Power entry modules without line filter
KP (Outlet)
www.schurter.com/pg05
IEC Appliance Inlet C14 with Appliance Outlet F
Inlet with outlet
KPF Filter Module (not enclosed)
C14
70° C
F
70° C
Description
- Panel Mount: Sandwich/rear-side - 2 Functions: Appliance Inlet Protection class I, Connector Protection class I - For PCB mounting - Alternative: version with line filter KPF; KPS
Characteristics
Approvals
- Panel mount from rear or "sandwich" between top and bottom/side to side panels PCB mount with snap-in or screw-on feet (self tapping screws Ø 3 x 8 mm) - All single elements are already wired - Insulation cover on the rear-side - Qualified for use in equipment according IEC/EN 60950
- VDE License Number: 40008635 - UL License Number: E103791 - CSA License Number: 38456
Other versions on request
- Solder terminals - Quick-connect terminals - For protection class II
References Weblinks
General Product Information Approvals, RoHS, CHINA-RoHS, Mating Connectors, e-Store, Distributor-Stock-Check, Accessories
Technical Data
Ratings IEC Ratings UL/CSA Dielectric Strength 10 A / 250 VAC; 50 Hz 10 A / 125 VAC; 60 Hz > 2.3 kVAC between L-N > 2.8 kVAC between L/N-PE (1 min/50 Hz) -25 °C to 70 °C from front side IP 40 acc. to IEC 60529 Suitable for appliances with protection class 1 acc. to IEC 61140 For PCB mounting Quick connect terminals 4.8 x 0.8 mm Solder terminal on request Snap-in: 1.5/2/2.5/3 mm Thermoplastic, black, UL 94V-0 Appliance Inlet / Appliance Outlet C14 acc. to IEC/EN 60320-1 and F acc. to IEC/EN 60320-2-2, UL 498, CSA C22.2 no. 42 (for cold conditions) pin-temperature 70 °C, 10 A, Protection Class 1
Allowable Operation Temp. Degree of Protection Protection Class Terminal
Panel Thickness s Material: Housing
Connectors
KP (Outlet)
www.schurter.com/pg05 Dimensions Screw on PCB mounting
56.1 2 2 52.1 2 R2 31.2 27.8 2 2
Power entry modules without line filter
Snap-in mounting
56.1 mm
56.1 52.1 2 R2 31.2 27.8
36.5
18.5
4.5
1.6 ±0.1
2
2.5
A
2
4.5
2.9
18.5 0.8 20.2 1.3 6.2 1.3 1.1 53.34 50.1 4.5
1.1 1.1
1.3 ø 5.9 53.34 50.1
36.5
36
32
36
32
1.1
0.8 20.2
1.3 6.2
ø 5.9 -0.1
0
16
S ±0.1
A = for PCB-thickness 1.2/1.6/2.0/2.4 mm Additional quick connect terminal 4.8 x 0.8 mm
Additional quick connect terminal 4.8 x 0.8 mm s = panel thickness
For 2-pole inlet/switch, 2-pole inlet fuseholder and inlet/outlet
53.34 25.4 7.62 3.82 27.94
+0.1 0
for combinations: inlet/switch 1-pole Inlet/ fuseholder 1-pole
13.97 10.16 5.08 D1 25.4 1.6
+0.1 0
S ±0.1
(16.45)
D1
D2 X ±0.1
1.6
D2 7.55
S
±0.1
S and X see mounting holes
Mounting holes for backside mounting
Sandwich mounting holes
Sandwich mounting holes
32.3 ±0.1
32.3 ±0.1
18.5
X ±0.1 52.4 ±0.1
32.3 ±0.1
X ±0.1
X = 48.4 at S = 1.5 and 2.5 X = 50.4 at S = 2.0 and 3.0
X = 48.4 at S = 1.5 and 2.5 X = 50.4 at S = 2.0 and 3.0
Dimensions
Stable snap feet requires minimal insertion force
Module must lay flat on the PCB when soldering
Screw-on mount uses self-tapping screws
Connectors
16
10.16 10.16
Power entry modules without line filter
KP (Outlet)
www.schurter.com/pg05
Insertion from behind
Other dimensions as for 2-poles d1 = 6 ± 0.05 for (snap-in) d1 = 3.6 (screw-on) d2 = 2 ± 0.1 (screw-on) Dimensions without tolerance: ≤ 15 = ± 0.05; ≥ 15 = ± 0.1
"Sandwich" mounting with split enclosure panels
Diagrams
Inlet with outlet
Derating Curves 1-pole
Admissible power acceptance in Watt
2.0
2-pole
Admissible power acceptance in Watt per pole
1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0.0 0 20 40 60 80 100 I = 1.0 In I = 0.7 In I = < < In
1.5 I = 1.0 In 1.0 I = 0.7 In I = < < In 0.5
0.0 0 20 40 60 80 100
Ambient air temperature Ta °C
Ambient air temperature Ta °C
Variants
Panel mounting Screw Screw Snap-in Snap-in Panel Thickness s [mm] 2 3 2 3 PCB [mm] 1.2/1.6/2.0/2.4 1.2/1.6/2.0/2.4 1.6 1.6 Line Switch Fuseholder Connector F F F F Order Number KP01.1052.01 KP01.1053.01 KP01.1012.01 KP01.1013.01
Type KP without cover: KP01.XXXX.XX90 Ground Terminal with solder pin: KP01.XXXX.X3XX
Packaging unit
50 Pcs
Connectors
KP (Outlet)
www.schurter.com/pg05 Mating Inlets/Plugs
Category / Description Interconnection Cord Overview complete Interconnection Cord with IEC Plug E, Angled Interconnection Cord with IEC Plug E, Angled Interconnection Cord with IEC Plug E, Straight Interconnection Cord with IEC Plug G, Angled Interconnection Cord with IEC Plug G, Angled Interconnection Cord further types to KP (Outlet) Plug Overview complete IEC Plug E, Cord Connector (Rewireable), Straight, max. cable Diameter 8.5 mm IEC Plug E, Cord Connector (Rewireable), Angled, max. Cable Diameter 10 mm IEC Plug E, Cord Connector (Rewireable), Straight, max. Cable Diameter 10 mm IEC Plug E, Cord Connector (Rewireable), Angled, max. Cable Diameter 10 mm IEC Plug E, Cord Connector (Rewireable), Straight Plug further types to KP (Outlet)
Power entry modules without line filter
0607 0608 0609 607B 608B ...
4732 4733 4735 4736 9009 ...
Mating Outlets/Connectors
Appliance Outlet Overview complete IEC Appliance Outlet F, Screw-on Mounting, Front Side, Solder or Quick-connect Terminal IEC Appliance Outlet F, Snap-in Mounting, Front Side, Solder or Quick-connect Terminal IEC Appliance Outlet F or H, Screw-on Mounting, Front Side, Solder, PCB or Quick-connect Terminal IEC Appliance Outlet F or H, Screw-on Mounting, Front Side, Solder or Quick-connect Terminal Appliance Outlet further types to KP (Outlet) Connector Overview complete IEC Connector C15, Rewireable, Straight IEC Connector C15A, Rewireable, Straight IEC Connector C15A, Rewireable, Straight IEC Connector C15A, Rewireable, Angled IEC Connector C13, Rewireable, Angled Connector further types to KP (Outlet) Power Cord Overview complete Power Cord with IEC Connector C13, Angled Power Cord with IEC Connector C13, Angled Power Cord with IEC Connector C13, Angled Power Cord with IEC Connector C13, Angled Power Cord with IEC Connector C13 Power Cord further types to KP (Outlet) 0311 3011 3012 3013 3020 ... 0101 0102 0102-G 0112 4012 ... 4787 4788 5091 5092
The specifications, descriptions and illustrations indicated in this document are based on Connectors current information. All content is subject to modifications and amendments.
