GSP4
Connectors (Inlets/Outlets)
https://www.schurter.com /PG07
IEC Appliance Inlet C20 or C24, Split panel or screw-on mounting, PCB Terminal
Split panel mounting, Snap-in PCB 1.6 mm,
Additional earth terminal 90° to connector axis
C20
Split panel mounting, Screw-on PCB,
Additional earth terminal 90° to connector axis
Screw-on panel mounting,
Snap-in PCB 1.6 mm,
Additional earth terminal in connector axis
C24
See below:
Approvals and Compliances
70° C
70° C
Description
- Panel mount :
Splitpanel (sandwich) or screw-on from backside
- Appliance Inlet , Pin temperature 70 °C , protection class I or II
- V-Lock notch standard
- Additional ground terminal
- Safety of electrical appliances for household and similar purposes.
Meets the requirements for appliances in unattended use. This includes the enhanced requirements of glow wire tests acc. to IEC 606952-11 or -12 & -13.
- Variants with protection cover on rear side
- For PCB mounting: screw-on or snap-in 1.6 mm
Technical Data
Other versions on request
- Further colours on request
Weblinks
pdf data sheet, html datasheet, General Product Information, Approvals,
Distributor-Stock-Check, Accessories, Detailed request for product,
Landing Page
Ratings IEC
Ratings UL/CSA
Dielectric Strength
Allowable Operation Temperature
IP-Protection
Protection against electric
shock
Terminal
Panel Thickness S
Material: Housing
16 A / 250 VAC; 50 Hz
20 A / 250 VAC; 60 Hz
> 1.5 kVAC between L-N
> 1.5 kVAC between L/N-PE
(1 min/50 Hz)
-25 °C to 70 °C
Appliance inlet/-outlet
C20 or C24 acc. to IEC 60320-1
UL 60320-1, CSA C22.2 no. 60320-1
(for cold conditions) pin-temperature 70
°C, 16 A, Protection Class I or II
from front side IP20 acc. to IEC 60529
Suitable for appliances with protection
class I or II acc. to IEC 61140
PCB terminals , additional ground terminal
for sandwich mounting
1/1.2/1.5/2/2.5/3/4 mm
Thermoplastic, black, UL 94V-0
Approvals and Compliances
Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about
Approvals
SCHURTER products are designed for use in industrial environments. They have approvals from independent testing bodies according to national
and international standards. Products with specific characteristics and requirements such as required in the automotive sector according to IATF
16949, medical technology according to ISO 13485 or in the aerospace industry can be offered exclusively with customer-specific, individual agreements by SCHURTER.
Approvals
The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products.
Approval Reference Type: GSP4
Approval Logo
Certificates
Certification Body
Description
VDE Approvals
VDE
Certificate Number: 40035923
UL Approvals
UL
UL File Number: E96454
CCC Approvals
CCC
CCC Certificate Number: 2020180204014249, 2020180204014250
Connectors
1
GSP4
Connectors (Inlets/Outlets)
https://www.schurter.com /PG07
Product standards
Product standards that are referenced
Organization
Design
Standard
Description
Designed according to
IEC 60320-1
Appliance couplers for household and similar general purposes
Designed according to
UL 60320-1
Standard for Attachment Plugs and Receptacles
Designed according to
CSA C22.2 no. 60320-1
General Use Receptacles, Attachment Plugs, and Similar Wiring Devices
Design
Standard
Description
Designed for applications acc.
IEC/UL 62368-1
IEC 62368-1 includes the basic requirements for safety of audio, video,
information technology and office equipment.
Designed for applications acc.
IEC 60335-1
Safety of electrical appliances for household and similar purposes. Meets
the requirements for appliances in unattended use. This includes the
enhanced requirements of glow wire tests acc. to IEC 60695-2-11 or -12
& -13.
Details
Initiator
Description
CE declaration of conformity
SCHURTER AG
The CE marking declares that the product complies with the applicable
requirements laid down in the harmonisation of Community legislation on
its affixing in accordance with EU Regulation 765/2008.
RoHS
SCHURTER AG
Directive RoHS 2011/65/EU, Amendment (EU) 2015/863
China RoHS
SCHURTER AG
The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March
2007. It is similar to the EU directive RoHS.
REACH
SCHURTER AG
On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration,
Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as
"REACH") entered into force.
Landing Page V-Lock
SCHURTER AG
V-Lock system are based on a matching plug-dose combination. The
connector is equipped with a notch intended for use with the latching
cordset. The cord latching system prevents against accidental removal of
the cordset.
White Paper Glow wire test
SCHURTER AG
Meets the requirements of IEC 60335-1 for appliances in unattended use.
This includes the enhanced requirements of glow wire tests acc. to IEC
60695-2-11 or -12 &-13.
Application standards
Application standards where the product can be used
Organization
Compliances
The product complies with following Guide Lines
Identification
2
Connectors
GSP4
Connectors (Inlets/Outlets)
https://www.schurter.com /PG07
Dimensions [mm]
Split panel mounting / Snap-in on PCB
34.9
B
18.75
Y
A
26.9
Z
2)
+0.1
0
ø 2.2
32.4
37.9
PCII w/o
8.3
24.4
6.2
Panel
max.R4.5
ø 6 ± 0.05
6.7
19
15.1
+0.1
0
32 ± 0.1
Dimension A B
Y Z
Quick connect 6.3x0.8 mm
40.3
15.0
30.0
25.9
Solder
37.3 15.0 30.0 22.9
2) with protection cover
Split panel mounting / Screw-on mounting on PCB
34.9
B
18.75
Y
A
26.9
Z
1)
2)
+0.1
0
ø 2.2
37.9
32.4
PCII w/o
8.3
24.4
6.2
Panel
max.R4.5
ø 3.4
6.7
19
15.1
+0.1
0
32 ± 0.1
Dimension A B
Y Z
Quick connect 6.3x0.8 mm
40.3
15.0
30.0
25.9
Solder
37.3 15.0 30.0 22.9
1) Mounting screw torque max. 0.3 Nm
2) with protection cover
Connectors
3
GSP4
Connectors (Inlets/Outlets)
https://www.schurter.com /PG07
Screw-on rear side / Snap-in on PCB
34.9
B
18.75
Y
A
26.9
Z
2)
15.1
+0.1
0
ø 2.2
PCII w/o
27
8.3
ø 6 ± 0.05
8.3
R6
4.6
21.1
ø3.4/M3
35
60
48
+0.1
0
32 ± 0.1
± 0.1
Dimension A B
Y Z
Quick connect 6.3x0.8 mm
40.3
17.1
30.0
28.0
Solder
37.3 17.1 30.0 25.0
2) with protection cover
Screw-on rear side / Screw-on mounting on PCB
34.9
B
18.75
Y
A
26.9
Z
1)
2)
15.1
+0.1
0
ø 2.2
PCII w/o
27
8.3
60
8.3
35
48
Dimension A B
Y Z
Quick connect 6.3x0.8 mm
40.3
17.1
30.0
28.0
Solder
37.3 17.1 30.0 25.0
1) Mounting screw torque max. 0.3 Nm
2) with protection cover
4
ø 3.4
R6
4.6
21.1
ø3.4/M3
Connectors
+0.1
0
± 0.1
32 ± 0.1
GSP4
Connectors (Inlets/Outlets)
https://www.schurter.com /PG07
All Variants
Protection
Class
Panel mounting
Panel Thickness s [mm]
PCB mounting
Additional ground terminal
Terminal
Terminal direction
Cover
Order Number
I
Sandwich
1.0
Screw
solder terminal
90° to connector axis
none
GSP4.010C.11
I
Sandwich
1.5
Screw
Quick connect terminal 6.3 x 0.8 mm
straight
none
GSP4.0107.13
I
Sandwich
1.5
Screw
solder terminal
90° to connector axis
none
GSP4.010C.13
I
Sandwich
1.5
Snap-in
Quick connect terminal 6.3 x 0.8 mm
90° to connector axis
none
GSP4.0205.13
I
Sandwich
1.5
Snap-in
Quick connect terminal 6.3 x 0.8 mm
straight
none
GSP4.0207.13
I
Sandwich
3.0
Snap-in
Quick connect terminal 6.3 x 0.8 mm
straight
none
GSP4.0207.16
I
Sandwich
3.0
Snap-in
Quick connect terminal 6.3 x 0.8 mm
straight
mounted
GSP4.0217.16
I
Screw
-
Screw
Quick connect terminal 6.3 x 0.8 mm
straight
none
GSP4.0107.10
I
Screw
-
Snap-in
Quick connect terminal 6.3 x 0.8 mm
90° to connector axis
none
GSP4.0205.10
I
Screw
-
Snap-in
Quick connect terminal 6.3 x 0.8 mm
straight
none
GSP4.0207.10
I
Screw
-
Snap-in
Quick connect terminal 6.3 x 0.8 mm
straight
mounted
GSP4.0217.10
II
Sandwich
1.5
Snap-in
-
-
mounted
GSP4.0210.13
█ Most Popular.
Availability for all products can be searched real-time:https://www.schurter.com/en/Stock-Check/Stock-Check-SCHURTER
With screw mounting on PCB, 2 screws are included
Packaging unit
50 Pcs
Mating Outlets/Connectors
Category / Description
Appliance Outlet Overview complete
5017, Mounting: Screw-on mounting, 250 VAC, 16 A, Appliance Outlet: IEC
5017
Appliance Outlet further types to GSP4
Connector Overview complete
4795, Mounting: Power Cord, Cable Connector: IEC C19
4795
4790, Mounting: Power Cord, Screw Connector: IEC C19
4790
Connector further types to GSP4
Power Supply Cord Overview complete
Cord Sets 16 A, Europlug, 2.5 m, Connector IEC C19, H05VV-F3G1.5, black
6004.0395
Cord Sets 16 A, Interconnection, 1.0 m, Connector IEC C19, H05VV-F3G1.5, black
6020.0392
Cord Sets 16 A, Interconnection, 2.0 m, Connector IEC C19, H05VV-F3G1.5, black
6020.0394
Power Supply Cord further types to GSP4
Connectors
5
█
GSP4
Connectors (Inlets/Outlets)
https://www.schurter.com /PG07
Mating Outlets/Connectors shuttered
Power Cord Overview complete
VAC19KS, Overview, V-Lock cord retaining, diverse Connector IEC C19, diverse, black
VAC19KS
Power Cord further types to GSP4
04.06.2020
6
Connectors
The specifications, descriptions and illustrations indicated in this document are based on current
information. All content is subject to modifications and amendments. Information furnished is believed
to be accurate and reliable. However, users should independently evaluate the suitability and test each
product selected for their own applications.
