GRF2

Power Entry Modules with Line Filter www.schurter.com/pg06 IEC Appliance Inlet C14 with Shielding, "Lock and Shield" Mounting GRF2 GRF2: only with shield, without line filter C14 70° C Description - Panel Mount: Snap-in version from rear-side - 2 Functions: Appliance Inlet Protection class I, with EMC-shield - Alternative: version with line filter Characteristics - Time saving "Lock and Shield" snap-in design for rear-panel mounting - All single elements are already wired - Innovative EMC-shielding with flexible steel segments for an excellent contact to the panel - Qualified for use in equipment according IEC/EN 60950 Approvals Other versions on request - With solder terminals - VDE License Number: 40025743 - UL License Number: E96454 - CSA License Number: 38456 References Weblinks General Product Information Approvals, RoHS, CHINA-RoHS, Mating Connectors, e-Store, Distributor-Stock-Check, Accessories Technical Data Ratings IEC Ratings UL/CSA Dielectric Strength 10 A @ Ta 40 °C / 250 VAC; 50 Hz 15 A @ Ta 40 °C / 125 VAC; 60 Hz > 1.7 kVDC between L-N > 2.7 kVDC between L/N-PE Test voltage (2 sec) -25 °C to 85 °C 25/085/21 acc. to IEC 60068-1 from front side IP 40 acc. to IEC 60529 Suitable for appliances with protection class 1 acc. to IEC 61140 Quick connect terminals 4.8 x 0.8 mm Plug Connector Solder terminal on request Snap-in: 1.2/1.5/2 mm Thermoplastic, black, UL 94V-0 Appliance-Inlet/-Outlet C14 acc. to IEC/EN 60320-1, UL 498, CSA C22.2 no. 42 (for cold conditions) pin-temperature 70 °C, 10 A, Protection Class 1 > 3'300'000 h acc. to MIL-HB-217 F MTBF Allowable Operation Temp. Climatic Category Degree of Protection Protection Class Terminal Panel Thickness s Material: Housing Dimensions GRF2 4.8 +0.2 max.29 M4 M4 22.9 1) 20.8 ±0.1 47.5 22.6 8.8 max. R1.5 30.5 ±0.1 S ±0.1 1) Terminal for earth screw M4 1) Terminal for earth screw M4 This area must be conductive for optimal shielding. Do not apply paint or coatings. EMC Products 22.9 1)  GRF2 www.schurter.com/pg06 Dimensions Step 1 Step 2 Step 3 Power Entry Modules with Line Filter Place the socket in top edge of the panel cut-out. Push the socket upwards. Push the socket forward into the panel cut-out. Step 4 Release the socket. The component is self adjusting. Variants Rated Current IEC [A] 10 10 10 10 10 10 Rated Current UL [A] 15 15 15 15 15 15 Filter-Type without without without without without without Panel Thickness s [mm] 1.2 1.5 2 1.2 1.5 2 Additional ground terminal quick connect terminal 4.8 x 0.8 quick connect terminal 4.8 x 0.8 quick connect terminal 4.8 x 0.8 Order Number GRF2.0212.11 GRF2.0215.11 GRF2.0220.11 GRF2.0312.11 GRF2.0315.11 GRF2.0320.11 Packaging unit 100 Pcs Mating Outlets/Connectors Category / Description Appliance Outlet Overview complete IEC Appliance Outlet F, Screw-on Mounting, Front Side, Solder or Quick-connect Terminal IEC Appliance Outlet F, Snap-in Mounting, Front Side, Solder or Quick-connect Terminal IEC Appliance Outlet F or H, Screw-on Mounting, Front Side, Solder, PCB or Quick-connect Terminal IEC Appliance Outlet F or H, Screw-on Mounting, Front Side, Solder or Quick-connect Terminal Appliance Outlet further types to GRF2 Connector Overview complete IEC Connector C15, Rewireable, Straight IEC Connector C15A, Rewireable, Straight IEC Connector C15A, Rewireable, Straight IEC Connector C15A, Rewireable, Angled IEC Connector C13, Rewireable, Angled Connector further types to GRF2 Power Cord Overview complete Power Cord with IEC Connector C13, Angled Power Cord with IEC Connector C13, Angled Power Cord with IEC Connector C13, Angled Power Cord with IEC Connector C13, Angled Power Cord with IEC Connector C13 Power Cord further types to GRF2 0311 3011 3012 3013 3020 ... 0101 0102 0102-G 0112 4012 ... 4787 4788 5091 5092 2 EMC Products Power Entry Modules with Line Filter www.schurter.com/pg06 GRF2 The specifications, descriptions and illustrations indicated in this document are based on EMC Products current information. All content is subject to modifications and amendments.