medical version (M5)
10 A
6A
2A
1A
4A
All Variants
Rated current
Filter-Type
Line Switch
Illumination
Color
Weight [g]
V-Lock
Order Number
1
Standard version
1-pole
-
67 g
l
DC22.1111.111
2
Standard version
1-pole
-
67 g
l
DC22.2111.111
4
Standard version
1-pole
-
67 g
l
DC22.4111.111
6
Standard version
1-pole
-
67 g
l
DC22.6111.111
10
Standard version
1-pole
-
67 g
l
DC22.9111.111
1
Standard version
2-pole
-
67 g
l
DC22.1121.111
2
Standard version
2-pole
-
67 g
l
DC22.2121.111
4
Standard version
2-pole
-
67 g
l
DC22.4121.111
6
Standard version
2-pole
-
67 g
l
DC22.6121.111
DC22.9121.111
10
Standard version
2-pole
-
67 g
l
1
Standard version
2-pole
l
red
67 g
l
DC22.1123.111
2
Standard version
2-pole
l
red
67 g
l
DC22.2123.111
4
Standard version
2-pole
l
red
67 g
l
DC22.4123.111
6
Standard version
2-pole
l
red
67 g
l
DC22.6123.111
10
Standard version
2-pole
l
red
67 g
l
DC22.9123.111
DC22.1221.111
1
Medical Version (M5)
2-pole
-
67 g
l
2
Medical Version (M5)
2-pole
-
67 g
l
DC22.2221.111
4
Medical Version (M5)
2-pole
-
67 g
l
DC22.4221.111
6
Medical Version (M5)
2-pole
-
67 g
l
DC22.6221.111
10
Medical Version (M5)
2-pole
-
67 g
l
DC22.9221.111
1
Medical Version (M5)
2-pole
l
red
67 g
l
DC22.1223.111
2
Medical Version (M5)
2-pole
l
red
67 g
l
DC22.2223.111
DC22.4223.111
4
Medical Version (M5)
2-pole
l
red
67 g
l
6
Medical Version (M5)
2-pole
l
red
67 g
l
DC22.6223.111
10
Medical Version (M5)
2-pole
l
red
67 g
l
DC22.9223.111
Availability for all products can be searched real-time:https://www.schurter.com/en/Stock-Check/Stock-Check-SCHURTER
Packaging unit
10 Pcs
EMC Products
5
DC22
Power Entry Modules with Line Filter
https://www.schurter.com /PG06
Accessories
Description
Cord_retaining_kits
Cord retaining strain relief
Flat head, H
4700.0008
Mating Outlets/Connectors
Category / Description
Appliance Outlet Overview complete
4787, Mounting: Screw-on mounting, Appliance Outlet: IEC Solder terminals, 10 A, Suitable for appliances with protection class I
4787
4788, Mounting: Snap-in version, Appliance Outlet: IEC Solder / Quick Connect, 10 A, Suitable for appliances with
protection class I
4788
IEC Appliance Outlet F or H, Screw-on Mounting, Front Side, Solder, PCB or Quick-connect Terminal
5091
Connector Overview complete
4782 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13
4782
4785 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13
4785
4300-06 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13
4300-06
4781 Mounting: Power Cord, Cable, Connector: IEC C15
4781
4784 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C15
4784
Mating Outlets/Connectors shuttered
Connector Overview complete
4783 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13
4783
Power Cord Overview complete
VAC13KS, Overview, V-Lock cord retaining, diverse Connector IEC C13, diverse, black
VAC13KS
15.08.2023
6
EMC Products
The specifications, descriptions and illustrations indicated in this document are based on current
information. All content is subject to modifications and amendments. Information furnished is believed
to be accurate and reliable. However, users should independently evaluate the suitability and test each
product selected for their own applications.
