GSP1.9101.1

GSP1 Connectors (Inlets/Outlets) https://www.schurter.com /PG07 IEC Appliance Inlet C14 or C18, Screw-on Mounting, Rear Side, PCB terminals C14 C18 See below: Approvals and Compliances 70° C 70° C Description - Panel mount , Screw-on mounting rear-side - 1 Function : Appliance Inlet , Pin temperature 70 °C , protection class I or II - V-Lock notch standard - For PCB mounting Other versions on request - Article with enhanced glow wire resistance according IEC 60695-2-11 or -12 & -13 - Ground terminal with quick-connect terminal 6,3 x 0,8 mm - With solder terminals Weblinks pdf data sheet, html datasheet, General Product Information, Approvals, Distributor-Stock-Check, Accessories, Detailed request for product Technical Data   Ratings IEC Ratings UL/CSA Dielectric Strength Allowable Operation Temperature IP-Protection Protection against electric shock Terminal Panel Thickness S Material: Housing 10 A / 250 VAC; 50 Hz 15 A / 250 VAC; 60 Hz > 3 kVAC between L-N > 3 kVAC between L/N-PE (1 min/50 Hz) -25 °C to 70 °C Appliance inlet/-outlet C14 / C18 acc. to IEC 60320-1, UL 60320-1, CSA C22.2 no. 60320-1 (for cold conditions) pin-temperature 70 °C, 10 A, Protection Class I or II front side IP40 acc. to IEC 60529 Suitable for appliances with protection class I or II acc. to IEC 61140 For PCB mounting : Ground terminal: Quick connect terminals 4.8 x 0.8 mm angled or straight Solder terminal on request Screw: max 3 mm Mounting screw torque max 0.5 Nm Thermoplastic, black, UL 94V-0 Approvals and Compliances Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in  Details about Approvals SCHURTER products are designed for use in industrial environments. They have approvals from independent testing bodies according to national and international standards. Products with specific characteristics and requirements such as required in the automotive sector according to IATF 16949, medical technology according to ISO 13485 or in the aerospace industry can be offered exclusively with customer-specific, individual agreements by SCHURTER. Approvals The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products. Approval Reference Type: GSP1 Approval Logo Certificates Certification Body Description VDE Approvals VDE Certificate Number: 40012767 UL Approvals UL UL File Number: E96454 CCC Approvals CCC CCC Certificate Number: 2020180204014251, 2020180204014252 Connectors 1 GSP1 Connectors (Inlets/Outlets) https://www.schurter.com /PG07 Product standards Product standards that are referenced Organization Design Standard Description Designed according to IEC 60320-1 Appliance couplers for household and similar general purposes Designed according to UL 60320-1 Standard for Attachment Plugs and Receptacles Designed according to CSA C22.2 no. 60320-1 General Use Receptacles, Attachment Plugs, and Similar Wiring Devices Design Standard Description Designed for applications acc. IEC/UL 62368-1 Audio/video, information and communication technology equipment - Part 1: Safety requirements Details Initiator Description CE declaration of conformity SCHURTER AG The CE marking declares that the product complies with the applicable requirements laid down in the harmonisation of Community legislation on its affixing in accordance with EU Regulation 765/2008. UKCA declaration of conformity SCHURTER AG The UKCA marking declares that the product complies with the applicable requirements laid down in the British Amendment of Regulation (EC) 765/2008. RoHS SCHURTER AG Directive RoHS 2011/65/EU, Amendment (EU) 2015/863 China RoHS SCHURTER AG The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March 2007. It is similar to the EU directive RoHS. REACH SCHURTER AG On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration, Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as "REACH") entered into force. SCHURTER AG V-Lock system are based on a matching plug-dose combination. The connector is equipped with a notch intended for use with the latching cordset. The cord latching system prevents against accidental removal of the cordset. Application standards Application standards where the product can be used Organization Compliances The product complies with following Guide Lines Identification Dimensions [mm] PIN: Spacing 7 / 7.3mm or 9.05 / 7.3mm anglled to pin axis 24.3 25.5 27.8 L1 40 15.85 Ă 3.4 3.2 Ă 3.4 With insulation cover 40 7.3 8.7 3.5 Drilling diagram for printed circuit board L1: Solder terminal 12.25 mm QC 4.8 terminal 14.25 mm QC 6.3 terminal 15.25 mm 7 ā0.05 7 ā0.05 7.3 ā0.10 49.6 straight to pin axis Panel cut-out 40 30.3 Ă 3.6 Ă 1.6 L2 ā0.15 40 ā0.15 ā0.10 9.05 ā0.05 7.3 22.5 Ă 3.6 2 .9 R5 Ă 3.6 Connectors ā0.05 ā0.10 ā0.10 9.05 L2: Solder terminal 28 mm QC 4.8 terminal 31 mm QC 6.3 terminal 32 mm Ă 1.6 40 ā0.15 GSP1 Connectors (Inlets/Outlets) https://www.schurter.com /PG07 PIN: Spacing 7 / 9.7mm or 9.05 / 9.7mm anglled to pin axis 24.3 25.5 27.8 L1 40 15.85 Ă 3.4 3.75 Ă 3.4 With insulation cover 40 9.7 8.7 3.5 Drilling diagram for printed circuit board L1: Solder terminal 12.25 mm QC 4.8 terminal 14.25 mm QC 6.3 terminal 15.25 mm 7 ā0.05 7 ā0.05 9.7 ā0.10 49.6 straight to pin axis Panel cut-out 40 30.3 Ă 1.6 Ă 3.6 L2 ā0.15 40 ā0.15 ā0.10 9.05 ā0.05 ā0.05 22.5 9.7 ā0.10 ā0.10 9.05 Ă 3.6 .9 R5 Ă 3.6 L2: Solder terminal 28 mm QC 4.8 terminal 31 mm QC 6.3 terminal 32 mm Ă 1.6 40 ā0.15 All Variants Protection Class PCB terminal spacing Mounting flange with Ground terminal 4.8 x 0.8 mm Cover l Order Number I 7/7.3 PCB side through holes, panel side pre-inserted nuts straight I 7/7.3 holes for screws M3 angled to pin axis GSP1.9413.1 I 7/7.3 holes for screws M3 straight I 7/7.3 holes for screws M3 straight I 7/7.3 holes for self-tapping screws 3mm, 4 screws enclosed straight GSP1.9503.1 GSP1.9101.1 l GSP1.9103.1 █ GSP1.9113.1 █ I 7/7.3 pre-inserted nuts M3, 4 pcs. straight GSP1.9203.1 I 9.05/9.7 PCB side through holes, panel side pre-inserted nuts angled to pin axis GSP1.8401.1 I 9.05/9.7 holes for screws M3 angled to pin axis I 9.05/9.7 holes for screws M3 angled to pin axis I 9.05/9.7 holes for screws M3 straight I 9.05/9.7 holes for self-tapping screws 3mm, 2 screws enclosed angled to pin axis I 9.05/9.7 holes for self-tapping screws 3mm, 2 screws enclosed straight I 9.05/9.7 holes for self-tapping screws 3mm, 4 screws enclosed angled to pin axis l GSP1.8101.1 █ GSP1.8111.1 █ GSP1.8103.1 GSP1.8601.1 l GSP1.8613.1 GSP1.8501.1 I 9.05/9.7 holes for self-tapping screws 3mm, without screws angled to pin axis GSP1.8701.1 I 9.05/9.7 pre-inserted nuts M3, 4 pcs. angled to pin axis GSP1.8201.1 I 9.05/9.7 pre-inserted nuts M3, 4 pcs. angled to pin axis I 9.05/9.7 pre-inserted nuts M3, 4 pcs. straight l GSP1.8211.1 GSP1.8203.1 II 7/7.3 holes for screws M3 - II 7/7.3 holes for screws M3 - II 7/7.3 holes for self-tapping screws 3mm, 4 screws enclosed - GSP1.9500.1 II 7/7.3 pre-inserted nuts M3, 4 pcs. - GSP1.9200.1 GSP1.9100.1 l GSP1.9110.1 II 9.05/9.7 holes for screws M3 - II 9.05/9.7 holes for screws M3 - II 9.05/9.7 holes for self-tapping screws 3mm, 4 screws enclosed - GSP1.8500.1 II 9.05/9.7 pre-inserted nuts M3, 4 pcs. - GSP1.8200.1 GSP1.8100.1 l GSP1.8110.1 █ Most Popular. Connectors █ 3 █ █ GSP1 Protection Class Connectors (Inlets/Outlets) https://www.schurter.com /PG07 PCB terminal spacing Mounting flange with Ground terminal 4.8 x 0.8 mm Cover Availability for all products can be searched real-time:https://www.schurter.com/en/Stock-Check/Stock-Check-SCHURTER Packaging unit   50 Pcs  Mating Outlets/Connectors Category / Description Connector Overview complete 4782 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4782 4785 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4785 4300-06 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4300-06 4781 Mounting: Power Cord, Cable, Connector: IEC C15 4781 4784 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C15 4784 ...   Interconnection Cord Overview complete Cord Sets 10 A, Interconnection, 2.0 m, IEC H05VV-F3G1.0, black 6007.0204 Cord Sets 10 A, Interconnection, 1.0 m, Connector IEC C13, H05VV-F3G1.0, black 6007.0212 Cord Sets 10 A, Interconnection, 2.0 m, Connector IEC C13, H05VV-F3G1.0, black 6007.0214   Power Supply Cord Overview complete Cord Sets 10 A, Europlug, 2.5 m, Connector IEC C13, H05VV-F3G1.0, black 6004.0215 Cord Sets 10 A, Europlug, 2.5 m, Connector IEC C13, H05VV-F3G1.0, black 6003.0215 Cord Sets 10 A, uninsulated wires, 2.0 m, Connector IEC C13, H05VV-F3G1.0, black 6000.0224 Cord Sets 10 A, uninsulated wires, 2.0 m, Connector IEC C13, H05VV-F3G1.0, black 6000.0214 Cord Sets 10 A, United Kingdom, 2.5 m, Connector IEC C13, H05VV-F3G1.0, black 6044.0215 ...   Power Supply or Interconnection Cord Overview complete Cord Sets 10 A, United Kingdom, 2.0 m, Connector IEC H05VV-F3G1.0, black   4 Connectors 6044.0204 Order Number GSP1 Connectors (Inlets/Outlets) https://www.schurter.com /PG07 Mating Outlets/Connectors shuttered Connector Overview complete 4783 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4783   Power Cord Overview complete VAC13KS, Overview, V-Lock cord retaining, diverse Connector IEC C13, diverse, black VAC13KS VAC17KS, V-Lock cord retaining, diverse m, Connector IEC C17, diverse, black / grey / white VAC17KS 05.01.2022   The specifications, descriptions and illustrations indicated in this document are based on current information. All content is subject to modifications and amendments. Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability and test each product selected for their own applications. Connectors 5