GRM2

Power Entry Modules with Line Filter www.schurter.com/pg06 IEC Appliance Inlet C14 with Line Switch, Fuseholder 1- or 2-pole, Voltage Selector (series-parallel), "Lock and Shield" Mounting, GRM2 GRM2: only with shield, without line filter C14 70° C Description - Panel Mount: Snap-in version from rear-side - 5 Functions: Appliance Inlet Protection class I, Line Switch 2-pole, with or without Fuseholder for fuse-links 5 x 20 mm, with or without voltage selector, with EMC-shield Characteristics Approvals - VDE License Number: 40024784 - UL License Number: E93617 - Ultra-compact design Time saving "Lock and Shield" snap-in design for rear-panel mounting - All single elements are already wired - Fuseholder on the inside of the equipment prevents accidental use of incorrect fuse-links by the user - Voltage selector for two voltage ranges Innovative EMC-shielding with flexible steel segments for an excellent contact to the panel - Insulation cover on the rear-side - Qualified for use in equipment according IEC/EN 60950 Other versions on request - Panel thickness 1.0 / 2 / 2.5 mm (max.) - Fuseholder 1-pole - Line switch 1-pole - Voltage selector with other marking References Weblinks General Product Information Approvals, RoHS, CHINA-RoHS, Mating Connectors, e-Store, Distributor-Stock-Check, Accessories Technical Data Ratings IEC Ratings UL/CSA Dielectric Strength 10 A @ Ta 40 °C / 250 VAC; 50 Hz 10 A @ Ta 40 °C / 125 VAC; 60 Hz > 1.7 kVDC between L-N > 2.7 kVDC between L/N-PE Test voltage (2 sec) -25 °C to 85 °C 25/085/21 acc. to IEC 60068-1 from front side IP 40 acc. to IEC 60529 Suitable for appliances with protection class 1 acc. to IEC 61140 Quick connect terminals 4.8 x 0.8 mm Solder terminal on request Solder terminals for voltage selector Snap-in: 1.5 mm (other on request) Thermoplastic, black, UL 94V-0 Appliance-Inlet/-Outlet C14 acc. to IEC/EN 60320-1, UL 498, CSA C22.2 no. 42 (for cold conditions) pin-temperature 70 °C, 10 A, Protection Class 1 1 or 2 pole, Shocksafe category PC2 acc. to IEC 60127-6, for fuse-links 5 x 20 mm 5 x 20: 2 W (1 pole)/ 1.6 W (2-pole) per pole Admissible power acceptance at higher ambient temperature see derating curves Rocker switch 2-pole, non-illuminated, acc. to IEC 61058-1 Technical details optional, jumper, 2 pos. > 1'400'000 h acc. to MIL-HB-217 F Fuseholder Allowable Operation Temp. Climatic Category Degree of Protection Protection Class Terminal Rated Power Acceptance @ Ta 23 °C Power Acceptance @ Ta > 23°C Line Switch Panel Thickness s Material: Housing Voltage Selectors MTBF EMC Products  GRM2 www.schurter.com/pg06 Dimensions GRM2 48.3 mm Power Entry Modules with Line Filter 49.5 33.9 26.0 13.4 L +0.1 0 4.5 42.3 38.4 45.4 3.9 12.5 8.4 13.45 ±0.1 PE N 1.7 R5 5 4.5 24 2.2 31.7 S 0.05 min.8 *) E 8.6 PE 6.5 2 6.9 ±0.1 34.2 ±0.05 Dimensions Step 1 Step 2 Step 3 Place the socket in top edge of the panel cut-out. Push the socket upwards. Push the socket forward into the panel cut-out. Step 4 Release the socket. The component is self adjusting. Diagrams Voltage selector GRM2 1) Line 2) Load 2 EMC Products 40.9 R1 Power Entry Modules with Line Filter www.schurter.com/pg06 GRM2 Derating Curves 1-pole 2.0 2-pole Admissible power acceptance in Watt per pole 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0.0 0 20 40 60 80 100 I = 1.0 In I = 0.7 In I = < < In Admissible power acceptance in Watt 1.5 I = 1.0 In 1.0 I = 0.7 In I = < < In 0.5 0.0 0 20 40 60 80 100 Ambient air temperature Ta °C Ambient air temperature Ta °C Variants Basic version: - Marking of the voltage selector 115/230 - with housing and cover on the rear-side Rated Current [A] 10 10 10 10 Filter-Type without without without without Fuseholder 2-pole 2-pole Line Switch 2-pole 2-pole 2-pole 2-pole l l Voltage Selectors Order Number GRM2.1160.013 GRM2.1161.023 GRM2.1180.013 GRM2.1181.023 Packaging unit 20 Pcs Mating Outlets/Connectors Category / Description Appliance Outlet Overview complete IEC Appliance Outlet F, Screw-on Mounting, Front Side, Solder or Quick-connect Terminal IEC Appliance Outlet F, Snap-in Mounting, Front Side, Solder or Quick-connect Terminal IEC Appliance Outlet F or H, Screw-on Mounting, Front Side, Solder, PCB or Quick-connect Terminal IEC Appliance Outlet F or H, Screw-on Mounting, Front Side, Solder or Quick-connect Terminal Appliance Outlet further types to GRM2 Connector Overview complete IEC Connector C15, Rewireable, Straight IEC Connector C15A, Rewireable, Straight IEC Connector C15A, Rewireable, Straight IEC Connector C15A, Rewireable, Angled IEC Connector C13, Rewireable, Angled Connector further types to GRM2 Power Cord Overview complete Power Cord with IEC Connector C13, Angled Power Cord with IEC Connector C13, Angled Power Cord with IEC Connector C13, Angled Power Cord with IEC Connector C13, Angled Power Cord with IEC Connector C13 Power Cord further types to GRM2 0311 3011 3012 3013 3020 ... 0101 0102 0102-G 0112 4012 ... 4787 4788 5091 5092 The specifications, descriptions and illustrations indicated in this document are based on EMC Products current information. All content is subject to modifications and amendments.