Power entry modules without line filter www.schurter.com/pg05 IEC Appliance Inlet C14 with Fuseholder 2-pole, Line Switch 1- or 2-pole
KM
Plug removal necessary for fuse replacement
KM with shield
C14
70° C
Description
- Panel Mount: Snap-in version from front side - 3 Functions: Appliance Inlet Protection class I, Line Switch 2-pole, Fuseholder for fuse-links 5 x 20 mm 1- or 2-pole - Quick connect terminals 4.8 x 0.8 mm - Alternative: version with line filter KMF - Alternative: version for screw mounting DD11 - With cover on rear-side
- Ultra-compact design. Small dimensions in front of and behind the panel - All single elements are already wired - For added safety "Extra-Safe" fuse drawers are available Fuse drawer meets requirements of medical standard IEC/EN 60601-1 The fuse drawer can only be opened with the aid of a tool The fuseholder is accessible from the equipment front - Ideal for application with high transient loads - Qualified for use in equipment according IEC/EN 60950
Characteristics
Approvals
Other versions on request
- VDE License Number: 40021981 - UL License Number: E93617
- Fuse drawer 1-pole, plus spare fuse case - Fuse drawer 2-pole, with shorting bar - Line switch 1-pole - Other rocker marking - Protection class II, 70°C
References Weblinks
General Product Information Approvals, RoHS, CHINA-RoHS, Mating Connectors, e-Store, Distributor-Stock-Check, Accessories
Technical Data
Ratings IEC Ratings UL/CSA Dielectric Strength 10 A / 250 VAC; 50 Hz 10 A / 250 VAC; 60 Hz > 2.5 kVAC between L-N > 3 kVAC between L/N-PE (1 min/50 Hz) -25 °C to 70 °C from front side IP 40 acc. to IEC 60529 Suitable for appliances with protection class 1 acc. to IEC 61140 Quick connect terminals 4.8 x 0.8 mm , tin-plated Snap-in: 1/1.5/2/2.5 mm (all steps with one variant) Thermoplastic, black, UL 94V-0 Appliance Inlet C14 acc. to IEC/EN 60320-1, UL 498, CSA C22.2 no. 42 (for cold conditions) pin-temperature 70 °C, 10 A, Protection Class 1 1 or 2 pole, Shocksafe category PC2 acc. to IEC 60127-6, for fuse-links 5 x 20 mm 5 x 20: 2 W (1 pole)/ 1.4 W (2-pole) per pole Choose fuse-links for 2-pole version in such a way that the typical power acceptance is less than 1.4 W for each pole Admissible power acceptance at higher ambient temperature see derating curves Rocker switch 2-pole, non-illuminated, acc. to IEC 61058-1 Technical details
Fuseholder
Allowable Operation Temp. Degree of Protection Protection Class Terminal Panel Thickness s Material: Housing
Rated Power Acceptance @ Ta 23 °C
Power Acceptance @ Ta > 23°C Line Switch
Connectors
KM
www.schurter.com/pg05 Dimensions KM without shield
50 mm
Power entry modules without line filter
30.35 25.7
.5 R1
0
46.8 50
L’ N’ 47 -0.05
+0.10
10.7
S ±0.05 3.2 26.15 2.5 27.8
PE’
m
ax
.R
30.5
KM with shield
30.4 25.7
R1 .5
0
47.5 50
L’ 47.8 -0.05
+0.10
N’
10.7
S ±0.05 10 26.2 2.5 28.5
PE’
m
ax
.R
30.5
28.8 -0.05
Diagrams with shield
1) Line 2) Load
Connectors
0.
+0.10
3
0.
28 -0.05
3
+0.10
Power entry modules without line filter www.schurter.com/pg05
KM
2-pole
Admissible power acceptance in Watt per pole
1.4 1.2 1.0 0.8 0.6 0.4 0.2 0.0 0 20 40 60 80 100 I = 1.0 In I = 0.7 In I = < < In
Derating Curves 1-pole
Admissible power acceptance in Watt
2.0
1.5 I = 1.0 In 1.0 I = 0.7 In I = < < In 0.5
0.0 0 20 40 60 80 100
Ambient air temperature Ta °C
Ambient air temperature Ta °C
Variants
Fuse drawer must be ordered separately (see accessories). Fingergrip and Extra Safe. The same drawer as used by type KEA.
Fuseholder 1-pole 2-pole 1-pole 2-pole Line Switch 2-pole 2-pole 2-pole 2-pole EMC-Shielding With EMC-shield and without line filter With EMC-shield and without line filter Order Number KM00.1205.11 KM00.1105.11 KM01.1205.11 KM01.1105.11
Packaging unit Required Accessory
50 Pcs
Description Fusedrawer 2 Fusedrawer with and without Voltage Selector Insert Fingergrip, 2-pole Extra-Safe, 2-pole Fingergrip, 1-pole Extra-Safe, 1-pole 4301.1401 4301.1403 4301.1405 4301.1407 ...
Accessories
Assorted Covers Rear Cover 0859.0076
Cord retaining kits Cord retaining strain relief Flat head, A 4700.0001
Connectors
KM
www.schurter.com/pg05 Mating Outlets/Connectors
Category / Description
Power entry modules without line filter
Appliance Outlet Overview complete IEC Appliance Outlet F, Screw-on Mounting, Front Side, Solder or Quick-connect Terminal IEC Appliance Outlet F, Snap-in Mounting, Front Side, Solder or Quick-connect Terminal IEC Appliance Outlet F or H, Screw-on Mounting, Front Side, Solder, PCB or Quick-connect Terminal IEC Appliance Outlet F or H, Screw-on Mounting, Front Side, Solder or Quick-connect Terminal Appliance Outlet further types to KM Connector Overview complete IEC Connector C15, Rewireable, Straight IEC Connector C15A, Rewireable, Straight IEC Connector C15A, Rewireable, Straight IEC Connector C15A, Rewireable, Angled IEC Connector C13, Rewireable, Angled Connector further types to KM Power Cord Overview complete Power Cord with IEC Connector C13, Angled Power Cord with IEC Connector C13, Angled Power Cord with IEC Connector C13, Angled Power Cord with IEC Connector C13, Angled Power Cord with IEC Connector C13 Power Cord further types to KM 0311 3011 3012 3013 3020 ... 0101 0102 0102-G 0112 4012 ... 4787 4788 5091 5092
The specifications, descriptions and illustrations indicated in this document are based on Connectors current information. All content is subject to modifications and amendments.
