FSS

-Phase Line Filters www.schurter.com/pg06_ AC Filter 2-Stage, Very High Symmetrical Attenuation FSS Description - Chassis: Screw-on mounting, from top - Line-filter in standard version, 2 positions, very high attenuation, broadband - Quick connect terminals 6.3 x 0.8 mm or screw terminals - Especially effective against symmetrical interferences in the frequency range from 10kHz up to 30MHz Approvals - Designed for increased requirements - 2-stage line filter with increased attenuation Protection against interference voltage from the mains Possible interferences generated in the equipment are strongly attenuated - Especially suitable for use in switching power supplies e.g. in electronic designs with high repetitive switching frequency - Qualified for use in equipment according IEC/EN 60950 Characteristics - VDE License Number: 40004673 - UL License Number: E72928 References Weblinks General Product Information Approvals, RoHS, CHINA-RoHS, Mating Connectors, e-Store, Distributor-Stock-Check, Accessories Technical Data Ratings IEC Ratings UL/CSA Leakage Current Dielectric Strength 1 - 16 A @ Ta 40 °C / 250 VAC; 50 Hz 1 - 16 A @ Ta 40 °C / 125 VAC; 60 Hz industrial < 1.4 mA (250 V / 60 Hz) > 1.7 kVDC between L-N > 2.7 kVDC between L/N-PE Test voltage (2 sec) -25 °C to 100 °C 25/100/21 acc. to IEC 60068-1 Suitable for appliances with protection class 1 acc. to IEC 61140 Quick connect terminals 6.3 x 0.8 mm or screw terminals Alu. anodised Line Filter Standard and Industrial Version, IEC 60939, IEC 60601-1, UL 1283, UL 544, EN 133 200, CSA C22.2 no. 8 Technical details > 200'000 h acc. to MIL-HB-217 F MTBF Allowable Operation Temp. Climatic Category Protection Class Terminal Material: Housing EMC Products  FSS www.schurter.com/pg06_ Dimensions Case 10 Case 19 -Phase Line Filters max. 81 max. 56 6.3x0.8 max. 33 (26.5) max. 112 max. 87 max. 49 (36) (23) 5.3x8.8 (27) (12) 6.3x0.8 43 max. (3.5) (20) 5.3 (27) (12) max. 53 max. 57 48 ±0.3 (20) 1) 2) max. 41 1) 2) 3.8 ±0.2 (11.5) 101 ±0.8 max. 115 1) Line 2) Load 1) Line 2) Load Case 27 Case 48 max. 173 max. 151 max. 56 (5) 91 max. 4 mm² 66 max. max. 101 max. 127 51 max. 1) 2) 111.5 ±0.5 1) 2) 75 ±0.3 6.5 ±0.3 85 ±0.3 1) Line 2) Load 1) Line 2) Load Diagrams Standard version 1) Line 2) Load Attenuation Loss 1A Standard version - - - - differential mode _____ common mode 2A 3A  EMC Products -Phase Line Filters www.schurter.com/pg06_ Industrial Version FSS 6A 10 A 16 A 4A Rated Current [A] 1 2 3 4 6 10 16 Filter-Type Standard Version Standard Version Standard Version Industrial Version Industrial Version Industrial Version Industrial Version Leakage Current [mA] 0.25 0.25 0.25 1.4 1.4 1.4 1.4 L [mH] 2 x 15 2 x 10 2 x 12 2 x 10 2x6 2x5 2x4 L [mH] 1 0.4 1 0.8 0.5 0.2 0.2 L [mH] 0.4 0.2 0.2 Cx [μF] Cx [μF] 0.1 0.1 0.1 0.1 0.1 0.1 0.47 0.47 0.47 0.68 0.68 0.68 1 2.2 Cy [nF] 1.5 1.5 1.5 10 10 10 10 Cy [nF] 1 1 1 4.7 4.7 4.7 4.7 R [MΩ] 1 1 1 1 1 1 1 Weight [g] 121 121 275 275 284 529 2000 Housing 10 10 48 48 48 19 27 Order Number 5500.2051 5500.2052 5500.2053 5500.2054 5500.2055 5500.2056 5500.2057 Packaging unit 10 Pcs The specifications, descriptions and illustrations indicated in this document are based on EMC Products current information. All content is subject to modifications and amendments.