GRF4.0417.013.C

Power Entry Modules with Line Filter www.schurter.com/pg06 IEC Appliance Inlet C14 with Filter, "Lock and Shield" Mounting GRF4 Standard- or Medical-Filter GRF4: with shield and line filter C14 70° C - Panel Mount: Snap-in version from rear-side - 3 Functions: Appliance Inlet Protection class I, with EMC-shield, Line filter in standard and medical version - Alternative: version without line filter GRF2 Description Characteristics - Time saving "Lock and Shield" snap-in design for rear-panel mounting - All single elements are already wired - Innovative EMC-shielding with flexible steel segments for an excellent contact to the panel - Qualified for use in equipment according IEC/EN 60950 Other versions on request References Weblinks General Product Information Approvals - Panel thickness 1.2 mm and 2.0 mm - VDE License Number: 102348 - UL License Number: E72928 - CSA License Number: 701867 Approvals, RoHS, CHINA-RoHS, Mating Connectors, e-Store, Distributor-Stock-Check, Accessories Technical Data Ratings IEC Ratings UL/CSA Leakage Current Dielectric Strength 0.5 - 10 A @ Ta 40 °C / 250 VAC; 50 Hz 0.5 - 15 A @ Ta 40 °C / 125 VAC; 60 Hz standard < 0.5 mA (250 V / 60 Hz) medical < 5 µA (250 V / 60 Hz) > 1.7 kVDC between L-N > 2.7 kVDC between L/N-PE Test voltage (2 sec) -25 °C to 85 °C 25/085/21 acc. to IEC 60068-1 from front side IP 40 acc. to IEC 60529 Suitable for appliances with protection class 1 acc. to IEC 61140 Quick connect terminals 4.8 x 0.8 mm Snap-in: 1.5 mm (other on request) Thermoplastic, black, UL 94V-0 Appliance-Inlet/-Outlet C14 acc. to IEC/EN 60320-1, UL 498, CSA C22.2 no. 42 (for cold conditions) pin-temperature 70 °C, 10 A, Protection Class 1 Standard and Medical Version, IEC 60939, IEC 60601-1, UL 1283, UL 544, EN 133 200, CSA C22.2 no. 8 Technical details > 3'300'000 h acc. to MIL-HB-217 F Line Filter Allowable Operation Temp. Climatic Category Degree of Protection Protection Class Terminal Panel Thickness s Material: Housing MTBF Dimensions GRF4 4.8 +0.2 24.2 ±0.3 6.13 28.3 4.8x0.8 M4 1) 59.3 25.2 30.25 24.3 M4 20.8 ±0.1 max. R1.5 30.5 ±0.1 22.6 31.4 S ±0.1 1) Terminal for earth screw M4 This area must be conductive for optimal shielding. Do not apply paint or coatings. EMC Products 22.9 1)  GRF4 www.schurter.com/pg06 Technical Data of Filter-Components Rated Current [A] 0.5 1 3 6 10 15 0.5 1 3 6 10 15 Filter-Type Standard Version Standard Version Standard Version Standard Version Standard Version Standard Version Medical Version (M5) Medical Version (M5) Medical Version (M5) Medical Version (M5) Medical Version (M5) Medical Version (M5) Inductances L [mH] 2 x 24 2 x 12 2 x 2.5 2 x 0.78 2 x 0.225 2 x 0.075 2 x 24 2 x 12 2 x 2.5 2 x 0.78 2 x 0.225 2 x 0.075 Capacitance CX [nF] 100 100 100 100 100 100 100 100 100 100 100 100 Capacitance CY [nF] 2.2 2.2 2.2 2.2 2.2 2.2 R [MΩ] 1 1 1 1 1 1 Power Entry Modules with Line Filter Dimensions Step 1 Step 2 Step 3 Place the socket in top edge of the panel cut-out. Push the socket upwards. Push the socket forward into the panel cut-out. Step 4 Release the socket. The component is self adjusting. Diagrams Standard version Medical version 1) Line 2) Load 1) Line 2) Load  EMC Products Power Entry Modules with Line Filter www.schurter.com/pg06 GRF4 - - - - differential mode _____ common mode Attenuation Loss 0.5 A Standard version 1A 3A 6A 10 A 15A Medical version (M5) 0.5 A 1A 3A 6A 10 A 15A Variants Rated Current IEC [A] 0.5 1 6 10 0.5 1 3 6 10 15 3 0.5 1 3 6 10 15 Rated Current UL [A] 0.5 1 6 10 0.5 1 3 6 10 15 3 0.5 1 3 6 10 15 Filter-Type Standard Version Standard Version Standard Version Standard Version Standard Version Standard Version Standard Version Standard Version Standard Version Standard Version Standard Version Medical Version (M5) Medical Version (M5) Medical Version (M5) Medical Version (M5) Medical Version (M5) Medical Version (M5) Panel Thickness s [mm] 1 1 1 1 1.5 1.5 1.5 1.5 1.5 1.5 2 1.5 1.5 1.5 1.5 1.5 1.5 Order Number GRF4.0411.011.C GRF4.0412.011.C GRF4.0416.011.C GRF4.0417.011.C GRF4.0411.013.C GRF4.0412.013.C GRF4.0413.013.C GRF4.0416.013.C GRF4.0417.013.C GRF4.0419.013.C GRF4.0413.014.C GRF4.0021.013.C GRF4.0022.013.C GRF4.0023.013.C GRF4.0026.013.C GRF4.0027.013.C GRF4.0029.013.C Articles with packing unit 200 (without ending ".C") are no longer available EMC Products  GRF4 www.schurter.com/pg06 Packaging unit 20 Pcs Power Entry Modules with Line Filter Mating Outlets/Connectors Category / Description Appliance Outlet Overview complete IEC Appliance Outlet F, Screw-on Mounting, Front Side, Solder or Quick-connect Terminal IEC Appliance Outlet F, Snap-in Mounting, Front Side, Solder or Quick-connect Terminal IEC Appliance Outlet F or H, Screw-on Mounting, Front Side, Solder, PCB or Quick-connect Terminal IEC Appliance Outlet F or H, Screw-on Mounting, Front Side, Solder or Quick-connect Terminal Appliance Outlet further types to GRF4 Connector Overview complete IEC Connector C15, Rewireable, Straight IEC Connector C15A, Rewireable, Straight IEC Connector C15A, Rewireable, Straight IEC Connector C15A, Rewireable, Angled IEC Connector C13, Rewireable, Angled Connector further types to GRF4 Power Cord Overview complete Power Cord with IEC Connector C13, Angled Power Cord with IEC Connector C13, Angled Power Cord with IEC Connector C13, Angled Power Cord with IEC Connector C13, Angled Power Cord with IEC Connector C13 Power Cord further types to GRF4 0311 3011 3012 3013 3020 ... 0101 0102 0102-G 0112 4012 ... 4787 4788 5091 5092 4 The specifications, descriptions and illustrations indicated in this document are based on EMC Products current information. All content is subject to modifications and amendments.