FAS

Fuseholders www.schurter.com/pg02 Shock-Safe Fuseholder, 5 x 20 mm, Fingergrip, horizontal, PC1 FAS Fingergrip 250 VAC · 1.6 W / 6.3 A Description Standards - Shocksafe Category PC1 - IEC 60127-6 References Weblinks General Product Information Approvals, RoHS, CHINA-RoHS, e-Store, Distributor-Stock-Check, Accessories, Product Change Notification (PCN) Technical Data Shocksafe Category Fuse-Link Mounting Terminal Rated Voltage Rated Current Rated Power Acceptance IEC PC1 5 x 20 mm PCB Solder THT 250 VAC 6.3 A 1.6 W / 6.3 A @ Ta 23 °C Admissible power acceptance at higher ambient temperature see derating curves Degree of Protection IP 40 Protection Class Suitable for appliances with protection class 1 or 2 acc. to IEC 61140 Admissible Ambient Air Temp. -40 °C to 85 °C Climatic Category 40/085/21 acc. to IEC 60068-1 Material: Socket Thermoplastic, UL 94V-0 Material: Cap Thermoset, UL 94V-0 Material: Terminals Tin-Plated Copper Alloy Unit Weight (Socket/Cap) 4.7 g Storage Conditions 0 °C to 60 °C, max. 70% r.h. Product Marking , Voltage, Current, Approvals Soldering Methods Solderability Resistance to Soldering Heat Contact Resistance Dielectric Strength Impulse Withstand Voltage Insulation Resistance Overvoltage Category Pollution Degree Wave 235 °C / 2 sec acc. to IEC 60068-2-20, Test Ta, method 1 260 °C / 10 sec acc. to IEC 60068-2-20, Test Tb, method 1A < 5 mΩ at 20 mV > 3 kV between L-N (50 Hz; 1 min) > 4 kV between L-N > 10 MΩ between L-N (500 VDC; 1 min) I - III acc. to IEC 60664-1 1 - 3 acc. to IEC 60664-1 Abmessungen   31 mm 31 84 12 ±0.2 6 1.3 +0.1 0 ø 9.5 10 -0.2 5.2 0.2 12.5 +0 5 5.25 1.2 12.5 ±0.1 0 Drilling diagram Fuses  FAS www.schurter.com/pg02 Derating Curves for Fuseholders Admissible power acceptance in Watt 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0.0 0 20 40 60 80 100 I = 1.0 In I = 0.7 In I = < < In Fuseholders Ambient air temperature Ta °C Variants Holder l Cap Slot Knob Terminal Straight Degree of Protection IP 40 Order Number 0031.3501 Packaging Unit Bulk (100 pcs.) 2 The specifications, descriptions and illustrations indicated in this document are based on Fuses current information. All content is subject to modifications and amendments.