GSF1.0222.31

GSF1 POWER ENTRY MODULES WITHOUT LINE FILTER IEC Appliance Connector C14 with Fuseholder 1- or 2-pole Pick & Place Version C14 70° C Description Characteristics - Panel Mount: Sandwich/rear-side - 2 Functions: Inlet Protection class I, with or without Fuseholder for fuse-links 5 x 20 mm on the rear-side 1- or 2-pole - For PCB mounting - Pick and place version - PCB mount with snap-in or screw-on feet Suitable for automatic PCB assembling - All single elements are already wired - Fuseholder on the inside of the equipment prevents accidental use of incorrect fuse-links by the user - With or without rear-side insulation cover Blister tray meets ESD requirements - Qualified for use in equipment according IEC/EN 60950 Other versions on request - Ground terminal with quick-connect terminal 6,3 x 0,8 mm - For protection class II Weblinks Approvals: http://www.schurter.com/approvals RoHS: http://www.schurter.com/rohs Technical Data Ratings IEC Ratings UL/CSA Dielectric Strength Terminal Panel Thickness s Material: Housing 10 A / 250 VAC; 50 Hz 10 A / 250 VAC; 60 Hz > 3 kVAC between L-N > 4 kVAC between L/N-PE (1 min/50 Hz) -25 °C to 70 °C from front side IP 40 acc. to IEC 60529 Suitable for appliances with protection class I acc. to IEC 61140 For PCB mounting Snap-in: 1.5/2/2.5/3 mm Thermoplastic, black, UL 94V-0 Dimensions Length Allowable Operation Temp. Degree of Protection Protection Class Appliance-Inlet /-Outlet C14 acc. to IEC/EN 60320-1, UL 498, CSA C22.2 no. 42 (for cold condition) pin-temperature 70 °C, 10 A, Protection class I Fuseholder optional, 1 or 2 pole, Shocksafe category PC2 acc. to IEC 60127-6, for fuse-links 5 x 20 mm Rated Power Acceptance @ Ta 5 x 20: 3.15 W (1 pole)/ 2.5 W (2-pole) per 23 °C pole Power Acceptance @ Ta > 23°C Admissible power acceptance at higher ambient temperature see derating curves 34 mm rear-side mounting: without groove with insulation cover 19.3 6 A S 29.9 34 1.5 30.3 ±0.1 11.5 15.9 A = 6 mm for standard versions A = 5 mm for pick and place versions 1 www.schurter.com for mounting from rear-side 22.3 ±0.1 max. R4.5 25.5 19.35 21.9 12 24.45 26.8 GSF1 22.3 ±0.1 POWER ENTRY MODULES WITHOUT LINE FILTER max. R4.5 30.3 ±0.1 A = 6 mm for standard versions A = 5 mm for pick and place versions for sandwich mounting Drilling diagrams without fuseholder with 1-pole fuseholder 18.1 with 2-pole fuseholder Pick and Place versions without / with 1-pole or 2-pole fuseholder 9.05 12.7 1.4 25.4 1.4 25.4 ±0.10 5.5 D1 d1 for snap-in mounting = 6 ± 0.05 d1 for self-tapping screw = 3.6 ± 0.1 1.6 5.8 2.3 ±0.05 27 d1 for snap-in mounting = 6 ± 0.05 d1 for self-tapping screw = 3.6 ± 0.1 6.5 ±0.05 1.6 27 d1 for snap-in mounting = 6 ± 0.05 d1 for self-tapping screw = 3.6 ± 0.1 1.6 3.5 1* D1 1.6 27 2.5 D1 10.9 ±0.05 5.5 1.4 9.9 9.9 9.9 1.4 1.6 1.6 2.3 ±0.05 26.7 ±0.10 1* only for protection class II Derating curves 2.5 Admissible power acceptance in Watt per pole 2-pole 3.15 Admissible power acceptance in Watt 1-pole 2.0 2.5 I = 1.0 In 2.0 1.5 I = 1.0 In 1.5 I = 0.7 In I =