GRF2
Power Entry Modules with Line Filter
https://www.schurter.com /PG06
IEC Appliance Inlet C14 with Shielding, "Lock and Shield" Mounting
GRF2: only with shield, without line filter
C14
See below:
Approvals and Compliances
70° C
Description
- Panel mount :
Snap-in version rear-side
- 2 Functions :
Appliance Inlet Protection class I , with EMC-shield
Characteristics
- Time saving "Lock and Shield" snap-in design for rear-panel mounting
- All single elements are already wired
- Innovative EMC-shielding with flexible steel segments for an excellent
contact to the panel
- For applications according IEC/UL 62368-1 we recommend variants
with bleed resistor
Other versions on request
- With solder terminals
References
Alternative: version with line filter
Weblinks
pdf data sheet, html datasheet, General Product Information, Approvals,
Distributor-Stock-Check, Accessories, Detailed request for product
Technical Data
Ratings IEC
Ratings UL/CSA
Dielectric Strength
Allowable Operation Temperature
Climatic Category
IP-Protection
Protection Class
Terminal
Panel Thickness S
Material
10 A @ Ta 40 °C / 250 VAC; 50 Hz
15 A @ Ta 40 °C / 250 VAC; 60 Hz
> 1.7 kVDC between L-N
> 2.7 kVDC between L/N-PE
Test voltage (2 sec)
-25 °C to 85 °C
Appliance inlet/-outlet
MTBF
C14 acc. to IEC 60320-1,
UL 60320-1, CSA C22.2 no. 60320-1
(for cold conditions) pin-temperature 70
°C, 10 A, Protection Class I
> 3'300'000 h acc. to MIL-HB-217 F
25/085/21 acc. to IEC 60068-1
front side IP40 acc. to IEC 60529
Suitable for appliances with protection
class I acc. to IEC 61140
Quick connect terminals 4.8 x 0.8 mm
Plug Connector
Solder terminal on request
Snap-in: 1.2/1.5/2 mm
Thermoplastic, black, UL 94V-0
Approvals and Compliances
Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about
Approvals
SCHURTER products are designed for use in industrial environments. They have approvals from independent testing bodies according to national
and international standards. Products with specific characteristics and requirements such as required in the automotive sector according to IATF
16949, medical technology according to ISO 13485 or in the aerospace industry can be offered exclusively with customer-specific, individual agreements by SCHURTER.
EMC Products
1
GRF2
Power Entry Modules with Line Filter
https://www.schurter.com /PG06
Approvals
The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products.
Approval Reference Type: GRF2
Approval Logo
Certificates
Certification Body
Description
VDE Approvals
VDE
VDE Certificate Number: 40025743
UL Approvals
UL
UR File Number: E96454
CCC Approvals
CCC
CCC Certificate Number: 2019180204010440
Design
Standard
Description
Designed according to
IEC 60320-1
Appliance couplers for household and similar general purposes
Designed according to
IEC 60939
Passive filters for suppressing electromagnetic interference
Designed according to
IEC 61058-1
Switches for appliances. Part 1. General requirements
Designed according to
UL 60320-1
Standard for Attachment Plugs and Receptacles
Designed according to
UL 1283
Electromagnetic interference filters
Designed according to
CSA C22.2 no. 60320-1
General Use Receptacles, Attachment Plugs, and Similar Wiring Devices
Designed according to
CSA C22.2 no. 8
Electromagnetic interference (EMI) filters
Design
Standard
Description
Suitable for applications acc.
IEC/UL 62368-1
Audio/video, information and communication technology equipment - Part
1: Safety requirements
Details
Initiator
Description
CE declaration of conformity
SCHURTER AG
The CE marking declares that the product complies with the applicable
requirements laid down in the harmonisation of Community legislation on
its affixing in accordance with EU Regulation 765/2008.
UKCA declaration of conformity
SCHURTER AG
The UKCA marking declares that the product complies with the applicable
requirements laid down in the British Amendment of Regulation (EC)
765/2008.
RoHS
SCHURTER AG
Directive RoHS 2011/65/EU, Amendment (EU) 2015/863
China RoHS
SCHURTER AG
The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March
2007. It is similar to the EU directive RoHS.
REACH
SCHURTER AG
On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration,
Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as
"REACH") entered into force.
Product standards
Product standards that are referenced
Organization
Application standards
Application standards where the product can be used
Organization
Compliances
The product complies with following Guide Lines
Identification
2
EMC Products
GRF2
Power Entry Modules with Line Filter
https://www.schurter.com /PG06
Dimension [mm]
GRF2
M4
8.8
22.6
1)
22.9
20.8 ±0.1
22.9
1)
47.5
M4
4.8 +0.2 max.29
max. R1.5
30.5 ±0.1
This area must be conductive for optimal
shielding. Do not apply paint or coatings.
S ±0.1
1) Terminal for earth screw M4
1) Terminal for earth screw M4
Assembly Instructions
Step 1
Step 2
Place the socket in top edge of the panel cut-out.
Push the socket upwards.
Step 3
Step 4
Push the socket forward into the panel cut-out.
Release the socket. The component is self adjusting.
All Variants
Rated Current
IEC [A]
Rated Current
UL [A]
10
15
10
Filter-Type
Panel Thickness
s [mm]
Additional ground terminal
Weight [g]
Order Number
-
1.2
-
13.9 g
GRF2.0212.11
15
-
1.5
-
13.9 g
GRF2.0215.11
10
15
-
2
-
13.9 g
GRF2.0220.11
10
15
-
1.2
Quick connect terminal 4.8 x 0.8 mm
14 g
GRF2.0312.11
10
15
-
1.5
Quick connect terminal 4.8 x 0.8 mm
25 g
GRF2.0315.11
10
15
-
2
Quick connect terminal 4.8 x 0.8 mm
14 g
GRF2.0320.11
Availability for all products can be searched real-time:https://www.schurter.com/en/Stock-Check/Stock-Check-SCHURTER
Packaging unit
100 Pcs
EMC Products
3
GRF2
Power Entry Modules with Line Filter
https://www.schurter.com /PG06
Mating Outlets/Connectors
Category / Description
Appliance Outlet Overview complete
4787, Mounting: Screw-on mounting, Appliance Outlet: IEC Solder terminals, 10 A, Suitable for appliances with protection class I
4787
4788, Mounting: Snap-in version, Appliance Outlet: IEC Solder / Quick Connect, 10 A, Suitable for appliances with
protection class I
4788
IEC Appliance Outlet F or H, Screw-on Mounting, Front Side, Solder, PCB or Quick-connect Terminal
5091
Connector Overview complete
4782 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13
4782
4785 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13
4785
4300-06 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13
4300-06
4781 Mounting: Power Cord, Cable, Connector: IEC C15
4781
4784 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C15
4784
15.08.2023
4
EMC Products
The specifications, descriptions and illustrations indicated in this document are based on current
information. All content is subject to modifications and amendments. Information furnished is believed
to be accurate and reliable. However, users should independently evaluate the suitability and test each
product selected for their own applications.
