Power entry modules without line filter www.schurter.com/pg05 IEC Appliance Inlet C14 with Fuseholder 1- or 2-pole and Voltage Selector
KE
Standard or Medical Fuse drawer
C14
70° C
Description
- Panel Mount: Screw-on version from front or rear side, snap-in version from front side - 3 Functions: Appliance Inlet Protection class I, Fuseholder with interchangeable fuse drawer for Fuse-links 5 x 20 mm or 6.3 x 32 mm 1- or 2-pole, Voltage Selectors (series-parallel) - Quick connect terminals 4.8 x 0.8 mm - Alternative: version with line filter CE
Characteristics
- Available with or without internal partial wired connections - For added safety "Extra-Safe" fuse drawers are available Fuse drawer meets requirements of medical standard IEC/EN 60601-1 The fuse drawer can only be opened with the aid of a tool The fuseholder is accessible from the equipment front - Qualified for use in equipment according IEC/EN 60950
Other versions on request
- For protection class II
Approvals
References Weblinks
- VDE License Number: 40011908 - UL License Number: E93617 - CSA License Number: 38456
General Product Information Approvals, RoHS, CHINA-RoHS, Mating Connectors, e-Store, Distributor-Stock-Check, Accessories
Technical Data
Ratings IEC Ratings UL/CSA Dielectric Strength 10 A / 250 VAC; 50 Hz 10 A / 125 VAC; 60 Hz > 3 kVAC between L-N > 4 kVAC between L/N-PE (1 min/50 Hz) -25 °C to 70 °C from front side IP 40 acc. to IEC 60529 Suitable for appliances with protection class 1 acc. to IEC 61140 Quick connect terminals 4.8 x 0.8 mm Screw: max 8 mm Mounting screw torque max 0.5 Nm Snap-in: 1.5/2/2.5 mm Thermoplastic, black, UL 94V-0 Appliance Inlet C14 acc. to IEC/EN 60320-1, UL 498, CSA C22.2 no. 42 (for cold conditions) pin-temperature 70 °C, 10 A, Protection Class 1 1 or 2 pole, Shocksafe category PC2 acc. to IEC 60127-6, for fuse-links 5 x 20 or 6.3 x 32 mm 5 x 20: 2.5 W (1 pole)/ 2 W (2-pole) per pole 6.3 x 32: 3.15 W (1 pole)/ 2.5 W (2-pole) per pole Admissible power acceptance at higher ambient temperature see derating curves series-parallel, 4, 3 or 2 switch positions or usable as 2-pole change-over switch
Fuseholder
Allowable Operation Temp. Degree of Protection Protection Class Terminal Panel Thickness s
Rated Power Acceptance @ Ta 23 °C
Power Acceptance @ Ta > 23°C Voltage Selectors
Material: Housing
Connectors
KE
www.schurter.com/pg05 Dimensions Screw on PCB mounting Snap-in mounting
Power entry modules without line filter
69.5 mm
30 R6 R 4.5 4.8x0.8
55 ø 3.2
M3/ø 3.6 30 ø 6.3x90˚ R 4.5 4.8x0.8
55 S ±0.1
230
61.5 ±0.15
+0.3 0
230
52.2
69.5 61.5
52.5
52.2
R 3 -0.2 18 R 3.1 27.2 27.5 2 2.2
+0.2 27.5 0
0
R 3 -0.2 18 R 3.1 27.2 27.5 2 2.2 27.5
+0.2 0
0
Diagrams with partial wired internal connections
with partial wired
without internal connections
without internal connections
1-pole
2-pole
1-pole
2-pole
Derating Curves Fuses 5 x 20 mm (1-pole)
2.5
Fuses 5 x 20 mm (2-pole, per pole)
2.0
Admissible power acceptance in Watt
2.0 1.5 1.0 0.5 0.0 0 20 40 60 80 100 I = 1.0 In I = 0.7 In I = < < In
Admissible power acceptance in Watt per pole
1.5 I = 1.0 In 1.0 I = 0.7 In I = < < In 0.5
0.0 0 20 40 60 80 100
Ambient air temperature Ta °C
Ambient air temperature Ta °C
Fuses 6.3 x 32 mm (1-pole)
3.15
Fuses 6.3 x 32 mm (2-pole, per pole)
2.5
Admissible power acceptance in Watt
Admissible power acceptance in Watt per pole
2.5 2.0 1.5 1.0 0.5 0.0
0 20 40 60 80 100
2.0 1.5 1.0 0.5 0.0 0 20 40 60 80 100 I = 1.0 In I = 0.7 In I = < < In
I = 1.0 In I = 0.7 In I = < < In
Ambient air temperature Ta °C
Ambient air temperature Ta °C
Connectors
52.5
55
+0.3 0
Power entry modules without line filter www.schurter.com/pg05 Variants
Fuseholder and voltage selector insert must be ordered separately
Panel mounting Screw Screw Screw Screw Snap-in Snap-in Snap-in Snap-in Snap-in Snap-in Snap-in Snap-in Snap-in Snap-in Snap-in Snap-in Panel Thickness s [mm] 1.5 2 2.5 1.5 2 2.5 1.5 2 2.5 1.5 2 2.5 Fuseholder 1-pole 1-pole 2-pole 2-pole 1-pole 1-pole 1-pole 1-pole 1-pole 1-pole 2-pole 2-pole 2-pole 2-pole 2-pole 2-pole Internally wired unwired partially wired unwired partially wired unwired unwired unwired partially wired partially wired partially wired unwired unwired unwired partially wired partially wired partially wired Order Number KE15.1100.151 KE16.5100.151 KE10.2100.151 KE10.6100.151 KE15.1100.105 KE15.1100.107 KE15.1100.109 KE16.5100.105 KE16.5100.107 KE16.5100.109 KE10.2100.105 KE10.2100.107 KE10.2100.109 KE10.6100.105 KE10.6100.107 KE10.6100.109
KE
Packaging unit Required Accessory
20 Pcs
Description
Jumper Wire 1 Connection with Stranded Cable Type B, 100 Type B, 100 Type A, 100 Type A, 100 Fusedrawer 1 Fusedrawer for Fuse Links 5x20mm resp.. 6.3x32mm 5 x 20, 2-pole 5 x 20, 1-pole 6.3 x 32, 2-pole 6.3 x 32, 1-pole 4305.0001 4305.0006 4305.0011 4305.0016 ... Voltage Selectors Insert 1 Voltage Selector Insert to KE, CE, KG, CG 3 or 4 switch positions 1, 3 or 4 switch positions, 100, 120, 220, 240 3, 3 or 4 switch positions, 130, 110, 240, 220 2, 2 switch positions, 110, 220 4305.0048.00 4305.0048.01 4305.0048.02 4305.0048.03 ... 0881.0074 0881.0075 0881.0076 0881.0077
Connectors
KE
www.schurter.com/pg05 Accessories
Power entry modules without line filter
Assorted Covers Rear Cover 0859.0076
Cord retaining kits Cord retaining strain relief Flat head, A 4700.0001
Mating Outlets/Connectors
Category / Description
Appliance Outlet Overview complete IEC Appliance Outlet F, Screw-on Mounting, Front Side, Solder or Quick-connect Terminal IEC Appliance Outlet F, Snap-in Mounting, Front Side, Solder or Quick-connect Terminal IEC Appliance Outlet F or H, Screw-on Mounting, Front Side, Solder, PCB or Quick-connect Terminal IEC Appliance Outlet F or H, Screw-on Mounting, Front Side, Solder or Quick-connect Terminal Appliance Outlet further types to KE Connector Overview complete IEC Connector C15, Rewireable, Straight IEC Connector C15A, Rewireable, Straight IEC Connector C15A, Rewireable, Straight IEC Connector C15A, Rewireable, Angled IEC Connector C13, Rewireable, Angled Connector further types to KE Power Cord Overview complete Power Cord with IEC Connector C13, Angled Power Cord with IEC Connector C13, Angled Power Cord with IEC Connector C13, Angled Power Cord with IEC Connector C13, Angled Power Cord with IEC Connector C13 Power Cord further types to KE 0311 3011 3012 3013 3020 ... 0101 0102 0102-G 0112 4012 ... 4787 4788 5091 5092
The specifications, descriptions and illustrations indicated in this document are based on Connectors current information. All content is subject to modifications and amendments.
