KP01145201

Power entry modules without line filter www.schurter.com/pg05 IEC Appliance Inlet C14 with Fuseholder 1- or 2-pole KP (FH) Medical fuse drawer Inlet with fuseholder (5x20 mm) KPF Filter Module (not enclosed) C14 70° C Description - Panel Mount: Sandwich/rear-side - 2 Functions: Appliance Inlet Protection class I, Fuseholder for fuse-links 5 x 20 mm 1- or 2-pole - For PCB mounting - Alternative: version with line filter KPF; KPS Characteristics Approvals - VDE License Number: 40008635 - UL License Number: E93617 - CSA License Number: 38456 - Panel mount from rear or "sandwich" between top and bottom/side to side panels PCB mount with snap-in or screw-on feet (self tapping screws Ø 3 x 8 mm) - All single elements are already wired - Fuse drawer meets requirements of medical standard IEC/EN 60601-1 The fuse drawer can only be opened with the aid of a tool The fuseholder is accessible from the equipment front - Insulation cover on the rear-side - Qualified for use in equipment according IEC/EN 60950 Other versions on request - Solder terminals - Quick-connect terminals - For protection class II References Weblinks General Product Information Approvals, RoHS, CHINA-RoHS, Mating Connectors, e-Store, Distributor-Stock-Check, Accessories Technical Data Ratings IEC Ratings UL/CSA Dielectric Strength 10 A / 250 VAC; 50 Hz 10 A / 125 VAC; 60 Hz > 2.3 kVAC between L-N > 2.8 kVAC between L/N-PE (1 min/50 Hz) -25 °C to 70 °C from front side IP 40 acc. to IEC 60529 Suitable for appliances with protection class 1 acc. to IEC 61140 For PCB mounting Quick connect terminals 4.8 x 0.8 mm Solder terminal on request Snap-in: 1.5/2/2.5/3 mm Thermoplastic, black, UL 94V-0 Appliance Inlet C14 acc. to IEC/EN 60320-1, UL 498, CSA C22.2 no. 42 (for cold conditions) pin-temperature 70 °C, 10 A, Protection Class 1 1 or 2 pole, Shocksafe category PC2 acc. to IEC 60127-6, for fuse-links 5 x 20 mm 5 x 20: 2 W (1 pole)/ 1.6 W (2-pole) per pole Admissible power acceptance at higher ambient temperature see derating curves Fuseholder Allowable Operation Temp. Degree of Protection Protection Class Terminal Rated Power Acceptance @ Ta 23 °C Power Acceptance @ Ta > 23°C Panel Thickness s Material: Housing Connectors  KP (FH) www.schurter.com/pg05 Dimensions Screw on PCB mounting 56.1 2 2 52.1 2 R2 31.2 27.8 2 2 Power entry modules without line filter Snap-in mounting 56.1 mm 56.1 52.1 2 R2 31.2 27.8 36.5 18.5 4.5 1.6 ±0.1 2 2.5 A 2 4.5 2.9 18.5 0.8 20.2 1.3 6.2 1.3 1.1 53.34 50.1 4.5 1.1 1.1 1.3 ø 5.9 53.34 50.1 36.5 36 32 36 32 1.1 0.8 20.2 1.3 6.2 ø 5.9 -0.1 0 16 S ±0.1 A = for PCB-thickness 1.2/1.6/2.0/2.4 mm Additional quick connect terminal 4.8 x 0.8 mm Additional quick connect terminal 4.8 x 0.8 mm s = panel thickness For 2-pole inlet/switch, 2-pole inlet fuseholder and inlet/outlet 53.34 25.4 7.62 3.82 27.94 +0.1 0 for combinations: inlet/switch 1-pole Inlet/ fuseholder 1-pole 13.97 10.16 5.08 D1 25.4 1.6 +0.1 0 S ±0.1 (16.45) D1 D2 X ±0.1 1.6 D2 7.55 S ±0.1 S and X see mounting holes Mounting holes for backside mounting Sandwich mounting holes Sandwich mounting holes 32.3 ±0.1 32.3 ±0.1 18.5 X ±0.1 52.4 ±0.1 32.3 ±0.1 X ±0.1 X = 48.4 at S = 1.5 and 2.5 X = 50.4 at S = 2.0 and 3.0 X = 48.4 at S = 1.5 and 2.5 X = 50.4 at S = 2.0 and 3.0 Dimensions Stable snap feet requires minimal insertion force Module must lay flat on the PCB when soldering Screw-on mount uses self-tapping screws  Connectors 16 10.16 10.16 Power entry modules without line filter www.schurter.com/pg05 KP (FH) Insertion from behind Other dimensions as for 2-poles d1 = 6 ± 0.05 for (snap-in) d1 = 3.6 (screw-on) d2 = 2 ± 0.1 (screw-on) Dimensions without tolerance: ≤ 15 = ± 0.05; ≥ 15 = ± 0.1 "Sandwich" mounting with split enclosure panels Diagrams Inlet with fuseholder (5 x 20 mm) Variants Panel mounting Screw Screw Screw Screw Snap-in Snap-in Snap-in Snap-in Panel Thickness s [mm] 2 2 3 3 2 2 3 3 PCB [mm] 1.2/1.6/2.0/2.4 1.2/1.6/2.0/2.4 1.2/1.6/2.0/2.4 1.2/1.6/2.0/2.4 1.6 1.6 1.6 1.6 Line Switch Fuseholder 1-pole 2-pole 1-pole 2-pole 1-pole 2-pole 1-pole 2-pole Connector Order Number KP01.1452.01 KP01.1352.01 KP01.1453.01 KP01.1353.01 KP01.1412.01 KP01.1312.01 KP01.1413.01 KP01.1313.01 Type KP without cover: KP01.XXXX.XX90 Ground Terminal with solder pin: KP01.XXXX.X3XX Packaging unit 50 Pcs Mating Outlets/Connectors Category / Description Appliance Outlet Overview complete IEC Appliance Outlet F, Screw-on Mounting, Front Side, Solder or Quick-connect Terminal IEC Appliance Outlet F, Snap-in Mounting, Front Side, Solder or Quick-connect Terminal IEC Appliance Outlet F or H, Screw-on Mounting, Front Side, Solder, PCB or Quick-connect Terminal IEC Appliance Outlet F or H, Screw-on Mounting, Front Side, Solder or Quick-connect Terminal Appliance Outlet further types to KP (FH) 4787 4788 5091 5092 Connectors  KP (FH) www.schurter.com/pg05 Connector Overview complete IEC Connector C15, Rewireable, Straight IEC Connector C15A, Rewireable, Straight IEC Connector C15A, Rewireable, Straight IEC Connector C15A, Rewireable, Angled IEC Connector C13, Rewireable, Angled Connector further types to KP (FH) Power Cord Overview complete Power Cord with IEC Connector C13, Angled Power Cord with IEC Connector C13, Angled Power Cord with IEC Connector C13, Angled Power Cord with IEC Connector C13, Angled Power Cord with IEC Connector C13 Power Cord further types to KP (FH) Power entry modules without line filter 0101 0102 0102-G 0112 4012 ... 0311 3011 3012 3013 3020 ...  The specifications, descriptions and illustrations indicated in this document are based on Connectors current information. All content is subject to modifications and amendments.