KG10.6101.105

KG Power entry modules without line filter https://www.schurter.com /PG05 IEC Appliance Inlet C14 with Fuseholder 1- or 2-pole, Line Switch 2-pole and Voltage Selector IEC connector C14 with fuse holder 1- or 2-pole with voltage selector and line switch 2-pole Screw-on version from front or rear side Snap-in version from front side C14 See below: Approvals and Compliances 70° C Description - Panel mount : Screw-on version from front or rear side, snap-in version front side - 4 Functions : Appliance Inlet , Protection class I Line Switch , 2‑pole Fuseholder with interchangeable fuse drawer for Fuse-links 5x20 mm or 6.3x32 mm , Voltage Selector Meets the requirements of IEC 60335-1 for appliances in unattended use. This includes the enhanced requirements of glow wire tests acc. to IEC 60695-2-12 and -13. - Quick connect terminals 4.8 x 0.8 mm Characteristics - All single elements are already partially wired - For added safety "Extra-Safe" fuse drawers are available - Suitable for use in equipment according to IEC/UL 62368-1 Other versions on request - Line switch, illuminated - Line switch with other rocker marking - Line switch 1-pole - For protection class II References Alternative: version with line filter   CG  Weblinks pdf data sheet, html datasheet, General Product Information, Approvals, Distributor-Stock-Check, Accessories, Detailed request for product Newly available variants corresponding to V-Lock mating cordset. The connector is equipped with a notch intended for use with the latching cordset. The cord latching system prevents against accidental removal of the cordset. Technical Data Ratings IEC Ratings UL/CSA Dielectric Strength Allowable Operation Temperature IP-Protection Protection against electric shock Terminal Panel Thickness S Material: Housing   10 A / 250 VAC; 50 Hz 10 A / 250 VAC; 60 Hz > 3 kVAC between L-N > 4 kVAC between L/N-PE (1 min/50 Hz) -25 °C to 70 °C Appliance inlet/-outlet front side IP40 acc. to IEC 60529 Suitable for appliances with protection class I acc. to IEC 61140 Quick connect terminals 4.8 x 0.8 mm Screw: max 8 mm Mounting screw torque max 0.5 Nm Snap-in: 1.5/2/2.5 mm Thermoplastic, black, UL 94V-0 Rated Power Acceptance @ Ta 23 °C Fuseholder Power Acceptance @ Ta > 23°C Line Switch Voltage Selector C14 acc. to IEC 60320-1, UL 60320-1, CSA C22.2 no. 60320-1 (for cold conditions) pin-temperature 70 °C, 10 A, Protection Class I 1-/2-pole, Shocksafe category PC2 acc. to IEC 60127-6, for fuse-links 5 x 20 / 6.3 x 32 mm 5 x 20: 2.5 W (1 pole)/ 2 W (2-pole) per pole 6.3 x 32: 3.15 W (1 pole)/ 2.5 W (2-pole) per pole Admissible power acceptance at higher ambient temperature see derating curves Rocker switch 2-pole, non-illuminated, acc. to IEC 61058-1 Technical Details series-parallel, 4, 3 or 2 switch positions or usable as 2-pole change-over switch Approvals and Compliances Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in  Details about Approvals SCHURTER products are designed for use in industrial environments. They have approvals from independent testing bodies according to national and international standards. Products with specific characteristics and requirements such as required in the automotive sector according to IATF 16949, medical technology according to ISO 13485 or in the aerospace industry can be offered exclusively with customer-specific, individual agreements by SCHURTER. Connectors 1 KG Power entry modules without line filter https://www.schurter.com /PG05 Approvals The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products. Approval Reference Type: KG Approval Logo Certificates Certification Body Description VDE Approvals VDE Certificate Number: 40046766 UL Approvals UL UR File Number: E93617 Design Standard Description Designed according to IEC 60320-1 Appliance couplers for household and similar general purposes Designed according to IEC 60127-6 Miniature fuses. Part 6. Fuse-holders for miniature fuse-links Designed according to IEC 61058-1 Switches for appliances. Part 1. General requirements Designed according to UL 60320-1 Standard for Attachment Plugs and Receptacles Designed according to CSA C22.2 no. 60320-1 General Use Receptacles, Attachment Plugs, and Similar Wiring Devices Design Standard Description Suitable for applications acc. IEC/UL 62368-1 Audio/video, information and communication technology equipment - Part 1: Safety requirements Suitable for applications acc. IEC 60601-1 Medical electrical equipment - Part 1: General requirements for basic safety and essential performance Suitable for applications acc. IEC 60335-1 Safety of electrical appliances for household and similar purposes. Meets the requirements for appliances in unattended use. This includes the enhanced requirements of glow wire tests acc. to IEC 60695-2-11 or -12 & -13. Details Initiator Description CE declaration of conformity SCHURTER AG The CE marking declares that the product complies with the applicable requirements laid down in the harmonisation of Community legislation on its affixing in accordance with EU Regulation 765/2008. UKCA declaration of conformity SCHURTER AG The UKCA marking declares that the product complies with the applicable requirements laid down in the British Amendment of Regulation (EC) 765/2008. RoHS SCHURTER AG Directive RoHS 2011/65/EU, Amendment (EU) 2015/863 China RoHS SCHURTER AG The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March 2007. It is similar to the EU directive RoHS. REACH SCHURTER AG On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration, Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as "REACH") entered into force. SCHURTER AG V-Lock system are based on a matching plug-dose combination. The connector is equipped with a notch intended for use with the latching cordset. The cord latching system prevents against accidental removal of the cordset. White Paper Glow wire test SCHURTER AG Meets the requirements of IEC 60335-1 for appliances in unattended use. This includes the enhanced requirements of glow wire tests acc. to IEC 60695-2-11 or -12 &-13. Medical Equipment SCHURTER AG Suitable for use in medical equipment according to IEC/UL 60601-1 (1 MOOP, 1 MOPP) Product standards Product standards that are referenced Organization Application standards Application standards where the product can be used Organization Compliances The product complies with following Guide Lines Identification 2 Connectors KG Power entry modules without line filter https://www.schurter.com /PG05 Dimensions [mm] Screw-on mounting 55 30 M3/ø 3.6 4.8x0.8 89 ±0.15 80 97 89 79.7 +0.3 0 230 ø 6.3x90° R 4.5 ø 3.2 R6 0 R 3 -0.2 18 R 3.1 2 2.2 30 27.2 27.5 +0.2 0 Snap-in mounting 55 30 S ±0.1 4.8x0.8 +0.3 80 0 79.7 82.5 230 R 4.5 0 R 3 -0.2 18 R 3.1 27.2 30 2 2.2 Connectors 27.5 +0.2 0 3 KG Power entry modules without line filter https://www.schurter.com /PG05 Diagrams with partial wired with partial wired 5 6 7 8 9 10 PE L 3 1-pole N 4 5 6 7 8 9 10 N 4 PE L 3 2-pole Derating Curves Fuses 5 x 20 mm (1-pole) Fuses 5 x 20 mm (2-pole, per pole) Admissible power acceptance in Watt per pole Admissible power acceptance in Watt 2.5 2.0 I = 1.0 In 1.5 I = 0.7 In I =