GRF4.0416.013

GRF4 Power Entry Modules with Line Filter https://www.schurter.com /PG06 IEC Appliance Inlet C14 with Filter, "Lock and Shield" Mounting GRF4: with shield and line filter C14 See below: Approvals and Compliances 70° C Description - Panel mount : Snap-in version rear-side - 3 Functions : Appliance Inlet Protection class I , with EMC-shield , Line filter in standard and medical version Characteristics - Time saving "Lock and Shield" snap-in design for rear-panel mounting - All single elements are already wired - Innovative EMC-shielding with flexible steel segments for an excellent contact to the panel - Suitable for use in medical equipment according to IEC/UL 60601-1 (1 MOOP, 1 MOPP) For applications according IEC/UL 62368-1 we recommend variants with bleed resistor Other versions on request - Panel thickness 1.2 mm and 2.0 mm References Alternative: version without line filter   GRF2  Alternative: Standard version   Weblinks pdf data sheet, html datasheet, General Product Information, Approvals, Distributor-Stock-Check, Accessories, Detailed request for product Technical Data Ratings IEC Ratings UL/CSA Leakage Current Dielectric Strength Allowable Operation Temperature Climatic Category IP-Protection Protection Class Terminal Panel Thickness S Material: Housing   0.5 - 10 A @ Ta 40 °C / 250 VAC; 50 Hz 0.5 - 15 A @ Ta 40 °C / 250 VAC; 60 Hz standard < 0.5 mA (250 V / 60 Hz) medical < 5 µA (250 V / 60 Hz) > 1.7 kVDC between L-N > 2.7 kVDC between L/N-PE Test voltage (2 sec) -25 °C to 85 °C Appliance inlet/-outlet Line Filter MTBF C14 acc. to IEC 60320-1, UL 60320-1, CSA C22.2 no. 60320-1 (for cold conditions) pin-temperature 70 °C, 10 A, Protection Class I Standard and Medical Version, IEC 60939, UL 1283, CSA C22.2 no. 8 Technical Details > 3'300'000 h acc. to MIL-HB-217 F 25/085/21 acc. to IEC 60068-1 front side IP40 acc. to IEC 60529 Suitable for appliances with protection class I acc. to IEC 61140 Quick connect terminals 4.8 x 0.8 mm Screw Mounting screw torque max 0.5 Nm Snap-in: 1.5 mm (other on request) Thermoplastic, black, UL 94V-0 Approvals and Compliances Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in  Details about Approvals SCHURTER products are designed for use in industrial environments. They have approvals from independent testing bodies according to national and international standards. Products with specific characteristics and requirements such as required in the automotive sector according to IATF 16949, medical technology according to ISO 13485 or in the aerospace industry can be offered exclusively with customer-specific, individual agreements by SCHURTER. EMC Products 1 GRF4 Power Entry Modules with Line Filter https://www.schurter.com /PG06 Approvals The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products. Approval Reference Type: GRF4 Approval Logo Certificates Certification Body Description VDE Approvals VDE VDE Certificate Number: 102348 UL Approvals UL UL File Number: E72928 Design Standard Description Designed according to IEC 60320-1 Appliance couplers for household and similar general purposes Designed according to IEC 60939 Passive filters for suppressing electromagnetic interference Designed according to IEC 61058-1 Switches for appliances. Part 1. General requirements Designed according to UL 60320-1 Standard for Attachment Plugs and Receptacles Designed according to UL 1283 Electromagnetic interference filters Designed according to CSA C22.2 no. 60320-1 General Use Receptacles, Attachment Plugs, and Similar Wiring Devices Designed according to CSA C22.2 no. 8 Electromagnetic interference (EMI) filters Design Standard Description Designed for applications acc. IEC/UL 62368-1 Audio/video, information and communication technology equipment - Part 1: Safety requirements Designed for applications acc. IEC 60601-1 Medical electrical equipment - Part 1: General requirements for basic safety and essential performance Details Initiator Description CE declaration of conformity SCHURTER AG The CE marking declares that the product complies with the applicable requirements laid down in the harmonisation of Community legislation on its affixing in accordance with EU Regulation 765/2008. UKCA declaration of conformity SCHURTER AG The UKCA marking declares that the product complies with the applicable requirements laid down in the British Amendment of Regulation (EC) 765/2008. RoHS SCHURTER AG Directive RoHS 2011/65/EU, Amendment (EU) 2015/863 China RoHS SCHURTER AG The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March 2007. It is similar to the EU directive RoHS. REACH SCHURTER AG On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration, Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as "REACH") entered into force. Medical Equipment SCHURTER AG Suitable for use in medical equipment according to IEC/UL 60601-1 (1 MOOP, 1 MOPP) Product standards Product standards that are referenced Organization Application standards Application standards where the product can be used Organization Compliances The product complies with following Guide Lines Identification 2 EMC Products GRF4 Power Entry Modules with Line Filter https://www.schurter.com /PG06 Dimension [mm] GRF4 30.25 M4 24.3 4.8 +0.2 24.2 ±0.3 max. R1.5 22.6 1) 22.9 20.8 ±0.1 59.3 M4 1) 25.2 28.3 6.13 4.8x0.8 30.5 ±0.1 31.4 1) Terminal for earth screw M4 S ±0.1 This area must be conductive for optimal shielding. Do not apply paint or coatings. Assembly Instructions Step 1 Step 2 Place the socket in top edge of the panel cut-out. Push the socket upwards. Step 3 Step 4 Push the socket forward into the panel cut-out. Release the socket. The component is self adjusting. Technical Data of Filter-Components Rated Current [A] 0.5 Filter-Type Standard version Inductances L [mH] Capacitance CX [nF] Capacitance CY [nF] R [MΩ] 2 x 24 100 2.2 - 1 Standard version 2 x 12 100 2.2 - 3 Standard version 2 x 2.5 100 2.2 - 6 Standard version 2 x 0.78 100 2.2 - 10 Standard version 2 x 0.225 100 2.2 - 15 Standard version 2 x 0.1 100 2.2 - 0.5 Medical Version (M5) 2 x 24 100 - 1 1 Medical Version (M5) 2 x 12 100 - 1 3 Medical Version (M5) 2 x 2.5 100 - 1 6 Medical Version (M5) 2 x 0.78 100 - 1 10 Medical Version (M5) 2 x 0.225 100 - 1 15 Medical Version (M5) 2 x 0.1 100 - 1 EMC Products 3 GRF4 Power Entry Modules with Line Filter https://www.schurter.com /PG06 Diagrams Standard version Medical Version (M5) L L L’ L’ L1 1) PE Cx L1 Cy R L2 N Cy 1) Line 2) Load PE’ 2) 1) PE Cx PE’ 2) R L2 N N’ N’ 1) Line 2) Load Attenuation Loss - - - - 50Ω differential mode _____ 50Ω common mode Standard version 0.5 A 1A 10 A 15A 3A 6A 3A 6A Medical version (M5) 0.5 A 1A 10 A 15A 4 EMC Products GRF4 Power Entry Modules with Line Filter https://www.schurter.com /PG06 All Variants Rated Current IEC [A] Rated Current UL [A] 0.5 0.5 Filter-Type Panel Thickness s [mm] Standard version 1 Packaging unit Order Number 20 GRF4.0411.011.C 1 1 Standard version 1 20 GRF4.0412.011.C 6 6 Standard version 1 20 GRF4.0416.011.C 10 10 Standard version 1 20 GRF4.0417.011.C 0.5 0.5 Standard version 1.5 20 GRF4.0411.013.C 1 1 Standard version 1.5 20 GRF4.0412.013.C 3 3 Standard version 1.5 20 GRF4.0413.013.C 6 6 Standard version 1.5 20 GRF4.0416.013.C 10 10 Standard version 1.5 20 GRF4.0417.013.C 15 15 Standard version 1.5 20 GRF4.0419.013.C 3 3 Standard version 2 20 GRF4.0413.014.C 0.5 0.5 Medical Version (M5) 1.5 20 GRF4.0021.013.C 1 1 Medical Version (M5) 1.5 20 GRF4.0022.013.C 3 3 Medical Version (M5) 1.5 20 GRF4.0023.013.C 6 6 Medical Version (M5) 1.5 20 GRF4.0026.013.C 10 10 Medical Version (M5) 1.5 20 GRF4.0027.013.C 15 15 Medical Version (M5) 1.5 20 GRF4.0029.013.C █ █ Most Popular. Availability for all products can be searched real-time:https://www.schurter.com/en/Stock-Check/Stock-Check-SCHURTER Packaging unit  20 Pcs  Mating Outlets/Connectors Category / Description Appliance Outlet Overview complete 4787, Mounting: Screw-on mounting, Appliance Outlet: IEC Solder terminals, 10 A, Suitable for appliances with protection class I 4787 4788, Mounting: Snap-in version, Appliance Outlet: IEC Solder / Quick Connect, 10 A, Suitable for appliances with protection class I 4788 IEC Appliance Outlet F or H, Screw-on Mounting, Front Side, Solder, PCB or Quick-connect Terminal 5091   Connector Overview complete 4782 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4782 4785 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4785 4300-06 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4300-06 4781 Mounting: Power Cord, Cable, Connector: IEC C15 4781 4784 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C15 4784 ... 04.01.2022   The specifications, descriptions and illustrations indicated in this document are based on current information. All content is subject to modifications and amendments. Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability and test each product selected for their own applications. EMC Products 5