KP (Switch)
Power entry modules without line filter
https://www.schurter.com /PG05
IEC Appliance Inlet C14 with Line Switch 1- or 2-pole
Snap-in mounting
Screw-on mounting
KPF Filter Module
(not enclosed)
C14
See below:
Approvals and Compliances
70° C
Description
- Panel mount :
Sandwich/rear-side
- 2 Functions :
Appliance Inlet Protection class I , Line Switch 1‑ and 2‑ pole
- For PCB mounting
Characteristics
- Panel mount from rear or "sandwich" between top and bottom/side to
side panels
PCB mount with snap-in or screw-on feet (self tapping screws Ø 3 x 8
mm)
- All single elements are already wired
- Line switch non-illuminated
- Insulation cover on the rear-side
- Suitable for use in equipment according to IEC/UL 62368-1
Other versions on request
- Solder terminals
- Quick-connect terminals
- Line switch, illuminated (only 2-pole version)
- Line switch with other rocker marking
- For protection class II
References
Alternative: version with line filter KPF
We recommend for new applications DC21
Weblinks
pdf data sheet, html datasheet, General Product Information, Approvals,
Distributor-Stock-Check, Accessories, Detailed request for product
Newly available variants corresponding to V-Lock mating cordset. The connector is equipped with a notch intended for use with the latching cordset.
The cord latching system prevents against accidental removal of the cordset.
Technical Data
Ratings IEC
Ratings UL/CSA
Dielectric Strength
Allowable Operation Temperature
IP-Protection
Protection against electric
shock
Terminal
Panel Thickness S
Material: Housing
10 A / 250 VAC; 50 Hz
15 A / 250 VAC; 60 Hz
> 2.3 kVAC between L-N
> 2.8 kVAC between L/N-PE
(1 min/50 Hz)
-25 °C to 70 °C
Appliance inlet/-outlet
Line Switch
C14 acc. to IEC 60320-1,
UL 60320-1, CSA C22.2 no. 60320-1
(for cold conditions) pin-temperature 70
°C, 10 A, Protection Class I
Rocker switch 1-/2-pole, non-illuminated, acc. to IEC 61058-1
Technical Details
front side IP40 acc. to IEC 60529
Suitable for appliances with protection
class I acc. to IEC 61140
For PCB mounting Quick connect terminals 4.8 x 0.8 mm
Solder terminal on request
Snap-in: 1.5/2/2.5/3 mm
Thermoplastic, black, UL 94V-0
Approvals and Compliances
Connectors
1
KP (Switch)
Power entry modules without line filter
https://www.schurter.com /PG05
Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about
Approvals
SCHURTER products are designed for use in industrial environments. They have approvals from independent testing bodies according to national
and international standards. Products with specific characteristics and requirements such as required in the automotive sector according to IATF
16949, medical technology according to ISO 13485 or in the aerospace industry can be offered exclusively with customer-specific, individual agreements by SCHURTER.
Approvals
The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products.
Approval Reference Type: KP01
Approval Logo
Certificates
Certification Body
Description
VDE Approvals
VDE
Certificate Number: 40029369
UL Approvals
UL
UR File Number: E96454
CCC Approvals
CCC
CCC Certificate Number: 2019180204009410/2019180204010438
Design
Standard
Description
Designed according to
IEC 60320-1
Appliance couplers for household and similar general purposes
Designed according to
IEC 61058-1
Switches for appliances. Part 1. General requirements
Designed according to
UL 60320-1
Standard for Attachment Plugs and Receptacles
Designed according to
CSA C22.2 no. 60320-1
General Use Receptacles, Attachment Plugs, and Similar Wiring Devices
Design
Standard
Description
Suitable for applications acc.
IEC/UL 62368-1
Audio/video, information and communication technology equipment - Part
1: Safety requirements
Details
Initiator
Description
CE declaration of conformity
SCHURTER AG
The CE marking declares that the product complies with the applicable
requirements laid down in the harmonisation of Community legislation on
its affixing in accordance with EU Regulation 765/2008.
UKCA declaration of conformity
SCHURTER AG
The UKCA marking declares that the product complies with the applicable
requirements laid down in the British Amendment of Regulation (EC)
765/2008.
RoHS
SCHURTER AG
Directive RoHS 2011/65/EU, Amendment (EU) 2015/863
China RoHS
SCHURTER AG
The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March
2007. It is similar to the EU directive RoHS.
REACH
SCHURTER AG
On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration,
Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as
"REACH") entered into force.
SCHURTER AG
V-Lock system are based on a matching plug-dose combination. The
connector is equipped with a notch intended for use with the latching
cordset. The cord latching system prevents against accidental removal of
the cordset.
Product standards
Product standards that are referenced
Organization
Application standards
Application standards where the product can be used
Organization
Compliances
The product complies with following Guide Lines
Identification
2
Connectors
KP (Switch)
Power entry modules without line filter
https://www.schurter.com /PG05
Dimensions [mm]
For 2-pole inlet/switch, 2-pole inlet
fuseholder and inlet/outlet
For combinations
Inlet/switch 1-pole, inlet/fuseholder 1-pole
53.34
25.4
1.6
+0.1
0
D2
7.55
D2
X ±0.1
d1 = 6 ± 0.05 für (snap-in)
d1 = 3.6 (screw-on)
d2 = 2.1 + 0.1/-0 (screw-on)
Dimensions without tolerance: ≤ 15 = ± 0.05, ≥ 15 = ± 0,1
S and X see mounting holes
Sandwich mounting holes
Mounting holes for backside mounting
X ±0.1
32.3 ±0.1
32.3
32.3 ±0.1
Sandwich mounting holes
±0.1
18.5
10.16 10.16
1.6
D1
+0.1
0
3.82
S ±0.1 (16.45)
D1
25.4
10.16
27.94
5.08
7.62
13.97
X ±0.1
52.4 ±0.1
X = 48.4 at S = 1.5 and 2.5
X = 50.4 at S = 2.0 and 3.0
X = 48.4 at S = 1.5 and 2.5
X = 50.4 at S = 2.0 and 3.0
Screw-on mounting
56.1
2
31.2
52.1
36.5
2
R2
1.3
1.1
ø 5.9
1.1
4.5
A
2.5
2
18.5
32
36
27.8
2
0.8
1.3
20.2
6.2
53.34
16
S ±0.1
50.1
A = for PCB-thickness 1.2/1.6/2.0/2.4 mm
Additional quick connect terminal 4.8 x 0.8 mm
Connectors
3
KP (Switch)
Power entry modules without line filter
https://www.schurter.com /PG05
Snap-in mounting
56.1
2
31.2
52.1
36.5
2
R2
ø
1.1
4.5
1.3
1.1
1.6 ±0.1
2.9
2
4.5
18.5
32
36
27.8
2
0
5.9 -0.1
0.8
1.3
20.2
6.2
53.34
S ±0.1
16
50.1
Additional quick connect terminal 4.8 x 0.8 mm
s = panel thickness
Assembly Instructions
Stable snap feet requires minimal insertion force
Module must lay flat on the PCB when soldering
Screw-on mount
uses self-tapping screws
Insertion from behind
4
Connectors
KP (Switch)
Power entry modules without line filter
https://www.schurter.com /PG05
"Sandwich" mounting with split enclosure panels
Diagrams
L
N
L N
Inlet with line switch
All Variants
Panel mounting
Panel Thickness
s [mm]
PCB [mm]
Line Switch
Fuseholder
Connector
V-Lock
Order Number
Snap-in
2
1.6
1-pole
-
-
KP01.1212.11
Snap-in
2
1.6
2-pole
-
-
KP01.1112.11
Snap-in
3
1.6
1-pole
-
-
KP01.1213.11
Snap-in
3
1.6
2-pole
-
-
KP01.1113.11
Screw
2
1.2/1.6/2.0/2.4
1-pole
-
-
KP01.1252.11
Screw
2
1.2/1.6/2.0/2.4
2-pole
-
-
KP01.1152.11
Screw
3
1.2/1.6/2.0/2.4
1-pole
-
-
KP01.1253.11
Screw
3
1.2/1.6/2.0/2.4
2-pole
-
-
KP01.1153.11
█
█
█ Most Popular.
Availability for all products can be searched real-time:https://www.schurter.com/en/Stock-Check/Stock-Check-SCHURTER
Type KP without cover: KP01.XXXX.XX90
Ground Terminal with solder pin: KP01.XXXX.X3XX
Packaging unit
50 Pcs
Mating Outlets/Connectors
Category / Description
Appliance Outlet Overview complete
4787, Mounting: Screw-on mounting, Appliance Outlet: IEC Solder terminals, 10 A, Suitable for appliances with protection class I
4787
4788, Mounting: Snap-in version, Appliance Outlet: IEC Solder / Quick Connect, 10 A, Suitable for appliances with
protection class I
4788
IEC Appliance Outlet F or H, Screw-on Mounting, Front Side, Solder, PCB or Quick-connect Terminal
5091
Connectors
5
KP (Switch)
Power entry modules without line filter
https://www.schurter.com /PG05
Connector Overview complete
4782 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13
4782
4785 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13
4785
4300-06 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13
4300-06
4781 Mounting: Power Cord, Cable, Connector: IEC C15
4781
4784 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C15
4784
Mating Outlets/Connectors shuttered
Connector Overview complete
4783 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13
4783
Power Cord Overview complete
VAC13KS, Overview, V-Lock cord retaining, diverse Connector IEC C13, diverse, black
VAC13KS
11.08.2023
6
Connectors
The specifications, descriptions and illustrations indicated in this document are based on current
information. All content is subject to modifications and amendments. Information furnished is believed
to be accurate and reliable. However, users should independently evaluate the suitability and test each
product selected for their own applications.
