KP01.1013.01

Power entry modules without line filter KP (Outlet) www.schurter.com/pg05 IEC Appliance Inlet C14 with Appliance Outlet F Inlet with outlet KPF Filter Module (not enclosed) C14 70° C F 70° C Description - Panel Mount: Sandwich/rear-side - 2 Functions: Appliance Inlet Protection class I, Connector Protection class I - For PCB mounting - Alternative: version with line filter KPF; KPS Characteristics Approvals - Panel mount from rear or "sandwich" between top and bottom/side to side panels PCB mount with snap-in or screw-on feet (self tapping screws Ø 3 x 8 mm) - All single elements are already wired - Insulation cover on the rear-side - Qualified for use in equipment according IEC/EN 60950 - VDE License Number: 40008635 - UL License Number: E103791 - CSA License Number: 38456 Other versions on request - Solder terminals - Quick-connect terminals - For protection class II References Weblinks General Product Information Approvals, RoHS, CHINA-RoHS, Mating Connectors, e-Store, Distributor-Stock-Check, Accessories Technical Data Ratings IEC Ratings UL/CSA Dielectric Strength 10 A / 250 VAC; 50 Hz 10 A / 125 VAC; 60 Hz > 2.3 kVAC between L-N > 2.8 kVAC between L/N-PE (1 min/50 Hz) -25 °C to 70 °C from front side IP 40 acc. to IEC 60529 Suitable for appliances with protection class 1 acc. to IEC 61140 For PCB mounting Quick connect terminals 4.8 x 0.8 mm Solder terminal on request Snap-in: 1.5/2/2.5/3 mm Thermoplastic, black, UL 94V-0 Appliance Inlet / Appliance Outlet C14 acc. to IEC/EN 60320-1 and F acc. to IEC/EN 60320-2-2, UL 498, CSA C22.2 no. 42 (for cold conditions) pin-temperature 70 °C, 10 A, Protection Class 1 Allowable Operation Temp. Degree of Protection Protection Class Terminal Panel Thickness s Material: Housing Connectors  KP (Outlet) www.schurter.com/pg05 Dimensions Screw on PCB mounting 56.1 2 2 52.1 2 R2 31.2 27.8 2 2 Power entry modules without line filter Snap-in mounting 56.1 mm 56.1 52.1 2 R2 31.2 27.8 36.5 18.5 4.5 1.6 ±0.1 2 2.5 A 2 4.5 2.9 18.5 0.8 20.2 1.3 6.2 1.3 1.1 53.34 50.1 4.5 1.1 1.1 1.3 ø 5.9 53.34 50.1 36.5 36 32 36 32 1.1 0.8 20.2 1.3 6.2 ø 5.9 -0.1 0 16 S ±0.1 A = for PCB-thickness 1.2/1.6/2.0/2.4 mm Additional quick connect terminal 4.8 x 0.8 mm Additional quick connect terminal 4.8 x 0.8 mm s = panel thickness For 2-pole inlet/switch, 2-pole inlet fuseholder and inlet/outlet 53.34 25.4 7.62 3.82 27.94 +0.1 0 for combinations: inlet/switch 1-pole Inlet/ fuseholder 1-pole 13.97 10.16 5.08 D1 25.4 1.6 +0.1 0 S ±0.1 (16.45) D1 D2 X ±0.1 1.6 D2 7.55 S ±0.1 S and X see mounting holes Mounting holes for backside mounting Sandwich mounting holes Sandwich mounting holes 32.3 ±0.1 32.3 ±0.1 18.5 X ±0.1 52.4 ±0.1 32.3 ±0.1 X ±0.1 X = 48.4 at S = 1.5 and 2.5 X = 50.4 at S = 2.0 and 3.0 X = 48.4 at S = 1.5 and 2.5 X = 50.4 at S = 2.0 and 3.0 Dimensions Stable snap feet requires minimal insertion force Module must lay flat on the PCB when soldering Screw-on mount uses self-tapping screws  Connectors 16 10.16 10.16 Power entry modules without line filter KP (Outlet) www.schurter.com/pg05 Insertion from behind Other dimensions as for 2-poles d1 = 6 ± 0.05 for (snap-in) d1 = 3.6 (screw-on) d2 = 2 ± 0.1 (screw-on) Dimensions without tolerance: ≤ 15 = ± 0.05; ≥ 15 = ± 0.1 "Sandwich" mounting with split enclosure panels Diagrams Inlet with outlet Derating Curves 1-pole Admissible power acceptance in Watt 2.0 2-pole Admissible power acceptance in Watt per pole 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0.0 0 20 40 60 80 100 I = 1.0 In I = 0.7 In I = < < In 1.5 I = 1.0 In 1.0 I = 0.7 In I = < < In 0.5 0.0 0 20 40 60 80 100 Ambient air temperature Ta °C Ambient air temperature Ta °C Variants Panel mounting Screw Screw Snap-in Snap-in Panel Thickness s [mm] 2 3 2 3 PCB [mm] 1.2/1.6/2.0/2.4 1.2/1.6/2.0/2.4 1.6 1.6 Line Switch Fuseholder Connector F F F F Order Number KP01.1052.01 KP01.1053.01 KP01.1012.01 KP01.1013.01 Type KP without cover: KP01.XXXX.XX90 Ground Terminal with solder pin: KP01.XXXX.X3XX Packaging unit 50 Pcs Connectors  KP (Outlet) www.schurter.com/pg05 Mating Inlets/Plugs Category / Description Interconnection Cord Overview complete Interconnection Cord with IEC Plug E, Angled Interconnection Cord with IEC Plug E, Angled Interconnection Cord with IEC Plug E, Straight Interconnection Cord with IEC Plug G, Angled Interconnection Cord with IEC Plug G, Angled Interconnection Cord further types to KP (Outlet) Plug Overview complete IEC Plug E, Cord Connector (Rewireable), Straight, max. cable Diameter 8.5 mm IEC Plug E, Cord Connector (Rewireable), Angled, max. Cable Diameter 10 mm IEC Plug E, Cord Connector (Rewireable), Straight, max. Cable Diameter 10 mm IEC Plug E, Cord Connector (Rewireable), Angled, max. Cable Diameter 10 mm IEC Plug E, Cord Connector (Rewireable), Straight Plug further types to KP (Outlet) Power entry modules without line filter 0607 0608 0609 607B 608B ... 4732 4733 4735 4736 9009 ... Mating Outlets/Connectors Appliance Outlet Overview complete IEC Appliance Outlet F, Screw-on Mounting, Front Side, Solder or Quick-connect Terminal IEC Appliance Outlet F, Snap-in Mounting, Front Side, Solder or Quick-connect Terminal IEC Appliance Outlet F or H, Screw-on Mounting, Front Side, Solder, PCB or Quick-connect Terminal IEC Appliance Outlet F or H, Screw-on Mounting, Front Side, Solder or Quick-connect Terminal Appliance Outlet further types to KP (Outlet) Connector Overview complete IEC Connector C15, Rewireable, Straight IEC Connector C15A, Rewireable, Straight IEC Connector C15A, Rewireable, Straight IEC Connector C15A, Rewireable, Angled IEC Connector C13, Rewireable, Angled Connector further types to KP (Outlet) Power Cord Overview complete Power Cord with IEC Connector C13, Angled Power Cord with IEC Connector C13, Angled Power Cord with IEC Connector C13, Angled Power Cord with IEC Connector C13, Angled Power Cord with IEC Connector C13 Power Cord further types to KP (Outlet) 0311 3011 3012 3013 3020 ... 0101 0102 0102-G 0112 4012 ... 4787 4788 5091 5092  The specifications, descriptions and illustrations indicated in this document are based on Connectors current information. All content is subject to modifications and amendments.