DLFL-0147-16D3

DLFL Suppression Chokes https://www.schurter.com /PG81_82 Linear/Saturating Choke See below: Approvals and Compliances Description - Linear/saturating choke - THT-terminals - Low noise development by using iron powder toroids instead of conventional iron lamination cores - Flange for mounting onto printed circuit board - Fully potted resign Technical Data Applications - Phase angle control circuits with thyristors, triacs or transistors - The choke acts at its optimum when it is mounted directly at the interference originator (thyristor, triac) Weblinks pdf data sheet, html datasheet, General Product Information, Approvals, Distributor-Stock-Check, Detailed request for product   Rated voltage Rated Current Power Operating Frequency Terminal Type Weight Material Sealing Compound up to 440 VAC 5 - 45 A @ Ta 45 °C 50 Hz THT, Flexible wire 144 - 1423 g UL 94V-0  UL 94V-0  Isolation Voltage Climatic Category Allowable Operation Temp. 2 kV eff., winding to ambient 25/100/21 acc. to IEC 60068-1 -25 °C to 100 °C Approvals and Compliances Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in  Details about Approvals SCHURTER products are designed for use in industrial environments. They have approvals from independent testing bodies according to national and international standards. Products with specific characteristics and requirements such as required in the automotive sector according to IATF 16949, medical technology according to ISO 13485 or in the aerospace industry can be offered exclusively with customer-specific, individual agreements by SCHURTER. Application standards Application standards where the product can be used Organization Design Standard Description Suitable for applications acc. IEC/UL 62368-1 Audio/video, information and communication technology equipment - Part 1: Safety requirements Details Initiator Description CE declaration of conformity SCHURTER AG The CE marking declares that the product complies with the applicable requirements laid down in the harmonisation of Community legislation on its affixing in accordance with EU Regulation 765/2008. UKCA declaration of conformity SCHURTER AG The UKCA marking declares that the product complies with the applicable requirements laid down in the British Amendment of Regulation (EC) 765/2008. RoHS SCHURTER AG Directive RoHS 2011/65/EU, Amendment (EU) 2015/863 China RoHS SCHURTER AG The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March 2007. It is similar to the EU directive RoHS. REACH SCHURTER AG On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration, Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as "REACH") entered into force. Compliances The product complies with following Guide Lines Identification EMC Products 1 DLFL Suppression Chokes https://www.schurter.com /PG81_82 Dimension [mm] Case 25-P Case 47-P 30.8 50 8 50 45.8 2.5 40 3.5 28 5.8 35 1) 4.8 28 1) 32 40 2.5 32 40 40 8 3.5 1) (0.8) 35 10 1) (0.8) 10 Case 32-P 80 70.8 4 6.8 56 1) 65 65 80 12 4.5 56 1) (0.8) 10 1) Spacing given at pin base % of nominal current Derating Curves Allowed current versus ambient temperature All Variants In [A] Ln [mH] Inductance drop max [%] Rcu [mΩ] Tripped Power Dissipation fRES [MHz] Cx [µF] Copper ø [mm] Weight [g] Housing Packing unit [pcs.] Order Number 5 1 60 120 3 0.8 0.047 1 144 g 25-P 20 DLFL-0125-0501 8 0.5 60 54 3.5 1.32 0.1 1.25 154 g 25-P 20 DLFL-0125-08D5 12 0.5 60 38 5.5 1.16 0.1 1.7 333 g 47-P 10 DLFL-0147-12D5 16 0.3 60 25 6.4 1.69 0.22 1.8 325 g 47-P 10 DLFL-0147-16D3 25 0.15 60 10 6.3 2.5 0.47 2.36 336 g 47-P 10 DLFL-0147-25D2 2 EMC Products █ █ DLFL Suppression Chokes https://www.schurter.com /PG81_82 In [A] Ln [mH] Inductance drop max [%] Rcu [mΩ] Tripped Power Dissipation 35 45 fRES [MHz] Cx [µF] Copper ø [mm] 0.05 60 5.3 0.2 70 6 6.5 3.5 1.5 1.5 x 4.5 12 1.1 1 2x5 Weight [g] Housing Packing unit [pcs.] Order Number 338 g 47-P 10 DLFL-0147-35C5 1423 g 32-P 2 DLFL-0132-45D2 █ Most Popular. Availability for all products can be searched real-time:https://www.schurter.com/en/Stock-Check/Stock-Check-SCHURTER 16.08.2023 Inductance drop at In The specifications, descriptions and illustrations indicated in this document are based on current information. All content is subject to modifications and amendments. Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability and test each product selected for their own applications. EMC Products 3