EC12.2201.001

EC12 Power Entry Modules with Line Filter https://www.schurter.com /PG06 IEC Appliance Inlet C20 with Filter, Line Switch 2-pole C20 See below: Approvals and Compliances 70° C Description - Panel mount : Snap-in or screw-on mounting front side - 3 Functions : Appliance Inlet Protection class I , Line Switch 2-pole , Line filter in standard and medical version - Quick connect terminals 6.3 x 0.8 mm Unique Selling Proposition - Compact size - Switch for highest inrush current - Optional with enhanced surge withstand voltage - V-Lock cord retaining Characteristics - All single elements are already wired - Line switch non-illuminated - With EMC-shield - Ideal for application with high transient loads - For applications according IEC/UL 62368-1 we recommend variants with bleed resistor Suitable for use in medical equipment according to IEC/UL 60601-1 (1 MOOP, 1 MOPP) Other versions on request - Line switch, illuminated - Line switch with other rocker marking - Variant with notch for V-Lock mating Cordsets References Alternative: version without line filter   EC11  Alternative: Standard version   Weblinks pdf data sheet, html datasheet, General Product Information, Approvals, Distributor-Stock-Check, Accessories, Detailed request for product Newly available variants corresponding to V-Lock mating cordset. The connector is equipped with a notch intended for use with the latching cordset. The cord latching system prevents against accidental removal of the cordset. Technical Data Ratings IEC Ratings UL/CSA Leakage Current Dielectric Strength Allowable Operation Temperature Climatic Category IP-Protection Protection Class Terminal Panel Thickness S Material   12 - 16 A @ Ta 40 °C / 250 VAC; 50 Hz 12 - 20 A @ Ta 40 °C / 250 VAC; 60 Hz standard < 0.5 mA (250 V / 60 Hz) medical < 5 µA (250 V / 60 Hz) > 1.7 kVDC between L-N > 2.7 kVDC between L/N-PE Test voltage (2 sec) -25 °C to 85 °C 25/085/21 acc. to IEC 60068-1 front side IP40 acc. to IEC 60529 Suitable for appliances with protection class I acc. to IEC 61140 Quick connect terminals 6.3 x 0.8 mm Screw: max 8 mm Mounting screw torque max 0.5 Nm Thermoplastic, black, UL 94V-0 Appliance inlet/-outlet Line Switch Line Filter MTBF C20 acc. to IEC 60320-1, UL 498, CSA C22.2 no. 42 (for cold conditions) pin-temperature 70 °C, 16 A, Protection Class I Rocker switch 2-pole, non-illuminated, acc. to IEC 61058-1 Technical Details Standard and Medical Version, IEC 60939, UL 1283, CSA C22.2 no. 8 Technical Details > 1'700'000 h acc. to MIL-HB-217 F Approvals and Compliances EMC Products 1 EC12 Power Entry Modules with Line Filter https://www.schurter.com /PG06 Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in  Details about Approvals SCHURTER products are designed for use in industrial environments. They have approvals from independent testing bodies according to national and international standards. Products with specific characteristics and requirements such as required in the automotive sector according to IATF 16949, medical technology according to ISO 13485 or in the aerospace industry can be offered exclusively with customer-specific, individual agreements by SCHURTER. Approvals The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products. Approval Reference Type: EC12 Approval Logo Certificates Certification Body Description VDE Approvals VDE Certificate Number: 40001522 UL Approvals UL UR File Number: E72928 CQC Approvals CQC CQC Certificate Number: CQC21001327399 Design Standard Description Designed according to IEC 60320-1 Appliance couplers for household and similar general purposes Designed according to IEC 60939 Passive filters for suppressing electromagnetic interference Designed according to IEC 61058-1 Switches for appliances. Part 1. General requirements Designed according to UL 498 Standard for Attachment Plugs and Receptacles Designed according to UL 1283 Electromagnetic interference filters Designed according to CSA C22.2 no. 42 General Use Receptacles, Attachment Plugs, and Similar Wiring Devices Designed according to CSA C22.2 no. 8 Electromagnetic interference (EMI) filters Design Standard Description Suitable for applications acc. IEC/UL 62368-1 Audio/video, information and communication technology equipment - Part 1: Safety requirements Suitable for applications acc. IEC 60601-1 Medical electrical equipment - Part 1: General requirements for basic safety and essential performance Product standards Product standards that are referenced Organization Application standards Application standards where the product can be used Organization 2 EMC Products EC12 Power Entry Modules with Line Filter https://www.schurter.com /PG06 Compliances The product complies with following Guide Lines Identification Details Initiator Description CE declaration of conformity SCHURTER AG The CE marking declares that the product complies with the applicable requirements laid down in the harmonisation of Community legislation on its affixing in accordance with EU Regulation 765/2008. UKCA declaration of conformity SCHURTER AG The UKCA marking declares that the product complies with the applicable requirements laid down in the British Amendment of Regulation (EC) 765/2008. RoHS SCHURTER AG Directive RoHS 2011/65/EU, Amendment (EU) 2015/863 China RoHS SCHURTER AG The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March 2007. It is similar to the EU directive RoHS. REACH SCHURTER AG On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration, Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as "REACH") entered into force. SCHURTER AG V-Lock system are based on a matching plug-dose combination. The connector is equipped with a notch intended for use with the latching cordset. The cord latching system prevents against accidental removal of the cordset. SCHURTER AG Suitable for use in medical equipment according to IEC/UL 60601-1 (1 MOOP, 1 MOPP) Medical Equipment Dimension [mm] EC12 68 R6 .5 32.3 37 32.9 57 2. R 64.8 8 3.3 46.2 6.4 59.5 9.5 Panel cut-out 55 3. R 5 .0 ±0 47.05 48 ±0.10 2.8 31.1 3.6/M3 33.9 ±0.10 5.3 57 ±0.10 EMC Products 3 EC12 Power Entry Modules with Line Filter https://www.schurter.com /PG06   Panel thickness 1.0 - 3.0 mm .7 32.3 R4 37 32.9 46.2 8 2. R 51 64.8 Panel cut-out 59.5 5.3 48±0.10 9.5 .05 47.05 2.8 33.9±0.10 5±0 .5 R3 31.1 Technical Data of Filter-Components Rated Current [A] Filter-Type Inductances L [mH] Capacitance CX [nF] Capacitance CY [nF] R [MΩ] 12 Standard version 2 x 0.8 100 2.2 1 16 Standard version 2 x 0.6 100 2.2 1 20 Standard version 2 x 0.3 100 2.2 1 12 Medical Version (M5) 2 x 0.8 100 - 1 16 Medical Version (M5) 2 x 0.6 100 - 1 20 Medical Version (M5) 2 x 0.3 100 - 1 Diagrams Medical Version (M5) Standard version L L’ L1 1) PE Cx PE’ R N’ 1) Line 2) Load PE N 1) Line 2) Load EMC Products L’ L1 1) L2 N 4 L 2) Cx Cy R L2 Cy 2) PE’ N’ EC12 Power Entry Modules with Line Filter https://www.schurter.com /PG06 Attenuation Loss - - - - 50Ω differential mode _____ 50Ω common mode Standard version 20 A 16 A 12 A 16 A 12 A Medical version (M5) 20 A All Variants Rated Current [A] Filter-Type Panel mounting Internally wired Line Switch V-Lock Order Number 16 Standard version Snap-in l 2-pole 3-136-814 20 Standard version Snap-in l 2-pole 3-136-812 12 Standard version Screw l 2-pole EC12.3101.001 █ 12 Standard version Screw l 2-pole 16 Standard version Screw l 2-pole EC12.2101.001 █ 20 Standard version Screw l 2-pole EC12.1101.001 █ 12 Standard version Screw 2-pole EC12.3101.002 l EC12.3101.001.21 16 Standard version Screw 2-pole EC12.2101.002 20 Standard version Screw 2-pole EC12.1101.002 16 Medical Version (M5) Snap-in l 2-pole 3-136-815 20 Medical Version (M5) Snap-in l 2-pole 3-136-813 12 Medical Version (M5) Screw l 2-pole EC12.3201.001 16 Medical Version (M5) Screw l 2-pole EC12.2201.001 16 Medical Version (M5) Screw l 2-pole 20 Medical Version (M5) Screw l 2-pole l EC12.2201.001.21 EC12.1201.001 12 Medical Version (M5) Screw 2-pole EC12.3201.002 16 Medical Version (M5) Screw 2-pole EC12.2201.002 20 Medical Version (M5) Screw 2-pole EC12.1201.002 █ Most Popular. Availability for all products can be searched real-time:https://www.schurter.com/en/Stock-Check/Stock-Check-SCHURTER Packaging unit  20 Pcs  EMC Products 5 EC12 Power Entry Modules with Line Filter https://www.schurter.com /PG06 Accessories Description Wire_Harness Wire harness for SCHURTER products   Assorted_Covers Rear Cover   0859.0108   RC320 Rear Cover for Power Entry Module   Cord_retaining_kits Cord retaining strain relief   Flat head, H 4700.0008   Mating Outlets/Connectors Category / Description Connector Overview complete 4795, Mounting: Power Cord, Cable Connector: IEC C19 4795 4790, Mounting: Power Cord, Screw Connector: IEC C19 4790 0104U, Mounting: Power Supply Cord, Screw clamps Connector: IEC C19 0104U   Mating Outlets/Connectors shuttered Power Cord Overview complete VAC19KS 15.08.2023 VAC19KS, Overview, V-Lock cord retaining, diverse Connector IEC C19, diverse, black   6 EMC Products The specifications, descriptions and illustrations indicated in this document are based on current information. All content is subject to modifications and amendments. Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability and test each product selected for their own applications.