GSF1.0102.31

GSF1 Power entry modules without line filter https://www.schurter.com /PG05 IEC Appliance Inlet C14 with Fuseholder 1- or 2-pole Screw-on mounting with fuseholder 1- or 2-pole Sandwich/rear-side Snap-in version with fuseholder 1- or 2-pole Sandwich/rear-side Metal snaps Version, Detail view IEC connector C14 with fuse holder 1- or 2-pole Sandwich/rear-side C14 See below: Approvals and Compliances 70° C Description - Panel mount : Sandwich/rear-side - 2 Functions : Appliance Inlet Protection class I , with or without Fuseholder for fuselinks 5 x 20 mm on the rear-side 1‑ or 2‑pole - Meets the requirements of IEC 60335-1 for appliances in unattended use. This includes the enhanced requirements of glow wire tests acc. to IEC 60695-2-11 or -12 &-13. - For PCB mounting - Pick and place version Characteristics - PCB mount with snap-in or screw-on feet Suitable for automatic PCB assembling - All single elements are already wired - Fuseholder on the inside of the equipment prevents accidental use of incorrect fuse-links by the user - Blister tray as optional packaging variant - Suitable for use in equipment according to IEC/UL 62368-1 Other versions on request - Ground terminal with quick-connect terminal 6,3 x 0,8 mm - Ground terminal with solder terminal - For protection class II Weblinks pdf data sheet, html datasheet, General Product Information, Approvals, Distributor-Stock-Check, Accessories, Detailed request for product Newly available variants corresponding to V-Lock mating cordset. The connector is equipped with a notch intended for use with the latching cordset. The cord latching system prevents against accidental removal of the cordset. Technical Data Ratings IEC Ratings UL/CSA Dielectric Strength Allowable Operation Temperature IP-Protection Protection against electric shock Terminal Panel Thickness S Material: Housing   10 A / 250 VAC; 50 Hz 10 A / 250 VAC; 60 Hz without fuseholder 16A (UL)  > 3 kVAC between L-N > 4 kVAC between L/N-PE (1 min/50 Hz) -25 °C to 70 °C front side IP40 acc. to IEC 60529 Suitable for appliances with protection class I acc. to IEC 61140 For PCB mounting Screw: max 6 mm Mounting screw torque max 0.3 Nm Snap-in: 1.5/2/2.5/3 mm Thermoplastic, black, UL 94V-0 Appliance inlet/-outlet Fuseholder Rated Power Acceptance @ Ta 23 °C Power Acceptance @ Ta > 23°C C14 acc. to IEC 60320-1, UL 498, CSA C22.2 no. 42 (for cold conditions) pin-temperature 70 °C, 10 A, Protection Class I 1-/2-pole, Shocksafe category PC2 acc. to IEC 60127-6, for fuse-links 5 x 20 mm 5 x 20: 3.15 W (1 pole)/ 2.5 W (2-pole) per pole Admissible power acceptance at higher ambient temperature see derating curves Approvals and Compliances Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in  Details about Approvals SCHURTER products are designed for use in industrial environments. They have approvals from independent testing bodies according to national and international standards. Products with specific characteristics and requirements such as required in the automotive sector according to IATF 16949, medical technology according to ISO 13485 or in the aerospace industry can be offered exclusively with customer-specific, individual agreements by SCHURTER. Connectors 1 GSF1 Power entry modules without line filter https://www.schurter.com /PG05 Approvals The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products. Approval Reference Type: GSF1 Approval Logo Certificates Certification Body Description VDE Approvals VDE Certificate Number: 40024857 UL Approvals UL UR File Number: E93617, E96454 CCC Approvals CCC CCC Certificate Number: 2020180204013041 Design Standard Description Designed according to IEC 60320-1 Appliance couplers for household and similar general purposes Designed according to IEC 60127-6 Miniature fuses. Part 6. Fuse-holders for miniature fuse-links Designed according to IEC 61058-1 Switches for appliances. Part 1. General requirements Designed according to UL 498 Standard for Attachment Plugs and Receptacles Designed according to CSA C22.2 no. 42 General Use Receptacles, Attachment Plugs, and Similar Wiring Devices Design Standard Description Suitable for applications acc. IEC/UL 62368-1 Audio/video, information and communication technology equipment - Part 1: Safety requirements Suitable for applications acc. IEC 60335-1 Safety of electrical appliances for household and similar purposes. Meets the requirements for appliances in unattended use. This includes the enhanced requirements of glow wire tests acc. to IEC 60695-2-11 or -12 & -13. Details Initiator Description CE declaration of conformity SCHURTER AG The CE marking declares that the product complies with the applicable requirements laid down in the harmonisation of Community legislation on its affixing in accordance with EU Regulation 765/2008. UKCA declaration of conformity SCHURTER AG The UKCA marking declares that the product complies with the applicable requirements laid down in the British Amendment of Regulation (EC) 765/2008. RoHS SCHURTER AG Directive RoHS 2011/65/EU, Amendment (EU) 2015/863 China RoHS SCHURTER AG The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March 2007. It is similar to the EU directive RoHS. REACH SCHURTER AG On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration, Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as "REACH") entered into force. SCHURTER AG V-Lock system are based on a matching plug-dose combination. The connector is equipped with a notch intended for use with the latching cordset. The cord latching system prevents against accidental removal of the cordset. SCHURTER AG Meets the requirements of IEC 60335-1 for appliances in unattended use. This includes the enhanced requirements of glow wire tests acc. to IEC 60695-2-11 or -12 &-13. Product standards Product standards that are referenced Organization Application standards Application standards where the product can be used Organization Compliances The product complies with following Guide Lines Identification White Paper Glow wire test 2 Connectors GSF1 Power entry modules without line filter https://www.schurter.com /PG05 Dimensions [mm] with insulation cover on rear side for version without fuseholder max. R4.5 19.7 ±0.1 22.3 ±0.1 27 max. R2 26.8 27.7 ±0.1 25.5 30.3 ±0.1 for mounting from rear-side 27.5 for sandwich mounting A = 6 mm for standard versions A = 5 mm for pick and place versions   19.3 6 24.45 12 21.9 19.35 A S 1.5 11.5 29.9 15.9 34 A = 6 mm for standard versions A = 5 mm for pick and place versions S = 0 mm for mounting from rear-side Drilling diagrams without fuseholder with 2-pole fuseholder 18.1 with 1-pole fuseholder 25.4 1.4 Pick and Place versions without / with 1-pole or 2-pole fuseholder 9.05 12.7 1.4 25.4 ±0.10 1.4 D1 D1 1.6 27 D1 1.6 27 D1 for snap-in mounting = 6 ± 0.05 D1 for self-tapping screw = 3.6 ± 0.1 D1 for snap-in mounting = 6 ± 0.05 D1 for self-tapping screw = 3.6 ± 0.1 1.6 6.5 ±0.05 5.8 27 2.3 ±0.05 D1 for snap-in mounting = 6 ± 0.05 D1 for self-tapping screw = 3.6 ± 0.1 1.6 3.5 1* 2.5 10.9 ±0.05 5.5 9.9 5.5 9.9 9.9 1.4 1.6 1.6 2.3 ±0.05 26.7 ±0.10 1* only for protection class II Derating Curves 1-pole 2.5 2.0 I = 1.0 In 1.5 I = 0.7 In I =